Hi
Since early 2.6.25 days I'm having strange lockup on boot. As it happens
rarely (in ~10% of boots), I couldn't bisect it. No kernel panic, SysRq
didn't work, so I couldn't provide any useful informations to LK community.
I hoped someone else would fix it... :)

It's rc3 so I decided to narrow it down myself. I enabled netconsole 
to see whether some other informations are printed before lockup.
It didn't help, but I noticed that lockup happens much more frequenly! (~50%)
So I bisected it down to:

8f4d37ec073c17e2d4aa8851df5837d798606d6f is first bad commit
commit 8f4d37ec073c17e2d4aa8851df5837d798606d6f
Author: Peter Zijlstra <a.p.zijlstra@chello.nl>
Date:   Fri Jan 25 21:08:29 2008 +0100

    sched: high-res preemption tick

    Use HR-timers (when available) to deliver an accurate preemption tick.

    The regular scheduler tick that runs at 1/HZ can be too coarse when nice
    level are used. The fairness system will still keep the cpu utilisation 'fair'
    by then delaying the task that got an excessive amount of CPU time but try to
    minimize this by delivering preemption points spot-on.

    The average frequency of this extra interrupt is sched_latency / nr_latency.
    Which need not be higher than 1/HZ, its just that the distribution within the
    sched_latency period is important.

    Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
    Signed-off-by: Ingo Molnar <mingo@elte.hu>

:040000 040000 ab225228500f7a19d5ad20ca12ca3fc8ff5f5ad1 f1742e1d225a72aecea9d6961ed989b5943d31d8 M      arch
:040000 040000 25d85e4ef7a71b0cc76801a2526ebeb4dce180fe ae61510186b4fad708ef0211ac169decba16d4e5 M      include
:040000 040000 9247cec7dd506c648ac027c17e5a07145aa41b26 950832cc1dc4d30923f593ecec883a06b45d62e9 M      kernel

I can't revert it on top of rc3 because of conflicts.

Usually my boot looks like this (it's Gentoo with RC_PARALLEL_STARTUP="yes"):
INIT: Entering runlevel: 3
 * Service net.eth0 starting
 * Service metalog starting
 * Service net.eth1 starting
 * Service acpid starting
 * Service netmount starting
 * Service xdm starting
 * Service cpudyn starting
 * Service rdate starting
 * Service vixie-cron starting
 * Service local starting
 * Service cpudyn started
 * Service metalog started
 * Service acpid started
 * Service net.eth0 started
--------------------------------------- lockup usually here, but sometimes later 
 * Service net.eth1 started
 * Service netmount started
 * Service rdate started
 * Service vixie-cron started
 * Service xdm started
 * Service local started

Successful boot:
[    0.000000] Linux version 2.6.25-rc3 (marcin@joi) (gcc version 4.1.2 (Gentoo 4.1.2 p1.0.2)) #171 PREEMPT Sun Mar 2 18:42:13 CET 2008
[    0.000000] Command line: root=/dev/sda5 video=vesafb vga=794 
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000003ffb0000 (usable)
[    0.000000]  BIOS-e820: 000000003ffb0000 - 000000003ffc0000 (ACPI data)
[    0.000000]  BIOS-e820: 000000003ffc0000 - 000000003fff0000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
[    0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used
[    0.000000] Entering add_active_range(0, 256, 262064) 1 entries of 256 used
[    0.000000] end_pfn_map = 1048576
[    0.000000] DMI 2.3 present.
[    0.000000] ACPI: RSDP 000FA810, 0021 (r2 ACPIAM)
[    0.000000] ACPI: XSDT 3FFB0100, 003C (r1 A M I  OEMXSDT  10000427 MSFT       97)
[    0.000000] ACPI: FACP 3FFB0290, 00F4 (r3 A M I  OEMFACP  10000427 MSFT       97)
[    0.000000] ACPI: DSDT 3FFB03E0, 38A1 (r1  A0036 A0036001        1 MSFT  100000D)
[    0.000000] ACPI: FACS 3FFC0000, 0040
[    0.000000] ACPI: APIC 3FFB0390, 004A (r1 A M I  OEMAPIC  10000427 MSFT       97)
[    0.000000] ACPI: OEMB 3FFC0040, 003F (r1 A M I  OEMBIOS  10000427 MSFT       97)
[    0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used
[    0.000000] Entering add_active_range(0, 256, 262064) 1 entries of 256 used
[    0.000000] early res: 0 [0-fff] BIOS data page
[    0.000000] early res: 1 [200000-acf487] TEXT DATA BSS
[    0.000000] early res: 2 [9fc00-a0bff] EBDA
[    0.000000] early res: 3 [8000-afff] PGTABLE
[    0.000000]  [ffffe20000000000-ffffe200001fffff] PMD ->ffff810001200000 on node 0
[    0.000000]  [ffffe20000200000-ffffe200003fffff] PMD ->ffff810001600000 on node 0
[    0.000000]  [ffffe20000400000-ffffe200005fffff] PMD ->ffff810001a00000 on node 0
[    0.000000]  [ffffe20000600000-ffffe200007fffff] PMD ->ffff810001e00000 on node 0
[    0.000000]  [ffffe20000800000-ffffe200009fffff] PMD ->ffff810002200000 on node 0
[    0.000000]  [ffffe20000a00000-ffffe20000bfffff] PMD ->ffff810002600000 on node 0
[    0.000000]  [ffffe20000c00000-ffffe20000dfffff] PMD ->ffff810002a00000 on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   DMA32        4096 ->  1048576
[    0.000000]   Normal    1048576 ->  1048576
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0:        0 ->      159
[    0.000000]     0:      256 ->   262064
[    0.000000] On node 0 totalpages: 261967
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 2262 pages reserved
[    0.000000]   DMA zone: 1681 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 3526 pages used for memmap
[    0.000000]   DMA32 zone: 254442 pages, LIFO batch:31
[    0.000000]   Normal zone: 0 pages used for memmap
[    0.000000]   Movable zone: 0 pages used for memmap
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] Processor #0 (Bootup-CPU)
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Setting APIC routing to flat
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bf780000)
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 256123
[    0.000000] Kernel command line: root=/dev/sda5 video=vesafb vga=794 
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[    0.000000] Extended CMOS year: 2000
[    0.000000] TSC calibrated against PM_TIMER
[    0.000001] time.c: Detected 2002.556 MHz processor.
[    0.000031] Console: colour dummy device 80x25
[    0.000038] console [tty0] enabled
[    0.000639] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[    0.000648] ... MAX_LOCKDEP_SUBCLASSES:    8
[    0.000653] ... MAX_LOCK_DEPTH:          48
[    0.000657] ... MAX_LOCKDEP_KEYS:        2048
[    0.000662] ... CLASSHASH_SIZE:           1024
[    0.000667] ... MAX_LOCKDEP_ENTRIES:     8192
[    0.000672] ... MAX_LOCKDEP_CHAINS:      16384
[    0.000677] ... CHAINHASH_SIZE:          8192
[    0.000682]  memory used by lock dependency info: 1648 kB
[    0.000688]  per task-struct memory footprint: 2688 bytes
[    0.000693] ------------------------
[    0.000698] | Locking API testsuite:
[    0.000702] ----------------------------------------------------------------------------
[    0.000710]                                  | spin |wlock |rlock |mutex | wsem | rsem |
[    0.000719]   --------------------------------------------------------------------------
[    0.000731]                      A-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.000999]                  A-B-B-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.000999]              A-B-B-C-C-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.000999]              A-B-C-A-B-C deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.000999]          A-B-B-C-C-D-D-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.000999]          A-B-C-D-B-D-D-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.000999]          A-B-C-D-B-C-D-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.000999]                     double unlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.000999]                   initialize held:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.000999]                  bad unlock order:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.000999]   --------------------------------------------------------------------------
[    0.000999]               recursive read-lock:             |  ok  |             |  ok  |
[    0.000999]            recursive read-lock #2:             |  ok  |             |  ok  |
[    0.000999]             mixed read-write-lock:             |  ok  |             |  ok  |
[    0.000999]             mixed write-read-lock:             |  ok  |             |  ok  |
[    0.000999]   --------------------------------------------------------------------------
[    0.000999]      hard-irqs-on + irq-safe-A/12:  ok  |  ok  |  ok  |
[    0.000999]      soft-irqs-on + irq-safe-A/12:  ok  |  ok  |  ok  |
[    0.000999]      hard-irqs-on + irq-safe-A/21:  ok  |  ok  |  ok  |
[    0.000999]      soft-irqs-on + irq-safe-A/21:  ok  |  ok  |  ok  |
[    0.000999]        sirq-safe-A => hirqs-on/12:  ok  |  ok  |  ok  |
[    0.000999]        sirq-safe-A => hirqs-on/21:  ok  |  ok  |  ok  |
[    0.000999]          hard-safe-A + irqs-on/12:  ok  |  ok  |  ok  |
[    0.000999]          soft-safe-A + irqs-on/12:  ok  |  ok  |  ok  |
[    0.000999]          hard-safe-A + irqs-on/21:  ok  |  ok  |  ok  |
[    0.000999]          soft-safe-A + irqs-on/21:  ok  |  ok  |  ok  |
[    0.000999]     hard-safe-A + unsafe-B #1/123:  ok  |  ok  |  ok  |
[    0.000999]     soft-safe-A + unsafe-B #1/123:  ok  |  ok  |  ok  |
[    0.000999]     hard-safe-A + unsafe-B #1/132:  ok  |  ok  |  ok  |
[    0.000999]     soft-safe-A + unsafe-B #1/132:  ok  |  ok  |  ok  |
[    0.000999]     hard-safe-A + unsafe-B #1/213:  ok  |  ok  |  ok  |
[    0.000999]     soft-safe-A + unsafe-B #1/213:  ok  |  ok  |  ok  |
[    0.000999]     hard-safe-A + unsafe-B #1/231:  ok  |  ok  |  ok  |
[    0.000999]     soft-safe-A + unsafe-B #1/231:  ok  |  ok  |  ok  |
[    0.000999]     hard-safe-A + unsafe-B #1/312:  ok  |  ok  |  ok  |
[    0.000999]     soft-safe-A + unsafe-B #1/312:  ok  |  ok  |  ok  |
[    0.000999]     hard-safe-A + unsafe-B #1/321:  ok  |  ok  |  ok  |
[    0.000999]     soft-safe-A + unsafe-B #1/321:  ok  |  ok  |  ok  |
[    0.000999]     hard-safe-A + unsafe-B #2/123:  ok  |  ok  |  ok  |
[    0.000999]     soft-safe-A + unsafe-B #2/123:  ok  |  ok  |  ok  |
[    0.000999]     hard-safe-A + unsafe-B #2/132:  ok  |  ok  |  ok  |
[    0.000999]     soft-safe-A + unsafe-B #2/132:  ok  |  ok  |  ok  |
[    0.000999]     hard-safe-A + unsafe-B #2/213:  ok  |  ok  |  ok  |
[    0.000999]     soft-safe-A + unsafe-B #2/213:  ok  |  ok  |  ok  |
[    0.000999]     hard-safe-A + unsafe-B #2/231:  ok  |  ok  |  ok  |
[    0.000999]     soft-safe-A + unsafe-B #2/231:  ok  |  ok  |  ok  |
[    0.000999]     hard-safe-A + unsafe-B #2/312:  ok  |  ok  |  ok  |
[    0.000999]     soft-safe-A + unsafe-B #2/312:  ok  |  ok  |  ok  |
[    0.000999]     hard-safe-A + unsafe-B #2/321:  ok  |  ok  |  ok  |
[    0.000999]     soft-safe-A + unsafe-B #2/321:  ok  |  ok  |  ok  |
[    0.000999]       hard-irq lock-inversion/123:  ok  |  ok  |  ok  |
[    0.000999]       soft-irq lock-inversion/123:  ok  |  ok  |  ok  |
[    0.000999]       hard-irq lock-inversion/132:  ok  |  ok  |  ok  |
[    0.000999]       soft-irq lock-inversion/132:  ok  |  ok  |  ok  |
[    0.000999]       hard-irq lock-inversion/213:  ok  |  ok  |  ok  |
[    0.000999]       soft-irq lock-inversion/213:  ok  |  ok  |  ok  |
[    0.000999]       hard-irq lock-inversion/231:  ok  |  ok  |  ok  |
[    0.000999]       soft-irq lock-inversion/231:  ok  |  ok  |  ok  |
[    0.000999]       hard-irq lock-inversion/312:  ok  |  ok  |  ok  |
[    0.000999]       soft-irq lock-inversion/312:  ok  |  ok  |  ok  |
[    0.000999]       hard-irq lock-inversion/321:  ok  |  ok  |  ok  |
[    0.000999]       soft-irq lock-inversion/321:  ok  |  ok  |  ok  |
[    0.000999]       hard-irq read-recursion/123:  ok  |
[    0.000999]       soft-irq read-recursion/123:  ok  |
[    0.000999]       hard-irq read-recursion/132:  ok  |
[    0.000999]       soft-irq read-recursion/132:  ok  |
[    0.000999]       hard-irq read-recursion/213:  ok  |
[    0.000999]       soft-irq read-recursion/213:  ok  |
[    0.000999]       hard-irq read-recursion/231:  ok  |
[    0.000999]       soft-irq read-recursion/231:  ok  |
[    0.000999]       hard-irq read-recursion/312:  ok  |
[    0.000999]       soft-irq read-recursion/312:  ok  |
[    0.000999]       hard-irq read-recursion/321:  ok  |
[    0.000999]       soft-irq read-recursion/321:  ok  |
[    0.000999] -------------------------------------------------------
[    0.000999] Good, all 218 testcases passed! |
[    0.000999] ---------------------------------
[    0.000999] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.000999] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.000999] Checking aperture...
[    0.000999] Node 0: aperture @ e8000000 size 64 MB
[    0.000999] Memory: 1022064k/1048256k available (2930k kernel code, 25080k reserved, 1545k data, 240k init)
[    0.000999] CPA: page pool initialized 1 of 1 pages preallocated
[    0.060995] Calibrating delay using timer specific routine.. 4009.08 BogoMIPS (lpj=2004544)
[    0.061088] Mount-cache hash table entries: 256
[    0.061649] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[    0.061657] CPU: L2 Cache: 512K (64 bytes/line)
[    0.061668] CPU: AMD Athlon(tm) 64 Processor 3200+ stepping 00
[    0.061688] ACPI: Core revision 20070126
[    0.067298] Parsing all Control Methods:
[    0.067376] Table [DSDT](id 0001) - 543 Objects with 51 Devices 146 Methods 25 Regions
[    0.067388]  tbxface-0598 [00] tb_load_namespace     : ACPI Tables successfully acquired
[    0.067995] evxfevnt-0091 [00] enable                : Transition to ACPI mode successful
[    0.078799] Using local APIC timer interrupts.
[    0.078990] APIC timer calibration result 12515969
[    0.078992] Detected 12.515 MHz APIC timer.
[    0.079522] net_namespace: 976 bytes
[    0.079853] NET: Registered protocol family 16
[    0.080319] ACPI: bus type pci registered
[    0.080507] PCI: Using configuration type 1
[    0.083051] evgpeblk-0956 [00] ev_create_gpe_block   : GPE 00 to 0F [_GPE] 2 regs on int 0x9
[    0.085346] evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 7 Wake, Enabled 0 Runtime GPEs in this block
[    0.085362] ACPI: EC: Look up EC in DSDT
[    0.088251] Completing Region/Field/Buffer/Package initialization:......................................................................................................................
[    0.091560] Initialized 21/25 Regions 44/44 Fields 41/41 Buffers 12/14 Packages (552 nodes)
[    0.091571] Initializing Device/Processor/Thermal objects by executing _INI methods:
[    0.091606] Executed 0 _INI methods requiring 0 _STA executions (examined 54 objects)
[    0.091641] ACPI: Interpreter enabled
[    0.091648] ACPI: (supports S0 S1 S3 S5)
[    0.091684] ACPI: Using IOAPIC for interrupt routing
[    0.100741] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.102022] pci 0000:00:11.0: Enabled onboard AC97/MC97 devices
[    0.102399] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.115868] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 14 15)
[    0.116032] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 14 15)
[    0.116169] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 14 15)
[    0.116304] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[    0.116443] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[    0.116582] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[    0.116720] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[    0.116871] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[    0.117109] Linux Plug and Play Support v0.97 (c) Adam Belay
[    0.117169] pnp: PnP ACPI init
[    0.117197] ACPI: bus type pnp registered
[    0.121235] pnp: PnP ACPI: found 10 devices
[    0.121245] ACPI: ACPI bus type pnp unregistered
[    0.121556] SCSI subsystem initialized
[    0.121618] libata version 3.00 loaded.
[    0.122127] PCI: Using ACPI for IRQ routing
[    0.122135] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[    0.122153] PCI: Cannot allocate resource region 0 of device 0000:00:00.0
[    0.126010] DMAR:parse DMAR table failure.
[    0.126010] agpgart: Detected AGP bridge 0
[    0.128281] agpgart: AGP aperture is 64M @ 0xe8000000
[    0.128503] ACPI: RTC can wake from S4
[    0.129008] Time: tsc clocksource has been installed.
[    0.132036] system 00:06: ioport range 0x680-0x6ff has been reserved
[    0.132036] system 00:06: ioport range 0x290-0x297 has been reserved
[    0.132036] system 00:07: ioport range 0x3e1-0x3e7 has been reserved
[    0.132036] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
[    0.132036] system 00:07: ioport range 0x800-0x87f has been reserved
[    0.132036] system 00:07: ioport range 0x400-0x41f has been reserved
[    0.132036] system 00:08: iomem range 0xfec00000-0xfec00fff has been reserved
[    0.132036] system 00:08: iomem range 0xfee00000-0xfee00fff could not be reserved
[    0.132036] system 00:08: iomem range 0xfff80000-0xffffffff could not be reserved
[    0.132036] system 00:09: iomem range 0x0-0x9ffff could not be reserved
[    0.132036] system 00:09: iomem range 0xc0000-0xdffff has been reserved
[    0.132036] system 00:09: iomem range 0xe0000-0xfffff could not be reserved
[    0.132036] system 00:09: iomem range 0x100000-0x3ffeffff could not be reserved
[    0.132036] system 00:09: iomem range 0x0-0x0 could not be reserved
[    0.132182] PCI: Bridge: 0000:00:01.0
[    0.132189]   IO window: disabled.
[    0.132197]   MEM window: 0xfaf00000-0xfbffffff
[    0.132205]   PREFETCH window: 0x00000000f0000000-0x00000000f9ffffff
[    0.132236] PCI: Setting latency timer of device 0000:00:01.0 to 64
[    0.132270] NET: Registered protocol family 2
[    0.143710] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.143710] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
[    0.144973] TCP bind hash table entries: 65536 (order: 9, 3670016 bytes)
[    0.150039] TCP: Hash tables configured (established 131072 bind 65536)
[    0.150078] TCP reno registered
[    0.154988] Initializing RT-Tester: OK
[    0.155179] Total HugeTLB memory allocated, 0
[    0.156010] io scheduler noop registered
[    0.156029] io scheduler cfq registered (default)
[    0.156047] PCI: VIA PCI bridge detected. Disabling DAC.
[    0.156169] pci 0000:01:00.0: Boot video device
[    0.156403] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[    0.292389] nvidiafb: Device ID: 10de0322 
[    0.297698] nvidiafb: CRTC0 analog found
[    0.301699] nvidiafb: CRTC1 analog not found
[    0.515676] nvidiafb: EDID found from BUS1
[    0.591462] i2c-adapter i2c-1: unable to read EDID block.
[    0.633682] Switched to high resolution mode on CPU 0
[    0.710499] i2c-adapter i2c-1: unable to read EDID block.
[    0.828668] i2c-adapter i2c-1: unable to read EDID block.
[    0.871092] nvidiafb: CRTC 0 appears to have a CRT attached
[    0.871092] nvidiafb: Using CRT on CRTC 0
[    3.031305] nvidiafb: MTRR set to ON
[    3.096487] Console: switching to colour frame buffer device 160x64
[    3.101003] nvidiafb: PCI nVidia NV32 framebuffer (64MB @ 0xF0000000)
[    3.101354] input: Power Button (FF) as /devices/virtual/input/input0
[    3.101428] ACPI: Power Button (FF) [PWRF]
[    3.101587] input: Power Button (CM) as /devices/virtual/input/input1
[    3.101637] ACPI: Power Button (CM) [PWRB]
[    3.101790] input: Sleep Button (CM) as /devices/virtual/input/input2
[    3.101838] ACPI: Sleep Button (CM) [SLPB]
[    3.102463] ACPI: ACPI0007:00 is registered as cooling_device0
[    3.159531] Real Time Clock Driver v1.12ac
[    3.159740] Linux agpgart interface v0.103
[    3.161103] brd: module loaded
[    3.161800] loop: module loaded
[    3.161854] ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker
[    3.161911] ACPI: PCI Interrupt 0000:00:0c.0[A] -> GSI 17 (level, low) -> IRQ 17
[    3.162536] eth0: Compex RL2000 found at 0xb000, IRQ 17, 00:80:48:de:5e:89.
[    3.162692] ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 17 (level, low) -> IRQ 17
[    3.162760] PCI: Disallowing DAC for device 0000:00:0a.0
[    3.162847] skge 1.13 addr 0xfab00000 irq 17 chip Yukon-Lite rev 9
[    3.163427] skge eth1: addr 00:11:d8:60:74:55
[    3.163558] console [netcon0] enabled
[    3.163961] netconsole: network logging started
[    3.164852] Driver 'sd' needs updating - please use bus_type methods
[    3.165866] Driver 'sr' needs updating - please use bus_type methods
[    3.166925] sata_via 0000:00:0f.0: version 2.3
[    3.166945] ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 20
[    3.167866] sata_via 0000:00:0f.0: routed to hard irq line 10
[    3.168943] scsi0 : sata_via
[    3.169955] scsi1 : sata_via
[    3.170910] ata1: SATA max UDMA/133 cmd 0xd000 ctl 0xc800 bmdma 0xb800 irq 20
[    3.171813] ata2: SATA max UDMA/133 cmd 0xc400 ctl 0xc000 bmdma 0xb808 irq 20
[    3.375761] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    3.530909] ata1.00: ATA-6: WDC WD1600JD-00HBB0, 08.02D08, max UDMA/133
[    3.530912] ata1.00: 312581808 sectors, multi 16: LBA48 
[    3.539673] ata1.00: configured for UDMA/133
[    3.741335] ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[    3.753631] scsi 0:0:0:0: Direct-Access     ATA      WDC WD1600JD-00H 08.0 PQ: 0 ANSI: 5
[    3.754171] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[    3.754656] sd 0:0:0:0: [sda] Write Protect is off
[    3.755634] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.755674] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.757092] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[    3.757653] sd 0:0:0:0: [sda] Write Protect is off
[    3.758633] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.758673] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.759668]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 >
[    3.825382] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.826087] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    3.826988] pata_via 0000:00:0f.1: version 0.3.3
[    3.827031] ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 20
[    3.827977] scsi2 : pata_via
[    3.829978] scsi3 : pata_via
[    3.832725] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
[    3.832842] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
[    4.148946] PNP: PS/2 Controller [PNP0f03:PS2M] at 0x60,0x64 irq 12
[    4.148949] PNP: PS/2 controller doesn't have KBD irq; using default 1
[    4.150512] serio: i8042 KBD port at 0x60,0x64 irq 1
[    4.150976] serio: i8042 AUX port at 0x60,0x64 irq 12
[    4.153200] mice: PS/2 mouse device common for all mice
[    4.196683] rtc_cmos: probe of 00:02 failed with error -16
[    4.197935] EDAC MC: Ver: 2.1.0 Mar  2 2008
[    4.199038] oprofile: using NMI interrupt.
[    4.201309] ip_tables: (C) 2000-2006 Netfilter Core Team
[    4.201776] TCP cubic registered
[    4.202685] Initializing XFRM netlink socket
[    4.203725] NET: Registered protocol family 1
[    4.204729] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3200+ processors (1 cpu cores) (version 2.20.00)
[    4.206745] powernow-k8:    0 : fid 0xc (2000 MHz), vid 0x6
[    4.207735] powernow-k8:    1 : fid 0xa (1800 MHz), vid 0x8
[    4.208684] powernow-k8:    2 : fid 0x2 (1000 MHz), vid 0x12
[    4.209954] powernow-k8: ph2 null fid transition 0xc
[    4.211788] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    4.768444] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input3
[    4.830997] EXT3-fs: INFO: recovery required on readonly filesystem.
[    4.831000] EXT3-fs: write access will be enabled during recovery.
[    4.869692] kjournald starting.  Commit interval 5 seconds
[    4.870719] EXT3-fs: sda5: orphan cleanup on readonly fs
[    4.871689] ext3_orphan_cleanup: deleting unreferenced inode 145192
[    4.871988] EXT3-fs: sda5: 1 orphan inode deleted
[    4.872682] EXT3-fs: recovery complete.
[    4.875750] EXT3-fs: mounted filesystem with ordered data mode.
[    4.875821] VFS: Mounted root (ext3 filesystem) readonly.
[    4.876773] Freeing unused kernel memory: 240k freed
[    4.878830] Write protecting the kernel read-only data: 4164k
[    7.630829] Linux video capture interface: v2.00
[    7.655813] bttv: driver version 0.9.17 loaded
[    7.656456] bttv: using 8 buffers with 2080k (520 pages) each for capture
[    7.670234] bttv: Bt8xx card found (0).
[    7.670478] ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 18 (level, low) -> IRQ 18
[    7.673982] bttv0: Bt878 (rev 17) at 0000:00:0d.0, irq: 18, latency: 64, mmio: 0xefe00000
[    7.676098] bttv0: using: Lifeview FlyVideo 2000 /FlyVideo A2/ Lifetec LT 9415 TV [LR90] [card=54,insmod option]
[    7.676491] bttv0: gpio: en=00000000, out=00000000 in=00d4dfe0 [init]
[    7.693618] bttv0: FlyVideo Radio=yes RemoteControl=yes Tuner=5 gpio=0xd4dfe0
[    7.694447] bttv0: FlyVideo  LR90=yes tda9821/tda9820=no  capture_only=no 
[    7.700822] bttv0: tuner type=5
[    7.701451] bttv0: i2c: checking for MSP34xx @ 0x80... not found
[    7.712446] bttv0: i2c: checking for TDA9875 @ 0xb0... found
[    7.735254] tda9875: no such chip at 0xb0 (dic=0x7 rev=0x7)
[    7.735488] i2c-adapter i2c-3: Client creation failed at 0x58 (1)
[    7.740702] bttv0: i2c: checking for TDA7432 @ 0x8a... not found
[    7.901185] tuner' 3-0061: chip found @ 0xc2 (bt878 #0 [sw])
[    7.901587] tuner-simple 3-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
[    8.027138] bttv0: registered device video0
[    8.027435] bttv0: registered device vbi0
[    8.028462] bttv0: registered device radio0
[    8.029415] bttv0: PLL: 28636363 => 35468950 .. ok
[    8.108984] usbcore: registered new interface driver usbfs
[    8.109553] usbcore: registered new interface driver hub
[    8.116158] usbcore: registered new device driver usb
[    8.118374] USB Universal Host Controller Interface driver v3.0
[    8.119460] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 21
[    8.120400] uhci_hcd 0000:00:10.0: UHCI Host Controller
[    8.128338] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[    8.128425] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000d400
[    8.136403] usb usb1: configuration #1 chosen from 1 choice
[    8.138891] hub 1-0:1.0: USB hub found
[    8.143663] hub 1-0:1.0: 2 ports detected
[    8.247395] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[    8.249595] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    8.250433] usb usb1: Product: UHCI Host Controller
[    8.251412] usb usb1: Manufacturer: Linux 2.6.25-rc3 uhci_hcd
[    8.252362] usb usb1: SerialNumber: 0000:00:10.0
[    8.254400] ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 21
[    8.256361] uhci_hcd 0000:00:10.1: UHCI Host Controller
[    8.258378] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[    8.260477] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000d800
[    8.262216] usb usb2: configuration #1 chosen from 1 choice
[    8.263473] hub 2-0:1.0: USB hub found
[    8.264444] hub 2-0:1.0: 2 ports detected
[    8.366627] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    8.367405] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    8.368476] usb usb2: Product: UHCI Host Controller
[    8.369408] usb usb2: Manufacturer: Linux 2.6.25-rc3 uhci_hcd
[    8.370462] usb usb2: SerialNumber: 0000:00:10.1
[    8.371397] ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 21
[    8.372355] uhci_hcd 0000:00:10.2: UHCI Host Controller
[    8.373402] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
[    8.374369] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000e000
[    8.375554] usb usb3: configuration #1 chosen from 1 choice
[    8.376391] hub 3-0:1.0: USB hub found
[    8.378347] hub 3-0:1.0: 2 ports detected
[    8.436426] usb 1-1: new low speed USB device using uhci_hcd and address 2
[    8.479507] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    8.480331] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    8.481352] usb usb3: Product: UHCI Host Controller
[    8.482424] usb usb3: Manufacturer: Linux 2.6.25-rc3 uhci_hcd
[    8.483466] usb usb3: SerialNumber: 0000:00:10.2
[    8.484467] ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 21
[    8.487713] uhci_hcd 0000:00:10.3: UHCI Host Controller
[    8.488409] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
[    8.489354] uhci_hcd 0000:00:10.3: irq 21, io base 0x0000e400
[    8.490540] usb usb4: configuration #1 chosen from 1 choice
[    8.491567] hub 4-0:1.0: USB hub found
[    8.492400] hub 4-0:1.0: 2 ports detected
[    8.595590] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    8.596418] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    8.597371] usb usb4: Product: UHCI Host Controller
[    8.598433] usb usb4: Manufacturer: Linux 2.6.25-rc3 uhci_hcd
[    8.599394] usb usb4: SerialNumber: 0000:00:10.3
[    8.604236] ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 21
[    8.605333] ehci_hcd 0000:00:10.4: EHCI Host Controller
[    8.606494] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
[    8.607515] ehci_hcd 0000:00:10.4: irq 21, io mem 0xfae00000
[    8.614608] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[    8.615565] usb usb5: configuration #1 chosen from 1 choice
[    8.616585] hub 5-0:1.0: USB hub found
[    8.618315] hub 5-0:1.0: 8 ports detected
[    8.619328] usb 1-1: unable to read config index 0 descriptor/all
[    8.620314] usb 1-1: can't read configurations, error -71
[    8.722571] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[    8.723304] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    8.724311] usb usb5: Product: EHCI Host Controller
[    8.725321] usb usb5: Manufacturer: Linux 2.6.25-rc3 ehci_hcd
[    8.726295] usb usb5: SerialNumber: 0000:00:10.4
[    9.929964] usb 1-1: new low speed USB device using uhci_hcd and address 4
[   10.247359] usb 1-1: configuration #1 chosen from 1 choice
[   10.260932] usb 1-1: New USB device found, idVendor=046d, idProduct=c30e
[   10.260943] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   10.261941] usb 1-1: Product: HID compliant keyboard
[   10.262934] usb 1-1: Manufacturer: Logitech
[   10.415781] input: Logitech HID compliant keyboard as /devices/pci0000:00/0000:00:10.0/usb1/1-1/1-1:1.0/input/input4
[   10.423784] input: USB HID v1.10 Keyboard [Logitech HID compliant keyboard] on usb-0000:00:10.0-1
[   10.541005] input: Logitech HID compliant keyboard as /devices/pci0000:00/0000:00:10.0/usb1/1-1/1-1:1.1/input/input5
[   10.548101] input: USB HID v1.10 Device [Logitech HID compliant keyboard] on usb-0000:00:10.0-1
[   10.548150] usbcore: registered new interface driver usbhid
[   10.549106] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[   11.845963] EXT3 FS on sda5, internal journal
[   12.106726] ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 22
[   12.109317] PCI: Setting latency timer of device 0000:00:11.5 to 64
[   13.563728] kjournald starting.  Commit interval 5 seconds
[   13.564105] EXT3 FS on sda6, internal journal
[   13.564737] EXT3-fs: mounted filesystem with ordered data mode.
[   13.580239] kjournald starting.  Commit interval 5 seconds
[   13.580260] EXT3 FS on sda8, internal journal
[   13.581246] EXT3-fs: mounted filesystem with ordered data mode.
[   13.593682] kjournald starting.  Commit interval 5 seconds
[   13.593703] EXT3 FS on sda10, internal journal
[   13.594689] EXT3-fs: mounted filesystem with ordered data mode.
[   13.613507] kjournald starting.  Commit interval 5 seconds
[   13.614519] EXT3 FS on sda7, internal journal
[   13.615507] EXT3-fs: mounted filesystem with ordered data mode.
[   13.708612] Adding 1020112k swap on /dev/sda2.  Priority:-1 extents:1 across:1020112k
[   23.195904] skge eth1: enabling interface
[   24.514414] NET: Registered protocol family 17
[   24.863180] skge eth1: Link is up at 100 Mbps, full duplex, flow control both
[   26.924077] Marking TSC unstable due to cpufreq changes
[   26.924709] Time: acpi_pm clocksource has been installed.
[   27.205091] Clocksource tsc unstable (delta = -137792982 ns)

lspci -v:
19:36:35 [marcin@joi:~/kernel/linux-git]$ lspci -v
00:00.0 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge
        Subsystem: ASUSTeK Computer Inc. A8V Deluxe
        Flags: bus master, 66MHz, medium devsel, latency 64
        Memory at <ignored> (32-bit, prefetchable)
        Capabilities: <access denied>

00:00.1 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge
        Flags: bus master, medium devsel, latency 0

00:00.2 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge
        Flags: bus master, medium devsel, latency 0

00:00.3 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge
        Flags: bus master, medium devsel, latency 0

00:00.4 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge
        Flags: bus master, medium devsel, latency 0

00:00.7 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge
        Flags: bus master, medium devsel, latency 0

00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI bridge [K8T800/K8T890 South] (prog-if 00 [Normal decode])
        Flags: bus master, 66MHz, medium devsel, latency 0
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
        Memory behind bridge: faf00000-fbffffff
        Prefetchable memory behind bridge: f0000000-f9ffffff
        Capabilities: <access denied>

00:0a.0 Ethernet controller: Marvell Technology Group Ltd. 88E8001 Gigabit Ethernet Controller (rev 13)
        Subsystem: ASUSTeK Computer Inc. Marvell 88E8001 Gigabit Ethernet Controller (Asus)
        Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 17
        Memory at fab00000 (32-bit, non-prefetchable) [size=16K]
        I/O ports at a800 [size=256]
        Expansion ROM at faa00000 [disabled] [size=128K]
        Capabilities: <access denied>

00:0c.0 Ethernet controller: Compex ReadyLink 2000 (rev 0a)
        Flags: medium devsel, IRQ 17
        I/O ports at b000 [size=32]
        Expansion ROM at fac00000 [disabled] [size=32K]

00:0d.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11)
        Flags: bus master, medium devsel, latency 64, IRQ 18
        Memory at efe00000 (32-bit, prefetchable) [size=4K]
        Capabilities: <access denied>

00:0d.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11)
        Flags: bus master, medium devsel, latency 64, IRQ 5
        Memory at eff00000 (32-bit, prefetchable) [size=4K]
        Capabilities: <access denied>

00:0f.0 RAID bus controller: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80)
        Subsystem: ASUSTeK Computer Inc. A7V600/K8V Deluxe/K8V-X/A8V Deluxe motherboard
        Flags: bus master, medium devsel, latency 64, IRQ 20
        I/O ports at d000 [size=8]
        I/O ports at c800 [size=4]
        I/O ports at c400 [size=8]
        I/O ports at c000 [size=4]
        I/O ports at b800 [size=16]
        I/O ports at b400 [size=256]
        Capabilities: <access denied>

00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP])
        Subsystem: ASUSTeK Computer Inc. A7V600/K8V-X/A8V Deluxe motherboard
        Flags: bus master, medium devsel, latency 32, IRQ 20
        [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
        [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
        [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
        [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
        I/O ports at fc00 [size=16]
        Capabilities: <access denied>

00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI])
        Subsystem: ASUSTeK Computer Inc. A7V600/K8V-X/A8V Deluxe motherboard
        Flags: bus master, medium devsel, latency 64, IRQ 21
        I/O ports at d400 [size=32]
        Capabilities: <access denied>

00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI])
        Subsystem: ASUSTeK Computer Inc. A7V600/K8V-X/A8V Deluxe motherboard
        Flags: bus master, medium devsel, latency 64, IRQ 21
        I/O ports at d800 [size=32]
        Capabilities: <access denied>

00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI])
        Subsystem: ASUSTeK Computer Inc. A7V600/K8V-X/A8V Deluxe motherboard
        Flags: bus master, medium devsel, latency 64, IRQ 21
        I/O ports at e000 [size=32]
        Capabilities: <access denied>

00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI])
        Subsystem: ASUSTeK Computer Inc. A7V600/K8V-X/A8V Deluxe motherboard
        Flags: bus master, medium devsel, latency 64, IRQ 21
        I/O ports at e400 [size=32]
        Capabilities: <access denied>

00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86) (prog-if 20 [EHCI])
        Subsystem: ASUSTeK Computer Inc. A7V600/K8V-X/A8V Deluxe motherboard
        Flags: bus master, medium devsel, latency 64, IRQ 21
        Memory at fae00000 (32-bit, non-prefetchable) [size=256]
        Capabilities: <access denied>

00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South]
        Subsystem: ASUSTeK Computer Inc. A7V600/K8V-X/A8V Deluxe motherboard
        Flags: bus master, stepping, medium devsel, latency 0
        Capabilities: <access denied>

00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60)
        Subsystem: ASUSTeK Computer Inc. A8V Deluxe motherboard (Realtek ALC850 codec)
        Flags: medium devsel, IRQ 22
        I/O ports at e800 [size=256]
        Capabilities: <access denied>

00:11.6 Communication controller: VIA Technologies, Inc. AC'97 Modem Controller (rev 80)
        Flags: medium devsel
        I/O ports at 1000 [disabled] [size=256]
        Capabilities: <access denied>

00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
        Flags: fast devsel
        Capabilities: <access denied>

00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
        Flags: fast devsel

00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
        Flags: fast devsel

00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
        Flags: fast devsel

01:00.0 VGA compatible controller: nVidia Corporation NV34 [GeForce FX 5200] (rev a1) (prog-if 00 [VGA])
        Subsystem: PROLINK Microsystems Corp Unknown device 1152
        Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 16
        Memory at fb000000 (32-bit, non-prefetchable) [size=16M]
        Memory at f0000000 (32-bit, prefetchable) [size=128M]
        Expansion ROM at faf00000 [disabled] [size=128K]
        Capabilities: <access denied>



#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.25-rc3
# Sat Mar  1 17:06:24 2008
#
CONFIG_64BIT=y
# CONFIG_X86_32 is not set
CONFIG_X86_64=y
CONFIG_X86=y
# CONFIG_GENERIC_LOCKBREAK is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_FAST_CMPXCHG_LOCAL=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
# CONFIG_QUICKLIST is not set
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_DMI=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ZONE_DMA32=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
# CONFIG_KTIME_SCALAR is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"

#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=18
# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
# CONFIG_MARKERS is not set
CONFIG_OPROFILE=y
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
CONFIG_BLOCK_COMPAT=y

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_CLASSIC_RCU=y
# CONFIG_PREEMPT_RCU is not set

#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_SMP is not set
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_X86_RDC321X is not set
# CONFIG_X86_VSMP is not set
# CONFIG_PARAVIRT_GUEST is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
CONFIG_MK8=y
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_L1_CACHE_BYTES=64
CONFIG_X86_INTERNODE_CACHE_BYTES=64
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_GART_IOMMU=y
# CONFIG_CALGARY_IOMMU is not set
CONFIG_IOMMU_HELPER=y
CONFIG_SWIOTLB=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
# CONFIG_RCU_TRACE is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_MCE=y
# CONFIG_X86_MCE_INTEL is not set
CONFIG_X86_MCE_AMD=y
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_RESOURCES_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MTRR=y
# CONFIG_EFI is not set
# CONFIG_SECCOMP is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_SCHED_HRTICK=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x200000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x200000
CONFIG_COMPAT_VDSO=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y

#
# Power management options
#
CONFIG_PM=y
# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
# CONFIG_HIBERNATION is not set
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_PROCFS=y
CONFIG_ACPI_PROCFS_POWER=y
CONFIG_ACPI_SYSFS_POWER=y
CONFIG_ACPI_PROC_EVENT=y
CONFIG_ACPI_AC=y
# CONFIG_ACPI_BATTERY is not set
CONFIG_ACPI_BUTTON=y
# CONFIG_ACPI_VIDEO is not set
CONFIG_ACPI_FAN=y
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_WMI is not set
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
CONFIG_ACPI_DEBUG=y
# CONFIG_ACPI_DEBUG_FUNC_TRACE is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
# CONFIG_ACPI_CONTAINER is not set
# CONFIG_ACPI_SBS is not set

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y

#
# CPUFreq processor drivers
#
CONFIG_X86_ACPI_CPUFREQ=y
CONFIG_X86_POWERNOW_K8=y
CONFIG_X86_POWERNOW_K8_ACPI=y
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_P4_CLOCKMOD is not set

#
# shared options
#
CONFIG_X86_ACPI_CPUFREQ_PROC_INTF=y
# CONFIG_X86_SPEEDSTEP_LIB is not set
# CONFIG_CPU_IDLE is not set

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
CONFIG_DMAR=y
CONFIG_DMAR_GFX_WA=y
CONFIG_DMAR_FLOPPY_WA=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
CONFIG_HT_IRQ=y
CONFIG_ISA_DMA_API=y
CONFIG_K8_NB=y
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
CONFIG_IA32_EMULATION=y
# CONFIG_IA32_AOUT is not set
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y

#
# Networking
#
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=m
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_MULTIPLE_TABLES is not set
# CONFIG_IP_ROUTE_MULTIPATH is not set
# CONFIG_IP_ROUTE_VERBOSE is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y

#
# Core Netfilter Configuration
#
# CONFIG_NETFILTER_NETLINK_QUEUE is not set
# CONFIG_NETFILTER_NETLINK_LOG is not set
# CONFIG_NF_CONNTRACK is not set
CONFIG_NETFILTER_XTABLES=y
# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
# CONFIG_NETFILTER_XT_TARGET_MARK is not set
# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
# CONFIG_NETFILTER_XT_MATCH_ESP is not set
# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_MAC is not set
# CONFIG_NETFILTER_XT_MATCH_MARK is not set
# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
# CONFIG_NETFILTER_XT_MATCH_REALM is not set
# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
# CONFIG_NETFILTER_XT_MATCH_STRING is not set
# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
# CONFIG_NETFILTER_XT_MATCH_TIME is not set
# CONFIG_NETFILTER_XT_MATCH_U32 is not set
# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set

#
# IP: Netfilter Configuration
#
# CONFIG_IP_NF_QUEUE is not set
CONFIG_IP_NF_IPTABLES=y
# CONFIG_IP_NF_MATCH_RECENT is not set
# CONFIG_IP_NF_MATCH_ECN is not set
# CONFIG_IP_NF_MATCH_AH is not set
# CONFIG_IP_NF_MATCH_TTL is not set
# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_TARGET_REJECT=y
# CONFIG_IP_NF_TARGET_LOG is not set
# CONFIG_IP_NF_TARGET_ULOG is not set
CONFIG_IP_NF_MANGLE=y
# CONFIG_IP_NF_TARGET_ECN is not set
# CONFIG_IP_NF_TARGET_TTL is not set
# CONFIG_IP_NF_RAW is not set
# CONFIG_IP_NF_ARPTABLES is not set
# CONFIG_IP_DCCP is not set
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
CONFIG_SCTP_HMAC_SHA1=y
# CONFIG_SCTP_HMAC_MD5 is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set

#
# Wireless
#
# CONFIG_CFG80211 is not set
# CONFIG_WIRELESS_EXT is not set
# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set

#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_XIP is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_MISC_DEVICES is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set

#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_SCSI_PROC_FS is not set

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
CONFIG_SCSI_SCAN_ASYNC=y
CONFIG_SCSI_WAIT_SCAN=m

#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_ACPI=y
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIL24 is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
CONFIG_SATA_VIA=y
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_PATA_ACPI is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
CONFIG_PATA_VIA=y
# CONFIG_PATA_WINBOND is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
CONFIG_VETH=m
# CONFIG_NET_SB1000 is not set
# CONFIG_ARCNET is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
CONFIG_NE2K_PCI=y
CONFIG_8139CP=m
CONFIG_8139TOO=m
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
# CONFIG_E1000E_ENABLED is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
CONFIG_SKGE=y
CONFIG_SKY2=m
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
CONFIG_QLA3XXX=m
# CONFIG_ATL1 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set

#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set

#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
# CONFIG_PPP_FILTER is not set
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
# CONFIG_PPP_MPPE is not set
CONFIG_PPPOE=m
# CONFIG_PPPOL2TP is not set
# CONFIG_SLIP is not set
CONFIG_SLHC=m
# CONFIG_NET_FC is not set
CONFIG_NETCONSOLE=y
# CONFIG_NETCONSOLE_DYNAMIC is not set
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set

#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set
CONFIG_FIX_EARLYCON_MEM=y

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
CONFIG_RTC=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
# CONFIG_HPET_RTC_IRQ is not set
CONFIG_HPET_MMAP=y
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_D