Cc: Glauber Costa <gcosta@...>, Glauber Costa <glommer@...>, Linus Torvalds <torvalds@...>, Andrew Morton <akpm@...>, H. Peter Anvin <hpa@...>, Theodore Ts'o <tytso@...>, Carlos R. Mafra <crmafra2@...>, Rafael J. Wysocki <rjw@...>, <linux-kernel@...>, Thomas Gleixner <tglx@...>
applied, thanks Hugh! You've once again proven that you are worth your
weight in gold and more. Patch looks very clean and simplifies the code.
hehe :)
ob'note: would be nice to have the suspend+resume self-test/debug patch
below upstream. It programs the RTC to a 5 second sleep and resumes the
computer, which then self-wakeups afterwards.
Ingo
-------------------------------->
Subject: suspend+resume self-test
From: David Brownell <david-b@pacbell.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
kernel/power/Kconfig | 10 +++
kernel/power/main.c | 163 +++++++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 173 insertions(+)
Index: linux/kernel/power/Kconfig
===================================================================
--- linux.orig/kernel/power/Kconfig
+++ linux/kernel/power/Kconfig
@@ -94,6 +94,16 @@ config SUSPEND
powered and thus its contents are preserved, such as the
suspend-to-RAM state (e.g. the ACPI S3 state).
+config PM_TEST_SUSPEND
+ bool "Test suspend/resume and wakealarm during bootup"
+ depends on SUSPEND && PM_DEBUG && RTC_LIB=y
+ ---help---
+ This option will suspend your machine during bootup, and make
+ it wake up a few seconds later using the RTC's wakeup alarm.
+
+ You probably want to have your system's RTC driver statically
+ linked, ensuring that it's available when this test runs.
+
config SUSPEND_FREEZER
bool "Enable freezer for suspend to RAM/standby" \
if ARCH_WANTS_FREEZER_CONTROL || BROKEN
Index: linux/kernel/power/main.c
===================================================================
--- linux.orig/kernel/power/main.c
+++ linux/kernel/power/main.c
@@ -132,6 +132,52 @@ static inline int suspend_test(int level
#ifdef CONFIG_SUSPEND
+#ifdef CONFIG_PM_TEST_SUSPEND
+
+/*
+ * We test the system suspend code by setting an RTC wakealarm a short
+ * time in the future, then suspending. Suspending the devices won't
+ * normally take long ... some systems only need a few milliseconds.
+ *
+ * The time it takes is system-specific though, so when we test this
+ * during system bootup we allow a LOT of time.
+ */
+#define TEST_SUSPEND_SECONDS 5
+
+static unsigned long suspend_test_start_time;
+
+static void suspend_test_start(void)
+{
+ /* FIXME Use better timebase than "jiffies", ideally a clocksource.
+ * What we want is a hardware counter that will work correctly even
+ * during the irqs-are-off stages of the suspend/resume cycle...
+ */
+ suspend_test_start_time = jiffies;
+}
+
+static void suspend_test_finish(const char *label)
+{
+ long nj = jiffies - suspend_test_start_time;
+ unsigned msec;
+
+ msec = jiffies_to_msecs((nj >= 0) ? nj : -nj);
+ pr_info("PM: %s took %d.%03d seconds\n", label,
+ msec / 1000, msec % 1000);
+ WARN_ON_ONCE(msec > ((TEST_SUSPEND_SECONDS+5) * 1000));
+}
+
+#else
+
+static void suspend_test_start(void)
+{
+}
+
+static void suspend_test_finish(const char *label)
+{
+}
+
+#endif
+
/* This is just an arbitrary number */
#define FREE_PAGE_NUMBER (100)
@@ -264,11 +310,14 @@ int suspend_devices_and_enter(suspend_st
goto Close;
}
suspend_console();
+
+ suspend_test_start();
error = device_suspend(PMSG_SUSPEND);
if (error) {
printk(KERN_ERR "PM: Some devices failed to suspend\n");
goto Resume_console;
}
+ suspend_test_finish("suspend devices");
if (suspend_test(TEST_DEVICES))
goto Resume_devices;
@@ -291,7 +340,9 @@ int suspend_devices_and_enter(suspend_st
if (suspend_ops->finish)
suspend_ops->finish();
Resume_devices:
+ suspend_test_start();
device_resume();
+ suspend_test_finish("resume devices");
Resume_console:
resume_console();
Close:
@@ -515,3 +566,115 @@ static int __init pm_init(void)
}
core_initcall(pm_init);
+
+
+#ifdef CONFIG_PM_TEST_SUSPEND
+
+#include <linux/rtc.h>
+
+/*
+ * To test system suspend, we need a hands-off mechanism to resume the
+ * system. RTCs with wakeup alarms are the the most common mechanism
+ * that's self-contained.
+ */
+
+static void __init test_wakealarm(struct rtc_device *rtc, suspend_state_t state)
+{
+ static char err_readtime [] __initdata =
+ KERN_ERR "PM: can't read %s time, err %d\n";
+ static char err_wakealarm [] __initdata =
+ KERN_ERR "PM: can't set %s wakealarm, err %d\n";
+ static char err_suspend [] __initdata =
+ KERN_ERR "PM: suspend test failed, error %d\n";
+ static char info_test [] __initdata =
+ KERN_INFO "PM: test RTC wakeup from '%s' suspend\n";
+
+ unsigned long now;
+ struct rtc_wkalrm alm;
+ int status;
+
+ /* this may fail if the RTC hasn't been initialized */
+ status = rtc_read_time(rtc, &alm.time);
+ if (status < 0) {
+ printk(err_readtime, rtc->dev.bus_id, status);
+ return;
+ }
+ rtc_tm_to_time(&alm.time, &now);
+
+ memset(&alm, 0, sizeof alm);
+ rtc_time_to_tm(now + TEST_SUSPEND_SECONDS, &alm.time);
+ alm.enabled = true;
+
+ status = rtc_set_alarm(rtc, &alm);
+ if (status < 0) {
+ printk(err_wakealarm, rtc->dev.bus_id, status);
+ return;
+ }
+
+ if (state == PM_SUSPEND_MEM) {
+ printk(info_test, pm_states[state]);
+ status = pm_suspend(state);
+ if (status == -ENODEV)
+ state = PM_SUSPEND_STANDBY;
+ }
+ if (state == PM_SUSPEND_STANDBY) {
+ printk(info_test, pm_states[state]);
+ status = pm_suspend(state);
+ }
+ if (status < 0)
+ printk(err_suspend, status);
+}
+
+static int __init has_wakealarm(struct device *dev, void *name_ptr)
+{
+ struct rtc_device *candidate = to_rtc_device(dev);
+
+ if (!candidate->ops->set_alarm)
+ return 0;
+ if (!device_may_wakeup(candidate->dev.parent))
+ return 0;
+
+ *(char **)name_ptr = dev->bus_id;
+ return 1;
+}
+
+/*
+ * We normally test Suspend-to-RAM, with standby as a backup when
+ * the system doesn't support that state. But we also need to be
+ * able to disable the powerup test, and tell it to ignore STR since
+ * the RTC may not work then.
+ */
+static suspend_state_t test_state __initdata = PM_SUSPEND_MEM;
+
+static int __init setup_test_suspend(char *value)
+{
+ /* FIXME accept "standby", etc */
+ test_state = PM_SUSPEND_ON;
+ return 0;
+}
+__setup("test_suspend", setup_test_suspend);
+
+static int __init test_suspend(void)
+{
+ static char warn_no_rtc[] __initdata =
+ KERN_WARNING "PM: no wakealarm-capable RTC driver is ready\n";
+
+ char *pony = NULL;
+ struct rtc_device *rtc = NULL;
+
+ class_find_device(rtc_class, &pony, has_wakealarm);
+ if (pony)
+ rtc = rtc_class_open(pony);
+
+ if (rtc) {
+ if (test_state != PM_SUSPEND_ON)
+ test_wakealarm(rtc, test_state);
+ rtc_class_close(rtc);
+ } else
+ printk(warn_no_rtc);
+
+ return 0;
+}
+late_initcall(test_suspend);
+
+#endif /* CONFIG_PM_TEST_SUSPEND */
--
