On 13:33, Chris Snook wrote:

quoted text
> >During the daily cron job that uses rsync to sync a 500G file system
> >from another machine to the raid on the 3ware controller the load
> >jumps up, and the machine becomes sluggish as hell. For example, an
> >ssh login to that machine takes minutes to complete and ldap becomes
> >unreliable while the rsync job is running. Even Nagios complains
> >about the machine being down while rsync is running.
>=20
> You're putting your box under astronomical load.  This is generally=20
> regarded as a bad idea, regardless of how well your storage controller=20
> is performing.

The machine becomes sluggish also when I write directly to the raid
array. A simple

	dd if=3D/dev/zero of=3Dtmpfile

shouldn't push the load up to 4, right?

quoted text
> Can you measure the single-threaded throughput (say,=20
> coping one huge file, and then syncing) to give us a baseline=20
> performance figure?

Single threaded throughput seems to be ok (140M/s). The problem is
that the machine becomes unresponsive.

Andre
--=20
The only person who always got his work done by Friday was Robinson Crusoe