This reverts commit b140b99c413ce410197cfcd4014e757cd745226a.
[ conflict in drivers/ide/ide-probe.c fixed manually ]
It turned out that probing order change causes problems for some drives:
http://bugzilla.kernel.org/show_bug.cgi?id=10239
Since root causes are still being investigated and are unlikely to be fixed
before 2.6.25 lets revert this change for now. As a result cable detection
becomes less reliable when compared with 2.6.24 but the affected drives are
useable again.
Reported-by: Richard Genoud <richard.genoud@gmail.com>
Bisected-by: Richard Genoud <richard.genoud@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
drivers/ide/ide-iops.c | 1 +
drivers/ide/ide-probe.c | 5 +++--
2 files changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c
index c419266..01b9220 100644
--- a/drivers/ide/ide-iops.c
+++ b/drivers/ide/ide-iops.c
@@ -595,6 +595,7 @@ u8 eighty_ninty_three (ide_drive_t *drive)
/*
* FIXME:
+ * - change master/slave IDENTIFY order
* - force bit13 (80c cable present) check also for !ivb devices
* (unless the slave device is pre-ATA3)
*/
diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index 194ecb0..47a1149 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -774,9 +774,10 @@ static int ide_probe_port(ide_hwif_t *hwif)
printk(KERN_DEBUG "%s: Wait for ready failed before probe !\n", hwif->name);
/*
- * Need to probe slave device first to make it release PDIAG-.
+ * Second drive should only exist if first drive was found,
+ * but a lot of cdrom drives are configured as single slaves.
*/
- for (unit = MAX_DRIVES - 1; unit >= 0; unit--) {
+ for (unit = 0; unit < MAX_DRIVES; ++unit) {
ide_drive_t *drive = &hwif->drives[unit];
drive->dn = (hwif->channel ? 2 : 0) + unit;
(void) probe_for_drive(drive);
--
