Alan Cox wrote:
quoted text >> This is going to put trouble in other places unless, at least, it can be
>> turned off. The UART serial interface is heavily emulated as a console
>> interface without an actual serial port behind it, both in hardware and
>> software. Rates will typically vastly exceed real serial port rates,
>
> Yes Dell do it, HP do it, IBM do it. Have done for years, never caused us
> a problem. Its only KVM tripping it.
>
> As to bit rate we support up to about 1 to 1.5 Mbit.
>
FWIW, the highest rate I've seen in hardware is a FIFO about 4K deep
that can be polled at about 25 MHz when all the overhead is accounted for.
-hpa
--
unsubscribe notice To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to
majordomo@vger.kernel.org
More majordomo info at
http://vger.kernel.org/majordomo-info.html
Please read the FAQ at
http://www.tux.org/lkml/
Messages in current thread:
Re: [PATCH] serial: remove "too much work for irq" printk , H. Peter Anvin , (Sat Jan 12, 5:58 pm)