Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
---
Applies after patch "SCSI: split Kconfig menu into two".
I didn't want to change whitespace in the portions that this patch
moved from drivers/scsi/Kconfig to drivers/scsi/Kconfig.lowlevel,
hence produced this follow-up.
drivers/scsi/Kconfig.lowlevel | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
Index: linux-2.6.23-rc6/drivers/scsi/Kconfig.lowlevel
===================================================================
--- linux-2.6.23-rc6.orig/drivers/scsi/Kconfig.lowlevel
+++ linux-2.6.23-rc6/drivers/scsi/Kconfig.lowlevel
@@ -252,7 +252,7 @@ config SCSI_DPT_I2O
tristate "Adaptec I2O RAID support "
depends on !64BIT && SCSI && PCI && VIRT_TO_BUS
help
- This driver supports all of Adaptec's I2O based RAID controllers as
+ This driver supports all of Adaptec's I2O based RAID controllers as
well as the DPT SmartRaid V cards. This is an Adaptec maintained
driver by Deanna Bonds. See <file:Documentation/scsi/dpti.txt>.
@@ -457,7 +457,7 @@ config SCSI_GDTH
---help---
Formerly called GDT SCSI Disk Array Controller Support.
- This is a driver for RAID/SCSI Disk Array Controllers (EISA/ISA/PCI)
+ This is a driver for RAID/SCSI Disk Array Controllers (EISA/ISA/PCI)
manufactured by Intel Corporation/ICP vortex GmbH. It is documented
in the kernel source in <file:drivers/scsi/gdth.c> and
<file:drivers/scsi/gdth.h.>
@@ -491,7 +491,7 @@ config SCSI_GENERIC_NCR5380_MMIO
select SCSI_SPI_ATTRS
---help---
This is a driver for the old NCR 53c80 series of SCSI controllers
- on boards using memory mapped I/O.
+ on boards using memory mapped I/O.
It is explained in section 3.8 of the SCSI-HOWTO, available from
<http://www.tldp.org/docs.html#howto>. If it doesn't work out
of the box, you may have to change some settings in
@@ -1261,7 +1261,7 @@ config SCSI_DEBUG
each with multiple dummy SCSI devices (disks). It defaults to one
host adapter with one dummy SCSI disk. Each dummy disk uses kernel
RAM as storage (i.e. it is a ramdisk). To save space when multiple
- dummy disks are simulated, they share the same kernel RAM for
+ dummy disks are simulated, they share the same kernel RAM for
their storage. See <http://www.torque.net/sg/sdebug.html> for more
information. This driver is primarily of use to those testing the
SCSI and block subsystems. If unsure, say N.
--
Stefan Richter
-=====-=-=== =--= -===-
http://arcgraph.de/sr/
-
