On Mon, 24 Sep 2007 12:40:07 +1000 hce wrote:

quoted text
> Thanks Randy.
> 
> On 9/24/07, Randy Dunlap <randy.dunlap@oracle.com> wrote:
> > On Mon, 24 Sep 2007 08:52:36 +1000 hce wrote:
> >
> > > Hi,
> > >
> > > I am upgrading from kernel 2.6.11 to 2.6.22 on ARM S3C2400A and found
> > > a following issue on 2.6.22.
> > >
> > > On 2.6.11, I selected CONFIG_ISA,  CONFIG_NET_PCI and CONFIG_CS89X0 to
> > > build  CS8900A Ethernet driver to kernel, it was running perfect.
> > >
> > > But on 2.6.22, I made the same configuration for CS8900A, the cs89x0.o
> > > could not be compiled in to the kernel (or as a module when I tried to
> > > CONFIG_CS89X0=m) unless I commented out depends statement in
> > > drivers/net/Kconfig. I double checked all three are CONFIG_ISA=y,
> > > CONFIG_NET_PCI=y and CONFIG_CS89X0=y. Any explanation please, was I
> > > missing something here?
> >
> > I didn't look in 2.6.11 Kconfig files, but in 2.6.22, this driver is
> > limited to 3 specific boards:
> >
> > config CS89x0
> >         tristate "CS89x0 support"
> >         depends on NET_PCI && (ISA || MACH_IXDP2351 || ARCH_IXDP2X01 || ARCH_PNX010X)
> 
> The Kconfig for CS89x0 in 2.6.11 is exactly the same as 2.6.22.
> 
> > Does ARM S3C2400A qualify as any of those?  (MACH_... or ARCH_...)
> 
> I can run CS89x0 for ARM S3C2400 in 2.6.11, at least I can say yes,
> the ARM S3C2400A qualifies those in 2.6.11, I don't know the 2.6.22
> and I hope someone knows 2.6.22 well can answer it.
> 
> > (latter: ARCH_PNX010X is not used anywhere else AFAICT)
> 
> Yes, but you only need to enable ISA and NET_PCI to use CS89x0.

Right.

I don't have any problem building CS89x0 for X86_32:
make defconfig then enable ISA (what!?!?  why not in defconfig?)
and then enable CS89x0.

Please send your .config file.

---
~Randy
Phaedrus says that Quality is about caring.
-
unsubscribe notice
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/