Re: libata errors with smartctl on 2.6.24, WD3200AAKS and nVidia AHCI

Previous message: [thread] [date] [author]
Next message: [thread] [date] [author]
From: Tvrtko A. Ursulin
Date: Tuesday, May 13, 2008 - 11:58 pm

On Wednesday 14 May 2008 06:44:12 Tejun Heo wrote:

Of course:

root@sol:~# hdparm -I /dev/sda

/dev/sda:

ATA device, with non-removable media
        Model Number:       WDC WD3200AAKS-00VYA0
        Serial Number:      WD-WCARW0059893
        Firmware Revision:  12.01B02
Standards:
        Supported: 8 7 6 5
        Likely used: 8
Configuration:
        Logical         max     current
        cylinders       16383   16383
        heads           16      16
        sectors/track   63      63
        --
        CHS current addressable sectors:   16514064
        LBA    user addressable sectors:  268435455
        LBA48  user addressable sectors:  625142448
        device size with M = 1024*1024:      305245 MBytes
        device size with M = 1000*1000:      320072 MBytes (320 GB)
Capabilities:
        LBA, IORDY(can be disabled)
        Queue depth: 32
        Standby timer values: spec'd by Standard, with device specific minimum
        R/W multiple sector transfer: Max = 16  Current = 0
        Recommended acoustic management value: 128, current value: 254
        DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6
             Cycle time: min=120ns recommended=120ns
        PIO: pio0 pio1 pio2 pio3 pio4
             Cycle time: no flow control=120ns  IORDY flow control=120ns
Commands/features:
        Enabled Supported:
                SMART feature set
                Security Mode feature set
           *    Power Management feature set
           *    Write cache
           *    Look-ahead
           *    Host Protected Area feature set
           *    WRITE_BUFFER command
           *    READ_BUFFER command
           *    NOP cmd
           *    DOWNLOAD_MICROCODE
                Power-Up In Standby feature set
           *    SET_FEATURES required to spinup after power up
                SET_MAX security extension
                Automatic Acoustic Management feature set
           *    48-bit Address feature set
           *    Device Configuration Overlay feature set
           *    Mandatory FLUSH_CACHE
           *    FLUSH_CACHE_EXT
           *    SMART error logging
           *    SMART self-test
           *    General Purpose Logging feature set
           *    64-bit World wide name
           *    Segmented DOWNLOAD_MICROCODE
           *    SATA-I signaling speed (1.5Gb/s)
           *    SATA-II signaling speed (3.0Gb/s)
           *    Native Command Queueing (NCQ)
           *    Host-initiated interface power management
           *    Phy event counters
                DMA Setup Auto-Activate optimization
           *    Software settings preservation
           *    SMART Command Transport (SCT) feature set
           *    SCT Long Sector Access (AC1)
           *    SCT LBA Segment Access (AC2)
           *    SCT Error Recovery Control (AC3)
           *    SCT Features Control (AC4)
           *    SCT Data Tables (AC5)
                unknown 206[12] (vendor specific)
                unknown 206[13] (vendor specific)
Security:
        Master password revision code = 65534
                supported
        not     enabled
        not     locked
        not     frozen
        not     expired: security count
                supported: enhanced erase
        88min for SECURITY ERASE UNIT. 88min for ENHANCED SECURITY ERASE UNIT.
Logical Unit WWN Device Identifier: 50014ee1485655
        NAA             : 5
        IEEE OUI        : 14ee
        Unique ID       : 1485655
Checksum: correct
root@sol:~# lspci -nn
00:00.0 Host bridge [0600]: nVidia Corporation Unknown device [10de:07c1] (rev a2)
00:00.1 RAM memory [0500]: nVidia Corporation nForce 630i memory controller [10de:07cb] (rev a2)
00:01.0 RAM memory [0500]: nVidia Corporation nForce 630i memory controller [10de:07cd] (rev a1)
00:01.1 RAM memory [0500]: nVidia Corporation nForce 630i memory controller [10de:07ce] (rev a1)
00:01.2 RAM memory [0500]: nVidia Corporation nForce 630i memory controller [10de:07cf] (rev a1)
00:01.3 RAM memory [0500]: nVidia Corporation nForce 630i memory controller [10de:07d0] (rev a1)
00:01.4 RAM memory [0500]: nVidia Corporation nForce 630i memory controller [10de:07d1] (rev a1)
00:01.5 RAM memory [0500]: nVidia Corporation nForce 630i memory controller [10de:07d2] (rev a1)
00:01.6 RAM memory [0500]: nVidia Corporation nForce 630i memory controller [10de:07d3] (rev a1)
00:02.0 RAM memory [0500]: nVidia Corporation nForce 630i memory controller [10de:07d6] (rev a1)
00:03.0 ISA bridge [0601]: nVidia Corporation Unknown device [10de:07d7] (rev a2)
00:03.1 SMBus [0c05]: nVidia Corporation Unknown device [10de:07d8] (rev a1)
00:03.2 RAM memory [0500]: nVidia Corporation Unknown device [10de:07d9] (rev a1)
00:03.4 RAM memory [0500]: nVidia Corporation Unknown device [10de:07c8] (rev a1)
00:04.0 USB Controller [0c03]: nVidia Corporation GeForce 7100/nForce 630i [10de:07fe] (rev a1)
00:04.1 USB Controller [0c03]: nVidia Corporation GeForce 7100/nForce 630i [10de:056a] (rev a1)
00:08.0 IDE interface [0101]: nVidia Corporation Unknown device [10de:056c] (rev a1)
00:09.0 Audio device [0403]: nVidia Corporation MCP73 High Definition Audio [10de:07fc] (rev a1)
00:0a.0 PCI bridge [0604]: nVidia Corporation Unknown device [10de:056d] (rev a1)
00:0b.0 PCI bridge [0604]: nVidia Corporation Unknown device [10de:056e] (rev a1)
00:0c.0 PCI bridge [0604]: nVidia Corporation Unknown device [10de:056f] (rev a1)
00:0d.0 PCI bridge [0604]: nVidia Corporation Unknown device [10de:056f] (rev a1)
00:0e.0 SATA controller [0106]: nVidia Corporation GeForce 7100/nForce 630i [10de:07f4] (rev a2)
00:0f.0 Ethernet controller [0200]: nVidia Corporation MCP73 Ethernet [10de:07dc] (rev a2)
00:10.0 VGA compatible controller [0300]: nVidia Corporation GeForce 7100/nForce 630i [10de:07e1] (rev a2)
01:07.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link) [104c:8024]

Tvrtko

--
Previous message: [thread] [date] [author]
Next message: [thread] [date] [author]

Messages in current thread:
Re: libata errors with smartctl on 2.6.24, WD3200AAKS and ..., Tvrtko A. Ursulin, (Sun Apr 13, 12:34 am)
Re: libata errors with smartctl on 2.6.24, WD3200AAKS and ..., Tvrtko A. Ursulin, (Mon Apr 14, 11:21 pm)
Re: libata errors with smartctl on 2.6.24, WD3200AAKS and ..., Tvrtko A. Ursulin, (Tue May 13, 11:58 pm)