> * Ralf Hildebrandt <Ralf.Hildebrandt@charite.de>:
>
> > Well, something seems to work:
> >
> > [ 3.571216] Fusion MPT base driver 3.04.06
> > [ 3.571274] Copyright (c) 1999-2007 LSI Corporation
> > [ 3.577292] Fusion MPT SPI Host driver 3.04.06
> > [ 3.577389] ACPI: PCI Interrupt 0000:14:04.0[A] -> GSI
> 17 (level, low) -> IRQ 17
> > [ 3.577512] mptbase: ioc0: Initiating bringup
> > [ 3.836271] ioc0: LSI53C1030 C0: Capabilities={Initiator,Target}
> > [ 3.992277] scsi0 : ioc0: LSI53C1030 C0,
> FwRev=01032700h, Ports=1, MaxQ=255, IRQ=17
> > [ 3.992277] ACPI: PCI Interrupt 0000:14:04.1[B] -> GSI
> 18 (level, low) -> IRQ 18
> > [ 3.992277] mptbase: ioc1: Initiating bringup
> > [ 4.244297] ioc1: LSI53C1030 C0: Capabilities={Initiator,Target}
> > [ 4.408304] scsi1 : ioc1: LSI53C1030 C0,
> FwRev=01032700h, Ports=1, MaxQ=255, IRQ=18
> >
> > # lspci -v -s 14:04.0
> > 14:04.0 SCSI storage controller: Atto Technology Ultra320
> SCSI Host Adapter (rev 08)
> > Subsystem: Atto Technology Unknown device 802f
> > Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 17
> > I/O ports at 5000 [size=256]
> > Memory at fdfc0000 (64-bit, non-prefetchable) [size=256K]
> > Memory at fdf80000 (64-bit, non-prefetchable) [size=256K]
> > Capabilities: [50] Power Management version 2
> > Capabilities: [58] Message Signalled Interrupts:
> Mask- 64bit+ Queue=0/0 Enable-
> > Capabilities: [68] PCI-X non-bridge device
> > Kernel driver in use: mptspi
> > Kernel modules: mptspi
>
> According to
http://lwn.net/Articles/254394, Eric Moore added the ATTO
> 4LD support:
>
> mpt fusion: Add support for ATTO 4LD: Rebranded LSI
>
> And the HP U320e SCSI Bus Adapter seesm to be a rebranded ATTO 4LD.
> But I cannot be sure.
>
