This patch adds support to build the regulator core.
Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com>
---
drivers/Kconfig | 2 ++
drivers/Makefile | 1 +
drivers/regulator/Kconfig | 32 ++++++++++++++++++++++++++++++++
drivers/regulator/Makefile | 9 +++++++++
4 files changed, 44 insertions(+), 0 deletions(-)
create mode 100644 drivers/regulator/Kconfig
create mode 100644 drivers/regulator/Makefile
diff --git a/drivers/Kconfig b/drivers/Kconfig
index 3a0e354..cc5946c 100644
--- a/drivers/Kconfig
+++ b/drivers/Kconfig
@@ -62,6 +62,8 @@ source "drivers/hwmon/Kconfig"
source "drivers/thermal/Kconfig"
+source "drivers/regulator/Kconfig"
+
source "drivers/watchdog/Kconfig"
source "drivers/ssb/Kconfig"
diff --git a/drivers/Makefile b/drivers/Makefile
index e5e394a..3d0264e 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -66,6 +66,7 @@ obj-$(CONFIG_W1) += w1/
obj-$(CONFIG_POWER_SUPPLY) += power/
obj-$(CONFIG_HWMON) += hwmon/
obj-$(CONFIG_THERMAL) += thermal/
+obj-$(CONFIG_REGULATOR) += regulator/
obj-$(CONFIG_WATCHDOG) += watchdog/
obj-$(CONFIG_PHONE) += telephony/
obj-$(CONFIG_MD) += md/
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
new file mode 100644
index 0000000..51b8d06
--- /dev/null
+++ b/drivers/regulator/Kconfig
@@ -0,0 +1,32 @@
+menu "Voltage and Current regulators"
+
+config REGULATOR
+ bool "Voltage and Current Regulator Support"
+ default n
+ help
+ Generic Voltage and Current Regulator support.
+
+ This framework is designed to provide a generic interface to voltage
+ and current regulators within the Linux kernel. It's intended to
+ provide voltage and current control to client or consumer drivers and
+ also provide status information to user space applications through a
+ sysfs interface.
+
+ The intention is to allow systems to dynamically control regulator
+ output in order to save power and prolong battery life. This applies
+ to both voltage regulators (where voltage output is controllable) and
+ current sinks (where current output is controllable).
+
+ This framework safely compiles out if not selected so that client
+ drivers can still be used in systems with no software controllable
+ regulators.
+
+ If unsure, say no.
+
+config REGULATOR_DEBUG
+ bool "Regulator debug support"
+ depends on REGULATOR
+ help
+ Say yes here to enable debugging support.
+
+endmenu
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
new file mode 100644
index 0000000..3f70871
--- /dev/null
+++ b/drivers/regulator/Makefile
@@ -0,0 +1,9 @@
+#
+# Makefile for regulator drivers.
+#
+
+obj-$(CONFIG_REGULATOR) += reg-core.o
+
+ifeq ($(CONFIG_REGULATOR_DEBUG),y)
+ EXTRA_CFLAGS += -DDEBUG
+endif
--
1.5.4.2
--
