Christer Weinigel <christer@weinigel.se> wrote:

quoted text
> How do you find out the speed of the ISA bus?  AFAIK there is no
> standardized way to do that.  On the Geode SC2200 the ISA bus speed is
> usually the PCI clock divided by 4 giving 33MHz/4=8.3MHz or
> 30/4=7.5MHz, but with no external ISA devices it's possible to
> overclock the ISA bus to /3 to run it at 11MHz or so.  But without
> poking at some CPU and southbridge specific registers to find out the
> PCI bus speed and the ISA bus divisor you can't really tell.

If you overclock, you are on your own. IIRC I've used 13,3 MHz for some time
and used a lower PIO mode to compensate.

quoted text
> So if you do udelay based on a 6MHz clock (I think you can safely
> assume that any 386 based system runs the ISA bus at least that fast)
> you'll waste at least 30% and maybe even 100% more time for the delay
> after every _p call.

Defaulting to 8 MHz and offering an option to set another clock speed
(like idebus=) should be OK.

--
unsubscribe notice
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/