On Tue, 4 Mar 2008 09:14:53 -0800 (PST)
rafa400@losgandia.com wrote:

quoted text
> [1.] new NUDAM (USB-485) converter not recogniced by pl2303. Little change
> required.
> [2.] Until now NUDAM USB to RS-485/422 RS232 converter was detected by USB
> system and pl2303 module working fine in my Debian as /dev/ttyUSB0
> 
> # dmesg
> ....
> usb 5-1.3: new full speed USB device using ehci_hcd and address 17
> usb 5-1.3: configuration #1 chosen from 1 choice
> pl2303 5-1.3:1.0: pl2303 converter detected
> usb 5-1.3: pl2303 converter now attached to ttyUSB0
> 
> # lsusb
> Bus 005 Device 017: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial Port
> 
>  They changed USB ID and now its like:
> 
> # lsusb
> Bus 005 Device 016: ID 0b63:6530 ADLink Technology, Inc.
> 
> but this ID is not detected by PD2303 module.
> a little change in pl2303 solve the problem
> 
> [3.] pl2303 NUDAM USB 485
> [4.] Linux version 2.6.24-nudam (2.6.24-4) (root@rp022) (gcc version 4.2.3
> 20080114 (prerelease) (Debian 4.2.2-7)) #1 SMP Mon Mar 3 12:02:41 CET 2008
> [5.] not required
> [6.] not required
> [7.] not required
> [X.] Other notes, patches, fixes, workarounds:
> I made the tribial changes in:
> 
> drivers/usb/serial/pl2303.c
> drivers/usb/serial/pl2303.h
> 
> adding de new USB ID 0b63:6530 to the existing arrays as needed
> recompile kernel, etc,etc.
> and it works fine again.
> 
> Please include this in newer versions if it is possible.

Please just send us the patch.
--
unsubscribe notice
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/