login
Search
OK - I think that this is wat you are looking for. If there is anything else I can proivde or if I have mucked up this simple cut and paste just let me know. Chris /proc/timer_list after a "standard" boot up: Timer List Version: v0.3 HRTIMER_MAX_CLOCK_BASES: 2 now at 145975685977 nsecs cpu: 0 clock 0: .index: 0 .resolution: 1 nsecs .get_time: ktime_get_real .offset: 1202395158972331114 nsecs active timers: clock 1: .index: 1 .resolution: 1 nsecs .get_time: ktime_get .offset: 0 nsecs active timers: #0: <f731fee0>, tick_sched_timer, S:01 # expires at 145976000000 nsecs [in 314023 nsecs] #1: <f731fee0>, it_real_fn, S:01 # expires at 145992695933 nsecs [in 17009956 nsecs] #2: <f731fee0>, it_real_fn, S:01 # expires at 146449411457 nsecs [in 473725480 nsecs] #3: <f731fee0>, it_real_fn, S:01 # expires at 147127669217 nsecs [in 1151983240 nsecs] #4: <f731fee0>, hrtimer_wakeup, S:01 # expires at 148894085562 nsecs [in 2918399585 nsecs] #5: <f731fee0>, hrtimer_wakeup, S:01 # expires at 149298827121 nsecs [in 3323141144 nsecs] #6: <f731fee0>, hrtimer_wakeup, S:01 # expires at 162723437247 nsecs [in 16747751270 nsecs] #7: <f731fee0>, hrtimer_wakeup, S:01 # expires at 168492312121 nsecs [in 22516626144 nsecs] #8: <f731fee0>, it_real_fn, S:01 # expires at 170611081082 nsecs [in 24635395105 nsecs] #9: <f731fee0>, hrtimer_wakeup, S:01 # expires at 326651677345 nsecs [in 180675991368 nsecs] #10: <f731fee0>, hrtimer_wakeup, S:01 # expires at 3659678299700 nsecs [in 3513702613723 nsecs] #11: <f731fee0>, it_real_fn, S:01 # expires at 28835194687544 nsecs [in 28689219001567 nsecs] .expires_next : 145976000000 nsecs .hres_active : 1 .nr_events : 37758 .nohz_mode : 0 .idle_tick : 0 nsecs .tick_stopped : 0 .idle_jiffies : 0 .idle_calls : 0 .idle_sleeps : 0 .idle_entrytime : 0 nsecs .idle_waketime : 0 nsecs .idle_exittime : 0 nsecs .idle_sleeptime : 0 nsecs .last_jiffies : 0 .next_jiffies : 0 .idle_expires : 0 nsecs jiffies: 4294928789 cpu: 1 clock 0: .index: 0 .resolution: 1 nsecs .get_time: ktime_get_real .offset: 1202395158972331114 nsecs active timers: clock 1: .index: 1 .resolution: 1 nsecs .get_time: ktime_get .offset: 0 nsecs active timers: #0: <f731fee0>, tick_sched_timer, S:01 # expires at 145977000000 nsecs [in 1314023 nsecs] #1: <f731fee0>, hrtimer_wakeup, S:01 # expires at 146450056749 nsecs [in 474370772 nsecs] #2: <f731fee0>, it_real_fn, S:01 # expires at 146530328664 nsecs [in 554642687 nsecs] #3: <f731fee0>, it_real_fn, S:01 # expires at 146532250137 nsecs [in 556564160 nsecs] #4: <f731fee0>, hrtimer_wakeup, S:01 # expires at 146922960856 nsecs [in 947274879 nsecs] #5: <f731fee0>, hrtimer_wakeup, S:01 # expires at 148523613563 nsecs [in 2547927586 nsecs] #6: <f731fee0>, hrtimer_wakeup, S:01 # expires at 148933815562 nsecs [in 2958129585 nsecs] #7: <f731fee0>, hrtimer_wakeup, S:01 # expires at 149290566563 nsecs [in 3314880586 nsecs] #8: <f731fee0>, it_real_fn, S:01 # expires at 369336019712 nsecs [in 223360333735 nsecs] #9: <f731fee0>, it_real_fn, S:01 # expires at 428337135469 nsecs [in 282361449492 nsecs] #10: <f731fee0>, it_real_fn, S:01 # expires at 428337155862 nsecs [in 282361469885 nsecs] .expires_next : 145977000000 nsecs .hres_active : 1 .nr_events : 37563 .nohz_mode : 0 .idle_tick : 0 nsecs .tick_stopped : 0 .idle_jiffies : 0 .idle_calls : 0 .idle_sleeps : 0 .idle_entrytime : 0 nsecs .idle_waketime : 0 nsecs .idle_exittime : 0 nsecs .idle_sleeptime : 0 nsecs .last_jiffies : 0 .next_jiffies : 0 .idle_expires : 0 nsecs jiffies: 4294928789 Tick Device: mode: 1 Clock Event Device: pit max_delta_ns: 27461866 min_delta_ns: 12571 mult: 5124677 shift: 32 mode: 3 next_event: 9223372036854775807 nsecs set_next_event: pit_next_event set_mode: init_pit_timer event_handler: tick_handle_oneshot_broadcast tick_broadcast_mask: 00000000 tick_broadcast_oneshot_mask: 00000000 Tick Device: mode: 1 Clock Event Device: lapic max_delta_ns: 667653374 min_delta_ns: 1193 mult: 53963320 shift: 32 mode: 3 next_event: 145976000000 nsecs set_next_event: lapic_next_event set_mode: lapic_timer_setup event_handler: hrtimer_interrupt Tick Device: mode: 1 Clock Event Device: lapic max_delta_ns: 667653374 min_delta_ns: 1193 mult: 53963320 shift: 32 mode: 3 next_event: 145977000000 nsecs set_next_event: lapic_next_event set_mode: lapic_timer_setup event_handler: hrtimer_interrupt /proc/timer_list after a boot with nohpet Timer List Version: v0.3 HRTIMER_MAX_CLOCK_BASES: 2 now at 171066146878 nsecs cpu: 0 clock 0: .index: 0 .resolution: 1 nsecs .get_time: ktime_get_real .offset: 1202395423739038399 nsecs active timers: clock 1: .index: 1 .resolution: 1 nsecs .get_time: ktime_get .offset: 0 nsecs active timers: #0: <f716fee0>, tick_sched_timer, S:01 # expires at 171068000000 nsecs [in 1853122 nsecs] #1: <f716fee0>, it_real_fn, S:01 # expires at 171083183094 nsecs [in 17036216 nsecs] #2: <f716fee0>, hrtimer_wakeup, S:01 # expires at 175358934008 nsecs [in 4292787130 nsecs] #3: <f716fee0>, hrtimer_wakeup, S:01 # expires at 182090152277 nsecs [in 11024005399 nsecs] #4: <f716fee0>, hrtimer_wakeup, S:01 # expires at 325302655989 nsecs [in 154236509111 nsecs] #5: <f716fee0>, it_real_fn, S:01 # expires at 435908045854 nsecs [in 264841898976 nsecs] #6: <f716fee0>, hrtimer_wakeup, S:01 # expires at 3658204415582 nsecs [in 3487138268704 nsecs] #7: <f716fee0>, it_real_fn, S:01 # expires at 6097909798313 nsecs [in 5926843651435 nsecs] #8: <f716fee0>, it_real_fn, S:01 # expires at 6102868101962 nsecs [in 5931801955084 nsecs] .expires_next : 171068000000 nsecs .hres_active : 1 .nr_events : 44462 .nohz_mode : 0 .idle_tick : 0 nsecs .tick_stopped : 0 .idle_jiffies : 0 .idle_calls : 0 .idle_sleeps : 0 .idle_entrytime : 0 nsecs .idle_waketime : 0 nsecs .idle_exittime : 0 nsecs .idle_sleeptime : 0 nsecs .last_jiffies : 0 .next_jiffies : 0 .idle_expires : 0 nsecs jiffies: 4294935062 cpu: 1 clock 0: .index: 0 .resolution: 1 nsecs .get_time: ktime_get_real .offset: 1202395423739038399 nsecs active timers: clock 1: .index: 1 .resolution: 1 nsecs .get_time: ktime_get .offset: 0 nsecs active timers: #0: <f716fee0>, hrtimer_wakeup, S:01 # expires at 171067250091 nsecs [in 1103213 nsecs] #1: <f716fee0>, tick_sched_timer, S:01 # expires at 171069000000 nsecs [in 2853122 nsecs] #2: <f716fee0>, it_real_fn, S:01 # expires at 171938332904 nsecs [in 872186026 nsecs] #3: <f716fee0>, it_real_fn, S:01 # expires at 171944071955 nsecs [in 877925077 nsecs] #4: <f716fee0>, it_real_fn, S:01 # expires at 172219525550 nsecs [in 1153378672 nsecs] #5: <f716fee0>, it_real_fn, S:01 # expires at 172219574719 nsecs [in 1153427841 nsecs] #6: <f716fee0>, hrtimer_wakeup, S:01 # expires at 197743378587 nsecs [in 26677231709 nsecs] #7: <f716fee0>, it_real_fn, S:01 # expires at 198867018554 nsecs [in 27800871676 nsecs] #8: <f716fee0>, it_real_fn, S:01 # expires at 487909125576 nsecs [in 316842978698 nsecs] #9: <f716fee0>, it_real_fn, S:01 # expires at 487909145969 nsecs [in 316842999091 nsecs] #10: <f716fee0>, it_real_fn, S:01 # expires at 28834687377400 nsecs [in 28663621230522 nsecs] .expires_next : 171067250091 nsecs .hres_active : 1 .nr_events : 43680 .nohz_mode : 0 .idle_tick : 0 nsecs .tick_stopped : 0 .idle_jiffies : 0 .idle_calls : 0 .idle_sleeps : 0 .idle_entrytime : 0 nsecs .idle_waketime : 0 nsecs .idle_exittime : 0 nsecs .idle_sleeptime : 0 nsecs .last_jiffies : 0 .next_jiffies : 0 .idle_expires : 0 nsecs jiffies: 4294935062 Tick Device: mode: 1 Clock Event Device: pit max_delta_ns: 27461866 min_delta_ns: 12571 mult: 5124677 shift: 32 mode: 3 next_event: 9223372036854775807 nsecs set_next_event: pit_next_event set_mode: init_pit_timer event_handler: tick_handle_oneshot_broadcast tick_broadcast_mask: 00000000 tick_broadcast_oneshot_mask: 00000000 Tick Device: mode: 1 Clock Event Device: lapic max_delta_ns: 667648586 min_delta_ns: 1193 mult: 53963707 shift: 32 mode: 3 next_event: 171068000000 nsecs set_next_event: lapic_next_event set_mode: lapic_timer_setup event_handler: hrtimer_interrupt Tick Device: mode: 1 Clock Event Device: lapic max_delta_ns: 667648586 min_delta_ns: 1193 mult: 53963707 shift: 32 mode: 3 next_event: 171067250091 nsecs set_next_event: lapic_next_event set_mode: lapic_timer_setup event_handler: hrtimer_interrupt The dmesg output after a "standard" boot: [ 0.000000] Linux version 2.6.24-git15 (root@popeye) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP PREEMPT Wed Feb 6 05:36:20 CST 2008 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable) [ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007fff0000 (usable) [ 0.000000] BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] 1151MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] Scan SMP from c0000000 for 1024 bytes. [ 0.000000] Scan SMP from c009fc00 for 1024 bytes. [ 0.000000] Scan SMP from c00f0000 for 65536 bytes. [ 0.000000] found SMP MP-table at [c00f5380] 000f5380 [ 0.000000] Entering add_active_range(0, 0, 524272) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 524272 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 524272 [ 0.000000] On node 0 totalpages: 524272 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2303 pages used for memmap [ 0.000000] HighMem zone: 292593 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP 000F9260, 0014 (r0 Nvidia) [ 0.000000] ACPI: RSDT 7FFF3040, 0030 (r1 Nvidia AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI: FACP 7FFF30C0, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI: DSDT 7FFF3180, 63C4 (r1 NVIDIA AWRDACPI 1000 MSFT 100000E) [ 0.000000] ACPI: FACS 7FFF0000, 0040 [ 0.000000] ACPI: MCFG 7FFF9680, 003C (r1 Nvidia AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI: APIC 7FFF95C0, 0072 (r1 Nvidia AWRDACPI 42302E31 AWRD 0) [ 0.000000] Nvidia board detected. Ignoring ACPI timer override. [ 0.000000] If you got timer trouble try acpi_use_timer_override [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 15:11 APIC version 16 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 15:11 APIC version 16 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000) [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 520177 [ 0.000000] Kernel command line: root=UUID=4dc2e6b0-c980-418b-8ad0-98358e7ec47d ro quiet splash [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 2412.397 MHz processor. [ 0.004000] spurious 8259A interrupt: IRQ7. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.004000] Memory: 2034196k/2097088k available (2071k kernel code, 61548k reserved, 952k data, 336k init, 1179584k highmem) [ 0.004000] virtual kernel memory layout: [ 0.004000] fixmap : 0xfff9b000 - 0xfffff000 ( 400 kB) [ 0.004000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.004000] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 0.004000] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 0.004000] .init : 0xc03f9000 - 0xc044d000 ( 336 kB) [ 0.004000] .data : 0xc0305f42 - 0xc03f3f60 ( 952 kB) [ 0.004000] .text : 0xc0100000 - 0xc0305f42 (2071 kB) [ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.084006] Calibrating delay using timer specific routine.. 4827.77 BogoMIPS (lpj=9655541) [ 0.084047] Security Framework initialized [ 0.084054] SELinux: Disabled at boot. [ 0.084069] Mount-cache hash table entries: 512 [ 0.084198] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.084200] CPU: L2 Cache: 512K (64 bytes/line) [ 0.084201] CPU 0(2) -> Core 0 [ 0.084207] Compat vDSO mapped to ffffe000. [ 0.084214] Checking 'hlt' instruction... OK. [ 0.100222] ACPI: Core revision 20070126 [ 0.109783] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4600+ stepping 01 [ 0.109801] Booting processor 1/1 ip 4000 [ 0.004000] Initializing CPU#1 [ 0.004000] Calibrating delay using timer specific routine.. 4825.08 BogoMIPS (lpj=9650168) [ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.004000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.004000] CPU 1(2) -> Core 1 [ 0.200189] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 4600+ stepping 01 [ 0.200199] Total of 2 processors activated (9652.85 BogoMIPS). [ 0.200337] ENABLING IO-APIC IRQs [ 0.200528] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1 [ 0.248015] Brought up 2 CPUs [ 0.248015] CPU0 attaching sched-domain: [ 0.248015] domain 0: span 3 [ 0.248015] groups: 1 2 [ 0.248015] CPU1 attaching sched-domain: [ 0.248015] domain 0: span 3 [ 0.248015] groups: 2 1 [ 0.248015] net_namespace: 552 bytes [ 0.248015] NET: Registered protocol family 16 [ 0.248015] EISA bus registered [ 0.248015] ACPI: bus type pci registered [ 0.248015] PCI: Using MMCONFIG [ 0.248015] PCI: No mmconfig possible on device 00:18 [ 0.248015] Setting up standard PCI resources [ 0.249896] ACPI: EC: Look up EC in DSDT [ 0.256196] ACPI: Interpreter enabled [ 0.256199] ACPI: (supports S0 S1 S5) [ 0.256208] ACPI: Using IOAPIC for interrupt routing [ 0.263393] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.263747] PCI: Transparent bridge - 0000:00:09.0 [ 0.264164] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.264386] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.317001] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.317159] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.317316] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 *5 7 9 10 11 12 14 15) [ 0.317471] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.317627] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.317784] ACPI: PCI Interrupt Link [LUBA] (IRQs *3 4 5 7 9 10 11 12 14 15) [ 0.317940] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.318097] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 7 9 10 *11 12 14 15) [ 0.318253] ACPI: PCI Interrupt Link [LACI] (IRQs *3 4 5 7 9 10 11 12 14 15) [ 0.318410] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 *10 11 12 14 15) [ 0.318566] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 7 9 10 *11 12 14 15) [ 0.318723] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 *5 7 9 10 11 12 14 15) [ 0.318878] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.319043] ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 *10 11 12 14 15) [ 0.319206] ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 7 9 10 *11 12 14 15) [ 0.319369] ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.319543] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. [ 0.319712] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. [ 0.319880] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0 [ 0.320117] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. [ 0.320227] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled. [ 0.320400] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0 [ 0.320574] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled. [ 0.320749] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0 [ 0.320922] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0 [ 0.321095] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0 [ 0.321268] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0 [ 0.321441] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0 [ 0.321613] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. [ 0.321794] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0 [ 0.321975] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0 [ 0.322155] ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled. [ 0.322271] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.322287] pnp: PnP ACPI init [ 0.322293] ACPI: bus type pnp registered [ 0.326778] pnpacpi: exceeded the max number of mem resources: 12 [ 0.326859] pnp: PnP ACPI: found 13 devices [ 0.326861] ACPI: ACPI bus type pnp unregistered [ 0.326863] PnPBIOS: Disabled by ACPI PNP [ 0.326960] PCI: Using ACPI for IRQ routing [ 0.326964] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 0.336022] NET: Registered protocol family 8 [ 0.336022] NET: Registered protocol family 20 [ 0.340026] system 00:01: ioport range 0x4000-0x407f has been reserved [ 0.340026] system 00:01: ioport range 0x4080-0x40ff has been reserved [ 0.340026] system 00:01: ioport range 0x4400-0x447f has been reserved [ 0.340026] system 00:01: ioport range 0x4480-0x44ff has been reserved [ 0.340026] system 00:01: ioport range 0x4800-0x487f has been reserved [ 0.340026] system 00:01: ioport range 0x4880-0x48ff has been reserved [ 0.340026] system 00:02: ioport range 0x4d0-0x4d1 has been reserved [ 0.340026] system 00:02: ioport range 0x290-0x29e has been reserved [ 0.340026] system 00:0b: iomem range 0xe0000000-0xefffffff could not be reserved [ 0.340026] system 00:0c: iomem range 0xf0000-0xf3fff could not be reserved [ 0.340026] system 00:0c: iomem range 0xf4000-0xf7fff could not be reserved [ 0.340026] system 00:0c: iomem range 0xf8000-0xfbfff could not be reserved [ 0.340026] system 00:0c: iomem range 0xfc000-0xfffff could not be reserved [ 0.340026] system 00:0c: iomem range 0x7fff0000-0x7fffffff could not be reserved [ 0.340026] system 00:0c: iomem range 0xffff0000-0xffffffff could not be reserved [ 0.340026] system 00:0c: iomem range 0x0-0x9ffff could not be reserved [ 0.340026] system 00:0c: iomem range 0x100000-0x7ffeffff could not be reserved [ 0.340026] system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.340026] system 00:0c: iomem range 0xfee00000-0xfeefffff could not be reserved [ 0.340026] system 00:0c: iomem range 0xfefff000-0xfeffffff could not be reserved [ 0.340026] system 00:0c: iomem range 0xfff80000-0xfff80fff could not be reserved [ 0.366551] PCI: Bridge: 0000:00:09.0 [ 0.366554] IO window: a000-afff [ 0.366556] MEM window: 0xfde00000-0xfdefffff [ 0.366558] PREFETCH window: 0x00000000fdf00000-0x00000000fdffffff [ 0.366560] PCI: Bridge: 0000:00:0b.0 [ 0.366562] IO window: 9000-9fff [ 0.366564] MEM window: 0xfdd00000-0xfddfffff [ 0.366566] PREFETCH window: 0x00000000fdc00000-0x00000000fdcfffff [ 0.366568] PCI: Bridge: 0000:00:0c.0 [ 0.366570] IO window: 8000-8fff [ 0.366572] MEM window: 0xfdb00000-0xfdbfffff [ 0.366574] PREFETCH window: 0x00000000fda00000-0x00000000fdafffff [ 0.366576] PCI: Bridge: 0000:00:0d.0 [ 0.366578] IO window: 7000-7fff [ 0.366580] MEM window: 0xfd900000-0xfd9fffff [ 0.366582] PREFETCH window: 0x00000000fd800000-0x00000000fd8fffff [ 0.366584] PCI: Bridge: 0000:00:0e.0 [ 0.366586] IO window: 6000-6fff [ 0.366588] MEM window: 0xfa000000-0xfcffffff [ 0.366590] PREFETCH window: 0x00000000d0000000-0x00000000dfffffff [ 0.366597] PCI: Setting latency timer of device 0000:00:09.0 to 64 [ 0.366604] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 0.366609] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 0.366614] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 0.366618] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 0.366651] NET: Registered protocol family 2 [ 0.368027] Time: acpi_pm clocksource has been installed. [ 0.368040] Switched to high resolution mode on CPU 0 [ 0.136022] Switched to high resolution mode on CPU 1 [ 0.384059] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.384059] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.384059] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.384059] TCP: Hash tables configured (established 131072 bind 65536) [ 0.384059] TCP reno registered [ 0.392059] checking if image is initramfs... it is [ 3.070806] Freeing initrd memory: 40453k freed [ 2.853085] audit: initializing netlink socket (disabled) [ 2.853085] type=2000 audit(1202373561.068:1): initialized [ 2.853085] highmem bounce pool size: 64 pages [ 2.853085] VFS: Disk quotas dquot_6.5.1 [ 2.853085] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 2.853085] io scheduler noop registered [ 2.853085] io scheduler anticipatory registered [ 2.853085] io scheduler deadline registered [ 2.853085] io scheduler cfq registered (default) [ 2.853110] pci 0000:00:0b.0: Linking AER extended capability [ 2.853114] pci 0000:00:0c.0: Linking AER extended capability [ 2.853117] pci 0000:00:0d.0: Linking AER extended capability [ 2.853120] pci 0000:00:0e.0: Linking AER extended capability [ 2.853126] pci 0000:05:00.0: Boot video device [ 2.853224] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 2.853239] assign_interrupt_mode Found MSI capability [ 2.853240] Allocate Port Service[0000:00:0b.0:pcie00] [ 2.853277] Allocate Port Service[0000:00:0b.0:pcie03] [ 2.853332] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 2.853344] assign_interrupt_mode Found MSI capability [ 2.853346] Allocate Port Service[0000:00:0c.0:pcie00] [ 2.853382] Allocate Port Service[0000:00:0c.0:pcie03] [ 2.853433] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 2.853446] assign_interrupt_mode Found MSI capability [ 2.853447] Allocate Port Service[0000:00:0d.0:pcie00] [ 2.853482] Allocate Port Service[0000:00:0d.0:pcie03] [ 2.857126] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 2.857139] assign_interrupt_mode Found MSI capability [ 2.857141] Allocate Port Service[0000:00:0e.0:pcie00] [ 2.857177] Allocate Port Service[0000:00:0e.0:pcie03] [ 2.857464] isapnp: Scanning for PnP cards... [ 3.209993] isapnp: No Plug & Play device found [ 3.234638] Real Time Clock Driver v1.12ac [ 3.234765] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 3.234877] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 3.235386] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 3.236271] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 3.236277] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 3.236280] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 3.236531] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 3.239281] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 3.239317] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 3.239463] mice: PS/2 mouse device common for all mice [ 3.239581] EISA: Probing bus 0 at eisa.0 [ 3.239591] Cannot allocate resource for EISA slot 4 [ 3.239595] Cannot allocate resource for EISA slot 6 [ 3.239596] Cannot allocate resource for EISA slot 7 [ 3.239598] Cannot allocate resource for EISA slot 8 [ 3.239599] EISA: Detected 0 cards. [ 3.239917] TCP cubic registered [ 3.239928] NET: Registered protocol family 1 [ 3.239956] Starting balanced_irq [ 3.239993] Using IPI No-Shortcut mode [ 3.240505] Freeing unused kernel memory: 336k freed [ 3.265271] input: AT Translated Set 2 keyboard as /class/input/input0 [ 4.465460] fuse init (API version 7.9) [ 4.467998] ACPI: Fan [FAN] (on) [ 4.474455] ACPI: Thermal Zone [THRM] (22 C) [ 4.869087] NFORCE-CK804: 0000:00:06.0 (rev f3) UDMA133 controller [ 4.869091] NFORCE-CK804: IDE controller (0x10de:0x0053 rev 0xf3) at PCI slot 0000:00:06.0 [ 4.869112] NFORCE-CK804: not 100% native mode: will probe irqs later [ 4.869116] NFORCE-CK804: BIOS didn't set cable bits correctly. Enabling workaround. [ 4.869123] ide0: BM-DMA at 0xe000-0xe007, BIOS settings: hda:DMA, hdb:DMA [ 4.869130] ide1: BM-DMA at 0xe008-0xe00f, BIOS settings: hdc:DMA, hdd:DMA [ 4.869136] Probing IDE interface ide0... [ 5.161737] usbcore: registered new interface driver usbfs [ 5.161765] usbcore: registered new interface driver hub [ 5.223172] usbcore: registered new device driver usb [ 5.224415] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 5.164942] hdb: Maxtor 6L250R0, ATA DISK drive [ 5.504008] hda: WDC WD2500JB-55REA0, ATA DISK drive [ 5.504008] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4 [ 5.504008] hda: UDMA/100 mode selected [ 5.504008] hdb: host max PIO5 wanted PIO255(auto-tune) selected PIO4 [ 5.504008] hdb: UDMA/133 mode selected [ 5.504008] Probing IDE interface ide1... [ 5.800420] hdd: Maxtor 6Y120P0, ATA DISK drive [ 6.144091] hdc: WDC WD2000BB-22GUC0, ATA DISK drive [ 6.144091] hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4 [ 6.144091] hdc: UDMA/100 mode selected [ 6.144091] hdd: host max PIO5 wanted PIO255(auto-tune) selected PIO4 [ 6.144091] hdd: UDMA/133 mode selected [ 6.144091] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 6.485787] ide1 at 0x170-0x177,0x376 on irq 15 [ 6.199065] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 23 [ 6.199072] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 23 (level, low) -> IRQ 23 [ 6.199084] PCI: Setting latency timer of device 0000:00:02.1 to 64 [ 6.199087] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 6.199258] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 [ 6.199285] ehci_hcd 0000:00:02.1: debug port 1 [ 6.199288] PCI: cache line size of 64 is not supported by device 0000:00:02.1 [ 6.199295] ehci_hcd 0000:00:02.1: irq 23, io mem 0xfe02e000 [ 6.214898] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 6.214898] usb usb1: configuration #1 chosen from 1 choice [ 6.214898] hub 1-0:1.0: USB hub found [ 6.214898] hub 1-0:1.0: 10 ports detected [ 6.636248] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61. [ 6.636248] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22 [ 6.636248] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCH] -> GSI 22 (level, low) -> IRQ 22 [ 6.636248] PCI: Setting latency timer of device 0000:00:0a.0 to 64 [ 6.336449] SCSI subsystem initialized [ 6.346135] libata version 3.00 loaded. [ 6.811714] usb 1-7: new high speed USB device using ehci_hcd and address 3 [ 7.187585] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:19:db:6d:3f:1b [ 7.187585] forcedeth 0000:00:0a.0: highdma csum timirq gbit lnktim desc-v3 [ 7.187585] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21 [ 7.187585] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 21 (level, low) -> IRQ 21 [ 7.187585] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 7.187585] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 7.187585] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 [ 7.187585] ohci_hcd 0000:00:02.0: irq 21, io mem 0xfe02f000 [ 7.246382] usb usb2: configuration #1 chosen from 1 choice [ 7.246382] hub 2-0:1.0: USB hub found [ 7.246382] hub 2-0:1.0: 10 ports detected [ 7.357935] usb 1-7: configuration #1 chosen from 1 choice [ 7.033519] sata_nv 0000:00:07.0: version 3.5 [ 7.033923] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 20 [ 7.033931] ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APSI] -> GSI 20 (level, low) -> IRQ 20 [ 7.033935] sata_nv 0000:00:07.0: Using ADMA mode [ 7.033974] PCI: Setting latency timer of device 0000:00:07.0 to 64 [ 7.034526] scsi0 : sata_nv [ 7.034526] scsi1 : sata_nv [ 7.034526] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xcc00 irq 20 [ 7.034526] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xcc08 irq 20 [ 7.378485] hda: max request size: 512KiB [ 7.395088] hda: 488397168 sectors (250059 MB) w/8192KiB Cache, CHS=30401/255/63 [ 7.395139] hda: cache flushes supported [ 7.395139] hda: hda1 [ 7.404883] hdb: max request size: 512KiB [ 7.406821] hdb: 490234752 sectors (251000 MB) w/16384KiB Cache, CHS=30515/255/63 [ 7.409804] hdb: cache flushes supported [ 7.409820] hdb: hdb1 [ 7.422228] hdc: max request size: 512KiB [ 7.423258] hdc: 390721968 sectors (200049 MB) w/2048KiB Cache, CHS=24321/255/63 [ 7.426067] hdc: cache flushes supported [ 7.426090] hdc: hdc1 hdc2 [ 7.469639] hdd: max request size: 128KiB [ 7.469639] hdd: 240121728 sectors (122942 MB) w/7936KiB Cache, CHS=65535/16/63 [ 7.469639] hdd: cache flushes supported [ 7.469639] hdd: hdd1 [ 7.713993] usb 2-3: new full speed USB device using ohci_hcd and address 2 [ 7.848902] EXT3-fs: mounted filesystem with ordered data mode. [ 7.848902] kjournald starting. Commit interval 5 seconds [ 7.532233] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 7.545121] ata1.00: ATA-7: Maxtor 7L250S0, BACE1G20, max UDMA/133 [ 7.545121] ata1.00: 490234752 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 7.949304] ata1.00: configured for UDMA/133 [ 7.970971] usb 2-3: configuration #1 chosen from 1 choice [ 7.584331] usbcore: registered new interface driver libusual [ 7.998490] Initializing USB Mass Storage driver... [ 7.998615] scsi2 : SCSI emulation for USB Mass Storage devices [ 7.998627] usb-storage: device found at 3 [ 7.998627] usb-storage: waiting for device to settle before scanning [ 7.998647] scsi3 : SCSI emulation for USB Mass Storage devices [ 7.998660] usbcore: registered new interface driver usb-storage [ 7.998660] USB Mass Storage support registered. [ 7.998660] usb-storage: device found at 2 [ 7.998660] usb-storage: waiting for device to settle before scanning [ 8.041301] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 8.594004] ata2.00: ATA-7: ST3750640NS, 3.AEG, max UDMA/133 [ 8.594004] ata2.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 8.666104] ata2.00: configured for UDMA/133 [ 8.170106] scsi 0:0:0:0: Direct-Access ATA Maxtor 7L250S0 BACE PQ: 0 ANSI: 5 [ 8.170106] ata1: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61 [ 8.170106] scsi 1:0:0:0: Direct-Access ATA ST3750640NS 3.AE PQ: 0 ANSI: 5 [ 8.170106] ata2: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61 [ 8.170106] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 23 [ 8.170106] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSJ] -> GSI 23 (level, low) -> IRQ 23 [ 8.170106] sata_nv 0000:00:08.0: Using ADMA mode [ 8.170106] PCI: Setting latency timer of device 0000:00:08.0 to 64 [ 8.170110] scsi4 : sata_nv [ 8.170113] scsi5 : sata_nv [ 8.170113] ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xb800 irq 23 [ 8.170113] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xb808 irq 23 [ 9.032240] ata3: SATA link down (SStatus 0 SControl 300) [ 9.579192] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 9.638685] ata4.00: ATA-7: ST3320620AS, 3.AAE, max UDMA/133 [ 9.638685] ata4.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 9.720936] ata4.00: configured for UDMA/133 [ 9.112264] scsi 5:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5 [ 9.112264] ata4: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61 [ 14.066583] usb-storage: device scan complete [ 14.067441] scsi 2:0:0:0: CD-ROM MAD DOG MD-16XDVD9 2.FD PQ: 0 ANSI: 0 [ 14.067996] usb-storage: device scan complete [ 14.077934] scsi 3:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0 [ 14.086895] scsi 3:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0 [ 14.095834] scsi 3:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0 [ 14.106296] scsi 3:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0 [ 15.995308] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 16.209137] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 14.937320] NET: Registered protocol family 10 [ 14.937660] lo: Disabled Privacy Extensions [ 15.184671] input: Power Button (FF) as /class/input/input1 [ 15.241244] ACPI: Power Button (FF) [PWRF] [ 15.241302] input: Power Button (CM) as /class/input/input2 [ 16.707287] input: PC Speaker as /class/input/input3 [ 15.298447] ACPI: Power Button (CM) [PWRB] [ 17.452022] Driver 'sd' needs updating - please use bus_type methods [ 17.452823] sd 0:0:0:0: [sda] 490234752 512-byte hardware sectors (251000 MB) [ 17.452844] sd 0:0:0:0: [sda] Write Protect is off [ 17.452846] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 17.452879] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 17.452953] sd 0:0:0:0: [sda] 490234752 512-byte hardware sectors (251000 MB) [ 17.452970] sd 0:0:0:0: [sda] Write Protect is off [ 17.452972] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 17.453003] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 17.453008] sda: sda1 [ 17.474060] sd 0:0:0:0: [sda] Attached SCSI disk [ 17.474189] sd 1:0:0:0: [sdb] 1465149168 512-byte hardware sectors (750156 MB) [ 17.474209] sd 1:0:0:0: [sdb] Write Protect is off [ 17.474211] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 17.474243] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 17.474299] sd 1:0:0:0: [sdb] 1465149168 512-byte hardware sectors (750156 MB) [ 17.474316] sd 1:0:0:0: [sdb] Write Protect is off [ 17.474318] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 17.474349] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 17.474351] sdb:<6>i2c-adapter i2c-0: nForce2 SMBus adapter at 0x4c00 [ 17.479384] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x4c40 [ 17.495992] sdb1 sdb2 [ 17.496084] sd 1:0:0:0: [sdb] Attached SCSI disk [ 17.496172] sd 5:0:0:0: [sdc] 625142448 512-byte hardware sectors (320073 MB) [ 17.496244] sd 5:0:0:0: [sdc] Write Protect is off [ 17.496247] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 17.503760] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 17.503868] sd 5:0:0:0: [sdc] 625142448 512-byte hardware sectors (320073 MB) [ 17.503887] sd 5:0:0:0: [sdc] Write Protect is off [ 17.503889] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 17.503920] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 17.503923] sdc: sdc1 [ 17.525086] sd 5:0:0:0: [sdc] Attached SCSI disk [ 17.549482] sd 3:0:0:0: [sdd] Attached SCSI removable disk [ 17.561872] sd 3:0:0:1: [sde] Attached SCSI removable disk [ 17.573540] sd 3:0:0:2: [sdf] Attached SCSI removable disk [ 17.586785] sd 3:0:0:3: [sdg] Attached SCSI removable disk [ 17.653084] Driver 'sr' needs updating - please use bus_type methods [ 17.668816] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 17.668842] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 17.668858] sd 5:0:0:0: Attached scsi generic sg2 type 0 [ 17.668874] sr 2:0:0:0: Attached scsi generic sg3 type 5 [ 17.668888] sd 3:0:0:0: Attached scsi generic sg4 type 0 [ 17.668888] sd 3:0:0:1: Attached scsi generic sg5 type 0 [ 17.668888] sd 3:0:0:2: Attached scsi generic sg6 type 0 [ 17.668888] sd 3:0:0:3: Attached scsi generic sg7 type 0 [ 17.687987] sr0: scsi3-mmc drive: 32x/48x writer cd/rw xa/form2 cdda tray [ 17.687993] Uniform CD-ROM driver Revision: 3.20 [ 17.688057] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 17.814351] input: ImPS/2 Generic Wheel Mouse as /class/input/input4 [ 17.861549] parport_pc 00:08: reported by Plug and Play ACPI [ 17.861596] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 18.082684] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22 [ 18.082684] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCJ] -> GSI 22 (level, low) -> IRQ 22 [ 18.082684] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 18.456387] intel8x0_measure_ac97_clock: measured 54734 usecs [ 18.456387] intel8x0: clocking to 46915 [ 18.879539] lp0: using parport0 (interrupt-driven). [ 18.958808] Adding 10241428k swap on /dev/hdc2. Priority:-1 extents:1 across:10241428k [ 19.311667] EXT3 FS on hda1, internal journal [ 21.319190] kjournald starting. Commit interval 5 seconds [ 21.324908] EXT3 FS on hdb1, internal journal [ 21.324912] EXT3-fs: mounted filesystem with ordered data mode. [ 21.356817] kjournald starting. Commit interval 5 seconds [ 21.365089] EXT3 FS on hdc1, internal journal [ 21.365089] EXT3-fs: mounted filesystem with ordered data mode. [ 21.388235] kjournald starting. Commit interval 5 seconds [ 21.396310] EXT3 FS on hdd1, internal journal [ 21.396310] EXT3-fs: mounted filesystem with ordered data mode. [ 21.414567] kjournald starting. Commit interval 5 seconds [ 21.426785] EXT3 FS on sda1, internal journal [ 21.426785] EXT3-fs: mounted filesystem with ordered data mode. [ 21.468745] kjournald starting. Commit interval 5 seconds [ 21.476952] EXT3 FS on sdb1, internal journal [ 21.476952] EXT3-fs: mounted filesystem with ordered data mode. [ 21.512642] kjournald starting. Commit interval 5 seconds [ 21.522036] EXT3 FS on sdb2, internal journal [ 21.522039] EXT3-fs: mounted filesystem with ordered data mode. [ 21.555424] kjournald starting. Commit interval 5 seconds [ 21.563537] EXT3 FS on sdc1, internal journal [ 21.563537] EXT3-fs: mounted filesystem with ordered data mode. [ 22.598576] No dock devices found. [ 22.621486] toshiba_acpi: Unknown parameter `hotkeys_over_acpi' [ 20.757088] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4600+ processors (2 cpu cores) (version 2.20.00) [ 22.928525] powernow-k8: MP systems not supported by PSB BIOS structure [ 20.757101] powernow-k8: MP systems not supported by PSB BIOS structure [ 26.534253] ppdev: user-space parallel port driver [ 28.342837] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) [ 28.342846] apm: disabled - APM is not SMP safe. [ 26.092403] eth1: no IPv6 routers present [ 45.280890] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use) The dmesg output after a boot with "nohpet" [ 0.000000] Linux version 2.6.24-git15 (root@popeye) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP PREEMPT Wed Feb 6 05:36:20 CST 2008 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable) [ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007fff0000 (usable) [ 0.000000] BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] 1151MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] Scan SMP from c0000000 for 1024 bytes. [ 0.000000] Scan SMP from c009fc00 for 1024 bytes. [ 0.000000] Scan SMP from c00f0000 for 65536 bytes. [ 0.000000] found SMP MP-table at [c00f5380] 000f5380 [ 0.000000] Entering add_active_range(0, 0, 524272) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 524272 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 524272 [ 0.000000] On node 0 totalpages: 524272 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2303 pages used for memmap [ 0.000000] HighMem zone: 292593 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP 000F9260, 0014 (r0 Nvidia) [ 0.000000] ACPI: RSDT 7FFF3040, 0030 (r1 Nvidia AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI: FACP 7FFF30C0, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI: DSDT 7FFF3180, 63C4 (r1 NVIDIA AWRDACPI 1000 MSFT 100000E) [ 0.000000] ACPI: FACS 7FFF0000, 0040 [ 0.000000] ACPI: MCFG 7FFF9680, 003C (r1 Nvidia AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI: APIC 7FFF95C0, 0072 (r1 Nvidia AWRDACPI 42302E31 AWRD 0) [ 0.000000] Nvidia board detected. Ignoring ACPI timer override. [ 0.000000] If you got timer trouble try acpi_use_timer_override [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 15:11 APIC version 16 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 15:11 APIC version 16 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000) [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 520177 [ 0.000000] Kernel command line: root=UUID=4dc2e6b0-c980-418b-8ad0-98358e7ec47d ro quiet splash nohpet [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 2412.394 MHz processor. [ 0.004000] spurious 8259A interrupt: IRQ7. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.004000] Memory: 2034196k/2097088k available (2071k kernel code, 61548k reserved, 952k data, 336k init, 1179584k highmem) [ 0.004000] virtual kernel memory layout: [ 0.004000] fixmap : 0xfff9b000 - 0xfffff000 ( 400 kB) [ 0.004000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.004000] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 0.004000] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 0.004000] .init : 0xc03f9000 - 0xc044d000 ( 336 kB) [ 0.004000] .data : 0xc0305f42 - 0xc03f3f60 ( 952 kB) [ 0.004000] .text : 0xc0100000 - 0xc0305f42 (2071 kB) [ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.084006] Calibrating delay using timer specific routine.. 4827.76 BogoMIPS (lpj=9655528) [ 0.084047] Security Framework initialized [ 0.084054] SELinux: Disabled at boot. [ 0.084069] Mount-cache hash table entries: 512 [ 0.084197] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.084199] CPU: L2 Cache: 512K (64 bytes/line) [ 0.084201] CPU 0(2) -> Core 0 [ 0.084207] Compat vDSO mapped to ffffe000. [ 0.084214] Checking 'hlt' instruction... OK. [ 0.100222] ACPI: Core revision 20070126 [ 0.109785] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4600+ stepping 01 [ 0.109803] Booting processor 1/1 ip 4000 [ 0.004000] Initializing CPU#1 [ 0.004000] Calibrating delay using timer specific routine.. 4825.07 BogoMIPS (lpj=9650141) [ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.004000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.004000] CPU 1(2) -> Core 1 [ 0.200194] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 4600+ stepping 01 [ 0.200204] Total of 2 processors activated (9652.83 BogoMIPS). [ 0.200341] ENABLING IO-APIC IRQs [ 0.200532] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1 [ 0.248015] Brought up 2 CPUs [ 0.248015] CPU0 attaching sched-domain: [ 0.248015] domain 0: span 3 [ 0.248015] groups: 1 2 [ 0.248015] CPU1 attaching sched-domain: [ 0.248015] domain 0: span 3 [ 0.248015] groups: 2 1 [ 0.248015] net_namespace: 552 bytes [ 0.248015] NET: Registered protocol family 16 [ 0.248015] EISA bus registered [ 0.248015] ACPI: bus type pci registered [ 0.248015] PCI: Using MMCONFIG [ 0.248015] PCI: No mmconfig possible on device 00:18 [ 0.248015] Setting up standard PCI resources [ 0.249884] ACPI: EC: Look up EC in DSDT [ 0.256196] ACPI: Interpreter enabled [ 0.256198] ACPI: (supports S0 S1 S5) [ 0.256208] ACPI: Using IOAPIC for interrupt routing [ 0.263422] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.263776] PCI: Transparent bridge - 0000:00:09.0 [ 0.264195] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.264417] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.317029] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.317186] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.317343] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 *5 7 9 10 11 12 14 15) [ 0.317498] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.317653] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.317810] ACPI: PCI Interrupt Link [LUBA] (IRQs *3 4 5 7 9 10 11 12 14 15) [ 0.317966] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.318122] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 7 9 10 *11 12 14 15) [ 0.318278] ACPI: PCI Interrupt Link [LACI] (IRQs *3 4 5 7 9 10 11 12 14 15) [ 0.318434] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 *10 11 12 14 15) [ 0.318590] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 7 9 10 *11 12 14 15) [ 0.318747] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 *5 7 9 10 11 12 14 15) [ 0.318901] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.319066] ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 *10 11 12 14 15) [ 0.319229] ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 7 9 10 *11 12 14 15) [ 0.319392] ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.319565] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. [ 0.319734] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. [ 0.319902] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0 [ 0.320140] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. [ 0.320249] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled. [ 0.320423] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0 [ 0.320596] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled. [ 0.320771] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0 [ 0.320944] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0 [ 0.321116] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0 [ 0.321289] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0 [ 0.321461] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0 [ 0.321634] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. [ 0.321814] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0 [ 0.321994] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0 [ 0.322174] ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled. [ 0.322289] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.322306] pnp: PnP ACPI init [ 0.322311] ACPI: bus type pnp registered [ 0.326790] pnpacpi: exceeded the max number of mem resources: 12 [ 0.326871] pnp: PnP ACPI: found 13 devices [ 0.326873] ACPI: ACPI bus type pnp unregistered [ 0.326876] PnPBIOS: Disabled by ACPI PNP [ 0.326973] PCI: Using ACPI for IRQ routing [ 0.326976] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 0.336022] NET: Registered protocol family 8 [ 0.336022] NET: Registered protocol family 20 [ 0.340027] system 00:01: ioport range 0x4000-0x407f has been reserved [ 0.340027] system 00:01: ioport range 0x4080-0x40ff has been reserved [ 0.340027] system 00:01: ioport range 0x4400-0x447f has been reserved [ 0.340027] system 00:01: ioport range 0x4480-0x44ff has been reserved [ 0.340027] system 00:01: ioport range 0x4800-0x487f has been reserved [ 0.340027] system 00:01: ioport range 0x4880-0x48ff has been reserved [ 0.340027] system 00:02: ioport range 0x4d0-0x4d1 has been reserved [ 0.340027] system 00:02: ioport range 0x290-0x29e has been reserved [ 0.340027] system 00:0b: iomem range 0xe0000000-0xefffffff could not be reserved [ 0.340027] system 00:0c: iomem range 0xf0000-0xf3fff could not be reserved [ 0.340027] system 00:0c: iomem range 0xf4000-0xf7fff could not be reserved [ 0.340027] system 00:0c: iomem range 0xf8000-0xfbfff could not be reserved [ 0.340027] system 00:0c: iomem range 0xfc000-0xfffff could not be reserved [ 0.340027] system 00:0c: iomem range 0x7fff0000-0x7fffffff could not be reserved [ 0.340027] system 00:0c: iomem range 0xffff0000-0xffffffff could not be reserved [ 0.340027] system 00:0c: iomem range 0x0-0x9ffff could not be reserved [ 0.340027] system 00:0c: iomem range 0x100000-0x7ffeffff could not be reserved [ 0.340027] system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.340027] system 00:0c: iomem range 0xfee00000-0xfeefffff could not be reserved [ 0.340027] system 00:0c: iomem range 0xfefff000-0xfeffffff could not be reserved [ 0.340027] system 00:0c: iomem range 0xfff80000-0xfff80fff could not be reserved [ 0.366551] PCI: Bridge: 0000:00:09.0 [ 0.366554] IO window: a000-afff [ 0.366556] MEM window: 0xfde00000-0xfdefffff [ 0.366558] PREFETCH window: 0x00000000fdf00000-0x00000000fdffffff [ 0.366560] PCI: Bridge: 0000:00:0b.0 [ 0.366562] IO window: 9000-9fff [ 0.366564] MEM window: 0xfdd00000-0xfddfffff [ 0.366566] PREFETCH window: 0x00000000fdc00000-0x00000000fdcfffff [ 0.366568] PCI: Bridge: 0000:00:0c.0 [ 0.366570] IO window: 8000-8fff [ 0.366572] MEM window: 0xfdb00000-0xfdbfffff [ 0.366574] PREFETCH window: 0x00000000fda00000-0x00000000fdafffff [ 0.366576] PCI: Bridge: 0000:00:0d.0 [ 0.366578] IO window: 7000-7fff [ 0.366580] MEM window: 0xfd900000-0xfd9fffff [ 0.366582] PREFETCH window: 0x00000000fd800000-0x00000000fd8fffff [ 0.366584] PCI: Bridge: 0000:00:0e.0 [ 0.366586] IO window: 6000-6fff [ 0.366588] MEM window: 0xfa000000-0xfcffffff [ 0.366590] PREFETCH window: 0x00000000d0000000-0x00000000dfffffff [ 0.366597] PCI: Setting latency timer of device 0000:00:09.0 to 64 [ 0.366604] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 0.366609] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 0.366614] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 0.366619] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 0.366651] NET: Registered protocol family 2 [ 0.368027] Time: acpi_pm clocksource has been installed. [ 0.368040] Switched to high resolution mode on CPU 0 [ 0.136022] Switched to high resolution mode on CPU 1 [ 0.384058] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.384058] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.384058] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.384058] TCP: Hash tables configured (established 131072 bind 65536) [ 0.384058] TCP reno registered [ 0.392059] checking if image is initramfs... it is [ 3.070820] Freeing initrd memory: 40453k freed [ 2.853113] audit: initializing netlink socket (disabled) [ 2.853113] type=2000 audit(1202373826.068:1): initialized [ 2.853113] highmem bounce pool size: 64 pages [ 2.853113] VFS: Disk quotas dquot_6.5.1 [ 2.853113] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 2.853113] io scheduler noop registered [ 2.853113] io scheduler anticipatory registered [ 2.853113] io scheduler deadline registered [ 2.853113] io scheduler cfq registered (default) [ 2.853138] pci 0000:00:0b.0: Linking AER extended capability [ 2.853142] pci 0000:00:0c.0: Linking AER extended capability [ 2.853145] pci 0000:00:0d.0: Linking AER extended capability [ 2.853148] pci 0000:00:0e.0: Linking AER extended capability [ 2.853153] pci 0000:05:00.0: Boot video device [ 2.853252] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 2.853266] assign_interrupt_mode Found MSI capability [ 2.853268] Allocate Port Service[0000:00:0b.0:pcie00] [ 2.853306] Allocate Port Service[0000:00:0b.0:pcie03] [ 2.853360] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 2.853372] assign_interrupt_mode Found MSI capability [ 2.853374] Allocate Port Service[0000:00:0c.0:pcie00] [ 2.853410] Allocate Port Service[0000:00:0c.0:pcie03] [ 2.853461] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 2.853474] assign_interrupt_mode Found MSI capability [ 2.853476] Allocate Port Service[0000:00:0d.0:pcie00] [ 2.857122] Allocate Port Service[0000:00:0d.0:pcie03] [ 2.857176] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 2.857188] assign_interrupt_mode Found MSI capability [ 2.857190] Allocate Port Service[0000:00:0e.0:pcie00] [ 2.857226] Allocate Port Service[0000:00:0e.0:pcie03] [ 2.857515] isapnp: Scanning for PnP cards... [ 3.210044] isapnp: No Plug & Play device found [ 3.234537] Real Time Clock Driver v1.12ac [ 3.234660] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 3.234770] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 3.235257] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 3.236083] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 3.236089] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 3.236092] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 3.236335] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 3.239234] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 3.239239] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 3.467643] mice: PS/2 mouse device common for all mice [ 3.467797] EISA: Probing bus 0 at eisa.0 [ 3.467809] Cannot allocate resource for EISA slot 4 [ 3.467813] Cannot allocate resource for EISA slot 6 [ 3.467814] Cannot allocate resource for EISA slot 7 [ 3.467816] Cannot allocate resource for EISA slot 8 [ 3.467817] EISA: Detected 0 cards. [ 3.468144] TCP cubic registered [ 3.468156] NET: Registered protocol family 1 [ 3.468183] Starting balanced_irq [ 3.468228] Using IPI No-Shortcut mode [ 3.468758] Freeing unused kernel memory: 336k freed [ 3.265766] input: AT Translated Set 2 keyboard as /class/input/input0 [ 4.419842] fuse init (API version 7.9) [ 4.672567] ACPI: Fan [FAN] (on) [ 4.430555] ACPI: Thermal Zone [THRM] (22 C) [ 4.751276] SCSI subsystem initialized [ 4.769714] libata version 3.00 loaded. [ 5.040104] NFORCE-CK804: 0000:00:06.0 (rev f3) UDMA133 controller [ 5.040108] NFORCE-CK804: IDE controller (0x10de:0x0053 rev 0xf3) at PCI slot 0000:00:06.0 [ 5.040129] NFORCE-CK804: not 100% native mode: will probe irqs later [ 5.040132] NFORCE-CK804: BIOS didn't set cable bits correctly. Enabling workaround. [ 5.040140] ide0: BM-DMA at 0xe000-0xe007, BIOS settings: hda:DMA, hdb:DMA [ 5.040147] ide1: BM-DMA at 0xe008-0xe00f, BIOS settings: hdc:DMA, hdd:DMA [ 5.040152] Probing IDE interface ide0... [ 4.824409] usbcore: registered new interface driver usbfs [ 4.824434] usbcore: registered new interface driver hub [ 4.853793] usbcore: registered new device driver usb [ 4.963266] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 5.326081] hdb: Maxtor 6L250R0, ATA DISK drive [ 5.679727] hda: WDC WD2500JB-55REA0, ATA DISK drive [ 5.679727] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4 [ 5.679727] hda: UDMA/100 mode selected [ 5.679727] hdb: host max PIO5 wanted PIO255(auto-tune) selected PIO4 [ 5.679727] hdb: UDMA/133 mode selected [ 5.679727] Probing IDE interface ide1... [ 5.984712] hdd: Maxtor 6Y120P0, ATA DISK drive [ 6.338211] hdc: WDC WD2000BB-22GUC0, ATA DISK drive [ 6.338231] hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4 [ 6.339438] hdc: UDMA/100 mode selected [ 6.339595] hdd: host max PIO5 wanted PIO255(auto-tune) selected PIO4 [ 6.339595] hdd: UDMA/133 mode selected [ 6.339595] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 6.379258] ide1 at 0x170-0x177,0x376 on irq 15 [ 6.400200] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61. [ 6.400516] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23 [ 6.400523] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCH] -> GSI 23 (level, low) -> IRQ 23 [ 6.400528] PCI: Setting latency timer of device 0000:00:0a.0 to 64 [ 6.411189] hda: max request size: 512KiB [ 6.424786] hda: 488397168 sectors (250059 MB) w/8192KiB Cache, CHS=30401/255/63 [ 6.424835] hda: cache flushes supported [ 6.424835] hda: hda1 [ 6.436138] hdb: max request size: 512KiB [ 6.436986] hdb: 490234752 sectors (251000 MB) w/16384KiB Cache, CHS=30515/255/63 [ 6.439864] hdb: cache flushes supported [ 6.439886] hdb: hdb1 [ 6.442458] hdc: max request size: 512KiB [ 6.443912] hdc: 390721968 sectors (200049 MB) w/2048KiB Cache, CHS=24321/255/63 [ 6.447335] hdc: cache flushes supported [ 6.447335] hdc: hdc1 hdc2 [ 6.495359] hdd: max request size: 128KiB [ 6.495472] hdd: 240121728 sectors (122942 MB) w/7936KiB Cache, CHS=65535/16/63 [ 6.495588] hdd: cache flushes supported [ 6.495588] hdd: hdd1 [ 6.523111] kjournald starting. Commit interval 5 seconds [ 6.870268] EXT3-fs: mounted filesystem with ordered data mode. [ 7.025516] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:19:db:6d:3f:1b [ 7.025516] forcedeth 0000:00:0a.0: highdma csum timirq gbit lnktim desc-v3 [ 6.657566] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22 [ 6.657577] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 22 (level, low) -> IRQ 22 [ 6.657592] PCI: Setting latency timer of device 0000:00:02.1 to 64 [ 6.657595] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 6.657936] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 [ 6.657966] ehci_hcd 0000:00:02.1: debug port 1 [ 6.657969] PCI: cache line size of 64 is not supported by device 0000:00:02.1 [ 6.657978] ehci_hcd 0000:00:02.1: irq 22, io mem 0xfe02e000 [ 6.673503] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 6.673606] usb usb1: configuration #1 chosen from 1 choice [ 6.673618] hub 1-0:1.0: USB hub found [ 6.673618] hub 1-0:1.0: 10 ports detected [ 7.168019] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21 [ 7.168028] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 21 (level, low) -> IRQ 21 [ 7.168041] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 7.168044] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 7.168077] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 [ 7.168091] ohci_hcd 0000:00:02.0: irq 21, io mem 0xfe02f000 [ 7.240780] usb usb2: configuration #1 chosen from 1 choice [ 7.240780] hub 2-0:1.0: USB hub found [ 7.240780] hub 2-0:1.0: 10 ports detected [ 7.370809] sata_nv 0000:00:07.0: version 3.5 [ 7.370809] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 20 [ 7.370809]
| Tarkan Erimer | Re: Dual-Licensing Linux Kernel with GPL V2 and GPL V3 |
| Steven Rostedt | Re: Major regression on hackbench with SLUB |
| Nick Piggin | 2.6.24-rc2 slab vs slob tbench numbers |
| Paul Jackson | Re: cpuset-remove-sched-domain-hooks-from-cpusets |
git: | |
| David Miller | Re: [GIT]: Networking |
| Gerrit Renker | [PATCH 27/37] dccp: Integration of dynamic feature activation - part 2 (server side) |
| Jarek Poplawski | [PATCH] pkt_sched: Destroy gen estimators under rtnl_lock(). |
| Frans Pop | svc: failed to register lockdv1 RPC service (errno 97). |
