Re: What's in linux-2.6-block.git for 2.6.24

!MAILaRCHIVE_VOTE_RePLACE
Previous message: [thread] [date] [author]
Next message: [thread] [date] [author]
To: FUJITA Tomonori <tomof@...>
Cc: <jens.axboe@...>, <linux-kernel@...>, <akpm@...>, <linux-scsi@...>, <linux-ide@...>, <fujita.tomonori@...>
Date: Tuesday, September 25, 2007 - 1:52 am

On 9/24/07, Torsten Kaiser <just.for.lkml@googlemail.com> wrote:

On the next boot it did show up again, so 2.6.23-rc7-mm1 still has the bug.

[   33.810000] md1: bitmap initialized from disk: read 10/10 pages, set 0 bits
[   33.810000] created bitmap (145 pages) for device md1
[   63.910000] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen
[   63.910000] ata1.00: cmd 61/08:00:09:d6:42/00:00:25:00:00/40 tag 0
cdb 0x0 data 4096 out
[   63.910000]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[   63.910000] ata1.00: status: {DRDY }
[   63.910000] ata1: hard resetting link
[   66.210000] ata1: softreset failed (port not ready)
[   66.210000] ata1: reset failed (errno=-5), retrying in 8 secs
[   73.910000] ata1: hard resetting link
[   76.210000] ata1: softreset failed (port not ready)
[   76.210000] ata1: reset failed (errno=-5), retrying in 8 secs
[   83.910000] ata1: hard resetting link
[   86.210000] ata1: softreset failed (port not ready)
[   86.210000] ata1: reset failed (errno=-5), retrying in 33 secs
[  118.910000] ata1: limiting SATA link speed to 1.5 Gbps
[  118.910000] ata1: hard resetting link
[  121.210000] ata1: softreset failed (port not ready)
[  121.210000] ata1: reset failed, giving up
[  121.210000] ata1.00: disabled
[  121.210000] ata1: EH complete
[  121.210000] sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET
driverbyte=DRIVER_OK,SUGGEST_OK
[  121.210000] end_request: I/O error, dev sda, sector 625137161
[  121.210000] md: super_written gets error=-5, uptodate=0
[  121.210000] raid5: Disk failure on sda2, disabling device.
Operation continuing on 2 devices

After that there are many more error like this in the log:
[  135.760000] sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET
driverbyte=DRIVER_OK,SUGGEST_OK
[  135.760000] end_request: I/O error, dev sda, sector 19551113
[  135.760000] Buffer I/O error on device sda2, logical block 1
or:
[  135.760000] sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET
driverbyte=DRIVER_OK,SUGGEST_OK
[  135.760000] end_request: I/O error, dev sda, sector 19551105

Torsten
-
Previous message: [thread] [date] [author]
Next message: [thread] [date] [author]

Messages in current thread:
What's in linux-2.6-block.git for 2.6.24, Jens Axboe, (Fri Sep 21, 4:57 am)
Re: What's in linux-2.6-block.git for 2.6.24, Torsten Kaiser, (Sun Sep 23, 9:19 am)
Re: What's in linux-2.6-block.git for 2.6.24, Alan Cox, (Sun Sep 23, 10:11 am)
Re: What's in linux-2.6-block.git for 2.6.24, Torsten Kaiser, (Sun Sep 23, 11:40 am)
Re: What's in linux-2.6-block.git for 2.6.24, FUJITA Tomonori, (Sun Sep 23, 9:55 am)
Re: What's in linux-2.6-block.git for 2.6.24, Torsten Kaiser, (Sun Sep 23, 11:31 am)
Re: What's in linux-2.6-block.git for 2.6.24, Torsten Kaiser, (Mon Sep 24, 2:48 pm)
Re: What's in linux-2.6-block.git for 2.6.24, Torsten Kaiser, (Tue Sep 25, 1:52 am)
Re: What's in linux-2.6-block.git for 2.6.24, Andrew Morton, (Fri Sep 21, 5:15 am)
Re: What's in linux-2.6-block.git for 2.6.24, Jens Axboe, (Fri Sep 21, 5:24 am)
Re: What's in linux-2.6-block.git for 2.6.24, Jens Axboe, (Fri Sep 21, 5:36 am)