Thecus N2100 has leds and a buzzer attached to a pca9532
controller. Attach the driver to the i2c bus and define
the pca9532 pin coniguration for this platform in n2100_leds.
With this patch, support for N2100 should be complete in mainline
Linux.
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
---
arch/arm/mach-iop32x/n2100.c | 52 ++++++++++++++++++++++++++++++++++++++++++
1 files changed, 52 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-iop32x/n2100.c b/arch/arm/mach-iop32x/n2100.c
index bc91d6e..029d234 100644
--- a/arch/arm/mach-iop32x/n2100.c
+++ b/arch/arm/mach-iop32x/n2100.c
@@ -17,6 +17,7 @@
#include <linux/mm.h>
#include <linux/init.h>
#include <linux/f75375s.h>
+#include <linux/leds-pca9532.h>
#include <linux/delay.h>
#include <linux/kernel.h>
#include <linux/pci.h>
@@ -206,6 +207,53 @@ static struct f75375s_platform_data n2100_f75375s = {
.pwm_enable = { 0, 0 },
};
+static struct pca9532_platform_data n2100_leds = {
+ .leds = {
+ { .name = "n2100:red:satafail0",
+ .state = PCA9532_OFF,
+ .type = PCA9532_TYPE_LED,
+ },
+ { .name = "n2100:red:satafail1",
+ .state = PCA9532_OFF,
+ .type = PCA9532_TYPE_LED,
+ },
+ { .name = "n2100:blue:usb",
+ .state = PCA9532_OFF,
+ .type = PCA9532_TYPE_LED,
+ },
+ { .type = PCA9532_TYPE_NONE },
+
+ { .type = PCA9532_TYPE_NONE },
+ { .type = PCA9532_TYPE_NONE },
+ { .type = PCA9532_TYPE_NONE },
+ { .name = "n2100:red:usb",
+ .state = PCA9532_OFF,
+ .type = PCA9532_TYPE_LED,
+ },
+
+ { .type = PCA9532_TYPE_NONE }, /* power OFF gpio */
+ { .type = PCA9532_TYPE_NONE }, /* reset gpio */
+ { .type = PCA9532_TYPE_NONE },
+ { .type = PCA9532_TYPE_NONE },
+
+ { .type = PCA9532_TYPE_NONE },
+ { .name = "n2100:orange:system",
+ .state = PCA9532_OFF,
+ .type = PCA9532_TYPE_LED,
+ },
+ { .name = "n2100:red:system",
+ .state = PCA9532_OFF,
+ .type = PCA9532_TYPE_LED,
+ },
+ { .name = "N2100 beeper" ,
+ .state = PCA9532_OFF,
+ .type = PCA9532_TYPE_N2100_BEEP,
+ },
+ },
+ .psc = { 0, 0 },
+ .pwm = { 0, 0 },
+};
+
static struct i2c_board_info __initdata n2100_i2c_devices[] = {
{
I2C_BOARD_INFO("rtc-rs5c372", 0x32),
@@ -216,6 +264,10 @@ static struct i2c_board_info __initdata n2100_i2c_devices[] = {
.type = "f75375",
.platform_data = &n2100_f75375s,
},
+ {
+ I2C_BOARD_INFO("pca9532", 0x60),
+ .platform_data = &n2100_leds,
+ },
};
/*
--
1.5.4.5
--
"rm -rf" only sounds scary if you don't have backups
--
