On Thursday 13 September 2007, Takashi Iwai wrote:
quoted text
> > The patch below fixes it, but unfortunately, Medion MD2 uses the same PCI
> > (and subvendor/subdevice) ID -- so the patch quite likely breaks Medion
> > MD2 support.
>
> In that case, try to reset board_config after
> snd_hda_check_board_config() but before setup_preset().  See
> patch_alc885() for example (appeariny in the latest ALSA tree, also in
> mm tree).

Will do...

quoted text
> Otherwise it looks OK to me.  But, what is the primary difference in
> the setup between MD2 and WIM2160?

I don't know -- I made it work by trial and error (I don't have access to any 
hardware specs or the likes). By some more trial and error, I could minimize 
the patch some more - it's down to editing the init_verbs and mixers.
In the mixers, this one seems to be the key:
HDA_BIND_MUTE("Master Playback Switch", 0x0c, 2, HDA_INPUT)

Maybe we can get it to work with both MD2 and WIM2160 by using the MD2 mixers 
with this one added.

I'm not familiar enough with sound drivers in general to fiddle with the verbs 
and be reasonably sure I'm not breaking the MD2.