> On Fri, Oct 24, 2008 at 7:35 PM, Mauro Carvalho Chehab
> <mchehab@infradead.org> wrote:
>> On Wed, 22 Oct 2008 22:59:00 +0200
>> "Markus Rechberger" <mrechberger@gmail.com> wrote:
>>
>>> em2880-dvb:
>>> * supporting the digital part of Empia based devices, which
>>> includes ATSC, ISDB-T and DVB-T
>>>
>>> em28xx-aad.c:
>>> * alternative audio driver, can be used instead of em28xx-audio if
>>> alsa is not available
>>> or not compiled into the kernel, it provides a raw interface to
>>> the PCM samples
>>>
>>> em28xx-audio.c:
>>> * em28xx alsa driver and audio driver for FM radio
>>>
>>> em28xx-audioep.c:
>>> * em28xx alsa driver for devices which are set to vendor specific
>>> audio on interface 1,
>>> in that case snd-usb-audio will not attach to the interface and
>>> em28xx-audioep will be needed
>>>
>>> em28xx-cards.c:
>>> * card definition and initial setup of devices.
>>>
>>> em28xx-core.c:
>>> * core videohandling and VBI frame slicing
>>>
>>> em28xx-i2c.c:
>>> * i2c setup and GPIO setup handling of the devices (including
>>> em2888 based ones)
>>>
>>> em28xx-input.c:
>>> * currently mostly disabled since the linuxtv input handling is
>>> broken by design and racy
>>>
>>> em28xx-keymaps.c:
>>> * keymap references of some remotes (could be merged into
>>> ir-common, although as mentioned
>>> this should be in userland done by lirc).
>>>
>>> em28xx-video.c:
>>> * inode handling for analog TV, radio and VBI, also some device probing
>>>
>>> em28xx-webcam.c:
>>> * videology webcam specific i2c commands
>>
>> NACK.
>>
>> There's already a driver for em28xx. Be welcome sending incremental patches to
>> improve, like other developers do. But another driver for the same chip would
>> just create a mess.
>>
>
> the description right above shows up what the current driver is
> missing, excluding the bugfixes.
> Technical reasons why the source is basically kept in the structure as
> it is, is eg. higher backward
> compatibility without having to update the whole system. See eeePC
> packages which are available
> from some vendors. The driver seamlessly works with the rest which is
> installed there, without
> any framework upgrade.
>
> Most users are currently using the drivers from mcentral.de since it's
> more stable and very
> well tested over the last 3 years. It was basically your decision to
> not merge it back then
>
http://mcentral.de/v4l-dvb/
>
> I pulled out the source and moved it together then and worked on
> additional device support.
>
>
http://mcentral.de/hg/~mrec/em28xx-new/shortlog
> There are more than 200 changesets pointing out how it evolved, if
> someone wants to have an indepth
> view about it. Bugreports and patches have been posted to the em28xx
> mailinglist where people worked
> on it, including enduser applications.
>
> The xc3028 as it is in the kernel is based on leaked and partly
> reverse engineered information.
> I know that because I was also CC'ed with the leaked driver information.
>
> The Xceive drivers which I submitted are the latest versions from
> Xceive addressing several bugs,
> you might not have access to their changelog.
>
> Before continuing any discussion the sourcecode and every statement I
> made for those patchsets
> should be commented, otherwise a discussion won't go anywhere.
>
