login
Search
Hi Mike, On Wed, 30 Apr 2008 15:03:12 +0200 Mike Galbraith <efault@gmx.de> wrote:There are two different issues here. The first one is not finding the symbol. This is weird. Here, everything looks ok: [ 3929.936478] Linux video capture interface: v2.00 [ 3929.948852] saa7130/34: v4l2 driver version 0.2.14 loaded [ 3929.949245] saa7133[0]: found at 0000:06:00.0, rev: 209, irq: 20, latency: 64, mmio: 0x8c000000 [ 3929.949439] saa7133[0]: subsystem: 4e42:3502, board: LifeView FlyDVB-T Hybrid Cardbus/MSI TV @nywhere A/D NB [card=94,autodetected] [ 3929.949673] saa7133[0]: board init: gpio is 10000 [ 3930.034191] saa7133[0]: i2c eeprom 00: 42 4e 02 35 54 20 1c 00 43 43 a9 1c 55 d2 b2 92 [ 3930.034244] saa7133[0]: i2c eeprom 10: 00 00 62 08 ff 20 ff ff ff ff ff ff ff ff ff ff [ 3930.034312] saa7133[0]: i2c eeprom 20: 01 40 01 03 03 01 01 03 08 ff 01 eb ff ff ff ff [ 3930.034380] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 3930.034448] saa7133[0]: i2c eeprom 40: ff 21 00 c2 96 10 05 01 01 16 32 15 ff ff ff ff [ 3930.034517] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 3930.034584] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 3930.034653] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 3930.034721] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 3930.034788] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 3930.034857] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 3930.034926] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 3930.034995] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 3930.035063] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 3930.035133] saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 3930.035202] saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 3930.083461] tuner' 1-004b: tda829x detected [ 3930.083470] tuner' 1-004b: Setting mode_mask to 0x0e [ 3930.083475] tuner' 1-004b: chip found @ 0x96 (saa7133[0]) [ 3930.083482] tuner' 1-004b: tuner 0x4b: Tuner type absent [ 3930.080597] tuner' 1-004b: TUNER_SET_TYPE_ADDR [ 3930.080607] tuner' 1-004b: Calling set_type_addr for type=54, addr=0xff, mode=0x0e, config=0x00 [ 3930.080612] tuner' 1-004b: defining GPIO callback [ 3930.115546] tda829x 1-004b: setting tuner address to 61 [ 3930.155513] tda829x 1-004b: type set to tda8290+75a [ 3930.183856] tuner' 1-004b: type set to tda8290+75a [ 3930.183860] tuner' 1-004b: tv freq set to 400.00 [ 3930.779947] tuner' 1-004b: saa7133[0] tuner' I2C addr 0x96 with type 54 used for 0x0e The other one is that the error handling seems to be incomplete on both tuner-core and saa7134-dvb. Please try this patch. It should avoid an OOPS, if attach fails. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> diff -r 341e0cd5c1a4 linux/drivers/media/video/saa7134/saa7134-dvb.c --- a/linux/drivers/media/video/saa7134/saa7134-dvb.c Wed Apr 30 11:40:17 2008 +0000 +++ b/linux/drivers/media/video/saa7134/saa7134-dvb.c Wed Apr 30 12:16:38 2008 -0300 @@ -541,19 +541,23 @@ return 0; } -static void configure_tda827x_fe(struct saa7134_dev *dev, struct tda1004x_config *cdec_conf, - struct tda827x_config *tuner_conf) +static int configure_tda827x_fe(struct saa7134_dev *dev, + struct tda1004x_config *cdec_conf, + struct tda827x_config *tuner_conf) { dev->dvb.frontend = dvb_attach(tda10046_attach, cdec_conf, &dev->i2c_adap); if (dev->dvb.frontend) { if (cdec_conf->i2c_gate) dev->dvb.frontend->ops.i2c_gate_ctrl = tda8290_i2c_gate_ctrl; - if (dvb_attach(tda827x_attach, dev->dvb.frontend, cdec_conf->tuner_address, - &dev->i2c_adap, tuner_conf) == NULL) { - wprintk("no tda827x tuner found at addr: %02x\n", + if (dvb_attach(tda827x_attach, dev->dvb.frontend, + cdec_conf->tuner_address, + &dev->i2c_adap, tuner_conf)) + return 0; + + wprintk("no tda827x tuner found at addr: %02x\n", cdec_conf->tuner_address); - } } + return -EINVAL; } /* ------------------------------------------------------------------ */ @@ -1000,7 +1004,9 @@ break; case SAA7134_BOARD_FLYDVBTDUO: case SAA7134_BOARD_FLYDVBT_DUO_CARDBUS: - configure_tda827x_fe(dev, &tda827x_lifeview_config, &tda827x_cfg_0); + if (configure_tda827x_fe(dev, &tda827x_lifeview_config, + &tda827x_cfg_0) < 0) + goto dettach_frontend; break; case SAA7134_BOARD_PHILIPS_EUROPA: case SAA7134_BOARD_VIDEOMATE_DVBT_300: @@ -1025,36 +1031,52 @@ } break; case SAA7134_BOARD_KWORLD_DVBT_210: - configure_tda827x_fe(dev, &kworld_dvb_t_210_config, &tda827x_cfg_2); + if (configure_tda827x_fe(dev, &kworld_dvb_t_210_config, + &tda827x_cfg_2) < 0) + goto dettach_frontend; break; case SAA7134_BOARD_PHILIPS_TIGER: - configure_tda827x_fe(dev, &philips_tiger_config, &tda827x_cfg_0); + if (configure_tda827x_fe(dev, &philips_tiger_config, + &tda827x_cfg_0) < 0) + goto dettach_frontend; break; case SAA7134_BOARD_PINNACLE_PCTV_310i: - configure_tda827x_fe(dev, &pinnacle_pctv_310i_config, &tda827x_cfg_1); + if (configure_tda827x_fe(dev, &pinnacle_pctv_310i_config, + &tda827x_cfg_1) < 0) + goto dettach_frontend; break; case SAA7134_BOARD_HAUPPAUGE_HVR1110: - configure_tda827x_fe(dev, &hauppauge_hvr_1110_config, &tda827x_cfg_1); + if (configure_tda827x_fe(dev, &hauppauge_hvr_1110_config, + &tda827x_cfg_1) < 0) + goto dettach_frontend; break; case SAA7134_BOARD_ASUSTeK_P7131_DUAL: - configure_tda827x_fe(dev, &asus_p7131_dual_config, &tda827x_cfg_0); + if (configure_tda827x_fe(dev, &asus_p7131_dual_config, + &tda827x_cfg_0) < 0) + goto dettach_frontend; break; case SAA7134_BOARD_FLYDVBT_LR301: - configure_tda827x_fe(dev, &tda827x_lifeview_config, &tda827x_cfg_0); + if (configure_tda827x_fe(dev, &tda827x_lifeview_config, + &tda827x_cfg_0) < 0) + goto dettach_frontend; break; case SAA7134_BOARD_FLYDVB_TRIO: - if(! use_frontend) { /* terrestrial */ - configure_tda827x_fe(dev, &lifeview_trio_config, &tda827x_cfg_0); + if (!use_frontend) { /* terrestrial */ + if (configure_tda827x_fe(dev, &lifeview_trio_config, + &tda827x_cfg_0) < 0) + goto dettach_frontend; } else { /* satellite */ dev->dvb.frontend = dvb_attach(tda10086_attach, &flydvbs, &dev->i2c_adap); if (dev->dvb.frontend) { if (dvb_attach(tda826x_attach, dev->dvb.frontend, 0x63, &dev->i2c_adap, 0) == NULL) { wprintk("%s: Lifeview Trio, No tda826x found!\n", __func__); + goto dettach_frontend; } if (dvb_attach(isl6421_attach, dev->dvb.frontend, &dev->i2c_adap, 0x08, 0, 0) == NULL) { wprintk("%s: Lifeview Trio, No ISL6421 found!\n", __func__); + goto dettach_frontend; } } } @@ -1070,15 +1092,20 @@ &ads_duo_cfg) == NULL) { wprintk("no tda827x tuner found at addr: %02x\n", ads_tech_duo_config.tuner_address); + goto dettach_frontend; } } break; case SAA7134_BOARD_TEVION_DVBT_220RF: - configure_tda827x_fe(dev, &tevion_dvbt220rf_config, &tda827x_cfg_0); + if (configure_tda827x_fe(dev, &tevion_dvbt220rf_config, + &tda827x_cfg_0) < 0) + goto dettach_frontend; break; case SAA7134_BOARD_MEDION_MD8800_QUADRO: if (!use_frontend) { /* terrestrial */ - configure_tda827x_fe(dev, &md8800_dvbt_config, &tda827x_cfg_0); + if (configure_tda827x_fe(dev, &md8800_dvbt_config, + &tda827x_cfg_0) < 0) + goto dettach_frontend; } else { /* satellite */ dev->dvb.frontend = dvb_attach(tda10086_attach, &flydvbs, &dev->i2c_adap); @@ -1089,16 +1116,20 @@ struct i2c_msg msg = {.addr = 0x08, .flags = 0, .len = 1}; if (dvb_attach(tda826x_attach, dev->dvb.frontend, - 0x60, &dev->i2c_adap, 0) == NULL) + 0x60, &dev->i2c_adap, 0) == NULL) { wprintk("%s: Medion Quadro, no tda826x " "found !\n", __func__); + goto dettach_frontend; + } if (dev_id != 0x08) { /* we need to open the i2c gate (we know it exists) */ fe->ops.i2c_gate_ctrl(fe, 1); if (dvb_attach(isl6405_attach, fe, - &dev->i2c_adap, 0x08, 0, 0) == NULL) + &dev->i2c_adap, 0x08, 0, 0) == NULL) { wprintk("%s: Medion Quadro, no ISL6405 " "found !\n", __func__); + goto dettach_frontend; + } if (dev_id == 0x07) { /* fire up the 2nd section of the LNB supply since we can't do this from the other section */ @@ -1120,19 +1151,17 @@ case SAA7134_BOARD_AVERMEDIA_AVERTVHD_A180: dev->dvb.frontend = dvb_attach(nxt200x_attach, &avertvhda180, &dev->i2c_adap); - if (dev->dvb.frontend) { + if (dev->dvb.frontend) dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x61, NULL, DVB_PLL_TDHU2); - } break; case SAA7134_BOARD_KWORLD_ATSC110: dev->dvb.frontend = dvb_attach(nxt200x_attach, &kworldatsc110, &dev->i2c_adap); - if (dev->dvb.frontend) { + if (dev->dvb.frontend) dvb_attach(simple_tuner_attach, dev->dvb.frontend, &dev->i2c_adap, 0x61, TUNER_PHILIPS_TUV1236D); - } break; case SAA7134_BOARD_FLYDVBS_LR300: dev->dvb.frontend = dvb_attach(tda10086_attach, &flydvbs, @@ -1141,10 +1170,12 @@ if (dvb_attach(tda826x_attach, dev->dvb.frontend, 0x60, &dev->i2c_adap, 0) == NULL) { wprintk("%s: No tda826x found!\n", __func__); + goto dettach_frontend; } if (dvb_attach(isl6421_attach, dev->dvb.frontend, &dev->i2c_adap, 0x08, 0, 0) == NULL) { wprintk("%s: No ISL6421 found!\n", __func__); + goto dettach_frontend; } } break; @@ -1171,43 +1202,65 @@ } break; case SAA7134_BOARD_CINERGY_HT_PCMCIA: - configure_tda827x_fe(dev, &cinergy_ht_config, &tda827x_cfg_0); + if (configure_tda827x_fe(dev, &cinergy_ht_config, + &tda827x_cfg_0) < 0) + goto dettach_frontend; break; case SAA7134_BOARD_CINERGY_HT_PCI: - configure_tda827x_fe(dev, &cinergy_ht_pci_config, &tda827x_cfg_0); + if (configure_tda827x_fe(dev, &cinergy_ht_pci_config, + &tda827x_cfg_0) < 0) + goto dettach_frontend; break; case SAA7134_BOARD_PHILIPS_TIGER_S: - configure_tda827x_fe(dev, &philips_tiger_s_config, &tda827x_cfg_2); + if (configure_tda827x_fe(dev, &philips_tiger_s_config, + &tda827x_cfg_2) < 0) + goto dettach_frontend; break; case SAA7134_BOARD_ASUS_P7131_4871: - configure_tda827x_fe(dev, &asus_p7131_4871_config, &tda827x_cfg_2); + if (configure_tda827x_fe(dev, &asus_p7131_4871_config, + &tda827x_cfg_2) < 0) + goto dettach_frontend; break; case SAA7134_BOARD_ASUSTeK_P7131_HYBRID_LNA: - configure_tda827x_fe(dev, &asus_p7131_hybrid_lna_config, &tda827x_cfg_2); + if (configure_tda827x_fe(dev, &asus_p7131_hybrid_lna_config, + &tda827x_cfg_2) < 0) + goto dettach_frontend; break; case SAA7134_BOARD_AVERMEDIA_SUPER_007: - configure_tda827x_fe(dev, &avermedia_super_007_config, &tda827x_cfg_0); + if (configure_tda827x_fe(dev, &avermedia_super_007_config, + &tda827x_cfg_0) < 0) + goto dettach_frontend; break; case SAA7134_BOARD_TWINHAN_DTV_DVB_3056: - configure_tda827x_fe(dev, &twinhan_dtv_dvb_3056_config, &tda827x_cfg_2_sw42); + if (configure_tda827x_fe(dev, &twinhan_dtv_dvb_3056_config, + &tda827x_cfg_2_sw42) < 0) + goto dettach_frontend; break; case SAA7134_BOARD_PHILIPS_SNAKE: dev->dvb.frontend = dvb_attach(tda10086_attach, &flydvbs, &dev->i2c_adap); if (dev->dvb.frontend) { if (dvb_attach(tda826x_attach, dev->dvb.frontend, 0x60, - &dev->i2c_adap, 0) == NULL) + &dev->i2c_adap, 0) == NULL) { wprintk("%s: No tda826x found!\n", __func__); + goto dettach_frontend; + } if (dvb_attach(lnbp21_attach, dev->dvb.frontend, - &dev->i2c_adap, 0, 0) == NULL) + &dev->i2c_adap, 0, 0) == NULL) { wprintk("%s: No lnbp21 found!\n", __func__); + goto dettach_frontend; + } } break; case SAA7134_BOARD_CREATIX_CTX953: - configure_tda827x_fe(dev, &md8800_dvbt_config, &tda827x_cfg_0); + if (configure_tda827x_fe(dev, &md8800_dvbt_config, + &tda827x_cfg_0) < 0) + goto dettach_frontend; break; case SAA7134_BOARD_MSI_TVANYWHERE_AD11: - configure_tda827x_fe(dev, &philips_tiger_s_config, &tda827x_cfg_2); + if (configure_tda827x_fe(dev, &philips_tiger_s_config, + &tda827x_cfg_2) < 0) + goto dettach_frontend; break; case SAA7134_BOARD_AVERMEDIA_CARDBUS_506: #if 0 @@ -1225,16 +1278,20 @@ if (dev->dvb.frontend) { struct dvb_frontend *fe; if (dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x60, - &dev->i2c_adap, DVB_PLL_PHILIPS_SD1878_TDA8261) == NULL) + &dev->i2c_adap, DVB_PLL_PHILIPS_SD1878_TDA8261) == NULL) { wprintk("%s: MD7134 DVB-S, no SD1878 " "found !\n", __func__); + goto dettach_frontend; + } /* we need to open the i2c gate (we know it exists) */ fe = dev->dvb.frontend; fe->ops.i2c_gate_ctrl(fe, 1); if (dvb_attach(isl6405_attach, fe, - &dev->i2c_adap, 0x08, 0, 0) == NULL) + &dev->i2c_adap, 0x08, 0, 0) == NULL) { wprintk("%s: MD7134 DVB-S, no ISL6405 " "found !\n", __func__); + goto dettach_frontend; + } fe->ops.i2c_gate_ctrl(fe, 0); dev->original_set_voltage = fe->ops.set_voltage; fe->ops.set_voltage = md8800_set_voltage; @@ -1261,10 +1318,7 @@ if (!fe) { printk(KERN_ERR "%s/2: xc3028 attach failed\n", dev->name); - dvb_frontend_detach(dev->dvb.frontend); - dvb_unregister_frontend(dev->dvb.frontend); - dev->dvb.frontend = NULL; - return -1; + goto dettach_frontend; } } @@ -1289,6 +1343,13 @@ dev->dvb.frontend->ops.tuner_ops.sleep(dev->dvb.frontend); } return ret; + +dettach_frontend: + dvb_frontend_detach(dev->dvb.frontend); + dvb_unregister_frontend(dev->dvb.frontend); + dev->dvb.frontend = NULL; + + return -1; } static int dvb_fini(struct saa7134_dev *dev) diff -r 341e0cd5c1a4 linux/drivers/media/video/tuner-core.c --- a/linux/drivers/media/video/tuner-core.c Wed Apr 30 11:40:17 2008 +0000 +++ b/linux/drivers/media/video/tuner-core.c Wed Apr 30 12:16:38 2008 -0300 @@ -369,16 +369,6 @@ tuner_warn("====================== WARNING! ======================\n"); } -static void attach_tda829x(struct tuner *t) -{ - struct tda829x_config cfg = { - .lna_cfg = t->config, - .tuner_callback = t->tuner_callback, - }; - dvb_attach(tda829x_attach, - &t->fe, t->i2c->adapter, t->i2c->addr, &cfg); -} - static struct xc5000_config xc5000_cfg; static void set_type(struct i2c_client *c, unsigned int type, @@ -414,12 +404,19 @@ switch (t->type) { case TUNER_MT2032: - dvb_attach(microtune_attach, - &t->fe, t->i2c->adapter, t->i2c->addr); + if (!dvb_attach(microtune_attach, + &t->fe, t->i2c->adapter, t->i2c->addr)) + goto attach_failed; break; case TUNER_PHILIPS_TDA8290: { - attach_tda829x(t); + struct tda829x_config cfg = { + .lna_cfg = t->config, + .tuner_callback = t->tuner_callback, + }; + if (!dvb_attach(tda829x_attach, &t->fe, t->i2c->adapter, + t->i2c->addr, &cfg)) + goto attach_failed; break; } case TUNER_TEA5767: @@ -470,8 +467,9 @@ break; } case TUNER_TDA9887: - dvb_attach(tda9887_attach, - &t->fe, t->i2c->adapter, t->i2c->addr); + if (!dvb_attach(tda9887_attach, + &t->fe, t->i2c->adapter, t->i2c->addr)) + goto attach_failed; break; case TUNER_XC5000: { --
