[2.6.25-rc0 System no longer powers off after shutdown

Previous message: [thread] [date] [author]
Next message: [thread] [date] [author]
From: Frans Pop
Date: Monday, February 11, 2008 - 8:23 am

In general 2.6.25 if looking quite good on my desktop, but there's one
important issue: the system no longer powers off after shutdown.
This works fine with 2.6.24.

If there are any suggestions about patches to try or commits to revert,
please let me know. If not, I'll run a bisect.

Cheers,
FJP

Base Board Information
        Manufacturer: Intel Corporation
        Product Name: D945GCZ
        Version: AAC99567-502
BIOS Information
        Vendor: Intel Corp.
        Version: NT94510J.86A.4089.2007.0718.0501
        Release Date: 07/18/2007

Processor: Intel(R) Pentium(R) D CPU 3.20GHz

$ lspci -nn
00:00.0 Host bridge [0600]: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub [8086:2770] (rev 02)
00:02.0 VGA compatible controller [0300]: Intel Corporation 82945G/GZ Integrated Graphics Controller [8086:2772] (rev 02)
00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller [8086:27d8] (rev 01)
00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 [8086:27d0] (rev 01)
00:1c.2 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 [8086:27d4] (rev 01)
00:1c.3 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 [8086:27d6] (rev 01)
00:1c.4 PCI bridge [0604]: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI Express Port 5 [8086:27e0] (rev 01)
00:1c.5 PCI bridge [0604]: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI Express Port 6 [8086:27e2] (rev 01)
00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 [8086:27c8] (rev 01)
00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 [8086:27c9] (rev 01)
00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 [8086:27ca] (rev 01)
00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 [8086:27cb] (rev 01)
00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller [8086:27cc] (rev 01)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev e1)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge [8086:27b8] (rev 01)
00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE Controller [8086:27df] (rev 01)
00:1f.2 SATA controller [0106]: Intel Corporation 82801GR/GH (ICH7 Family) SATA AHCI Controller [8086:27c1] (rev 01)
00:1f.3 SMBus [0c05]: Intel Corporation 82801G (ICH7 Family) SMBus Controller [8086:27da] (rev 01)
01:00.0 Ethernet controller [0200]: Intel Corporation 82573E Gigabit Ethernet Controller (Copper) [8086:108c] (rev 03)
01:00.3 Serial controller [0700]: Intel Corporation Active Management Technology - SOL [8086:108f] (rev 03)
01:00.4 IPMI SMIC interface [0c07]: Intel Corporation 82573E KCS (Active Management) [8086:108e] (rev 03)
06:05.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link) [104c:8024]
Previous message: [thread] [date] [author]
Next message: [thread] [date] [author]

Messages in current thread:
[2.6.25-rc0 System no longer powers off after shutdown, Frans Pop, (Mon Feb 11, 8:23 am)
Re: [2.6.25-rc1] System no longer powers off after shutdown, Rafael J. Wysocki, (Wed Feb 13, 11:55 am)