On Wed, Feb 06, 2008 at 11:42:40AM +0100, Jiri Slaby wrote:
quoted text
> On 02/05/2008 11:57 PM, Tino Keitel wrote:
> > Hi,
> >
> > I tried the current git (9ef9dc69d4167276c04590d67ee55de8380bc1ad) and
> > got the following error message from ath5k:
> >
> > ath5k_pci 0000:02:00.0: registered as 'phy0'
> > ath5k phy0: failed to resume the MAC Chip
> > ath5k_pci: probe of 0000:02:00.0 failed with error -5
>
> We failed to resume after a hardware reset here for a whole second. Is there any
> version of ath5k which worked for you (is this a regression)?

I cannot speak for Tino, but my ath5k never worked in MacBook -- it
failed the same way, and I believe the hardware was the same.  My
understanding was that it was a known bug with PCIE devices, but I got
that out of reading list archives.

quoted text
>
> > Here is the lspci -vnn output:
> >
> > 02:00.0 Ethernet controller [0200]: Atheros Communications, Inc.
> > AR5006EG 802.11 b/g Wireless PCI Express Adapter [168c:001c] (rev 01)
> > 	Subsystem: Apple Computer Inc. Unknown device [106b:0086]
> > 	Flags: fast devsel, IRQ 17
> > 	Memory at 90100000 (64-bit, non-prefetchable) [disabled]
> > 	[size=64K]
> > 	Capabilities: [40] Power Management version 2
> > 	Capabilities: [50] Message Signalled Interrupts: Mask- 64bit-
> > 	Queue=0/0 Enable-
> > 	Capabilities: [60] Express Legacy Endpoint, MSI 00
> > 	Capabilities: [90] MSI-X: Enable- Mask- TabSize=1
> > 	Capabilities: [100] Advanced Error Reporting <?>
> > 	Capabilities: [140] Virtual Channel <?>
> > 	Kernel modules: ath5k
> >
> > The same device works with madwifi:
> >
> > ath_rate_sample: 1.2 (svn r3339)
> > MadWifi: ath_attach: Switching per-packet transmit power control off
> > wifi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
> > wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
> > wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps
> > 24Mbps 36Mbps 48Mbps 54Mbps
> > wifi0: turboG rates: 6Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
> > wifi0: H/W encryption support: WEP AES AES_CCM TKIP
> > wifi0: ath_announce: Use hw queue 1 for WME_AC_BE traffic
> > wifi0: ath_announce: Use hw queue 0 for WME_AC_BK traffic
> > wifi0: ath_announce: Use hw queue 2 for WME_AC_VI traffic
> > wifi0: ath_announce: Use hw queue 3 for WME_AC_VO traffic
> > wifi0: ath_announce: Use hw queue 8 for CAB traffic
> > wifi0: ath_announce: Use hw queue 9 for beacons
> > ath_pci: wifi0: Atheros 5424/2424: mem=0x90100000, irq=17
> >
> > I can also set the interface up and use iwlist ath0 scan.
>
> Hmm, I guess madwif-old-openhal doesn't work either.
>
> I suspect ath5k_hw_nic_wakeup being called before setting ah_single_chip in
> ath5k_hw_attach. Could you test the attached patch?

I cannot, as my MacBook is now broken.

--
Joseph Fannin
jfannin@gmail.com
--
unsubscribe notice
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/