On Thu, 13 Sep 2007, Mark Lord wrote:

quoted text
> Alan Stern wrote:
> > On Wed, 12 Sep 2007, Mark Lord wrote:
> > 
> >> Chuck Ebbert wrote:
> ..
> >>> Oh, nice. The usb-storage (SCSI) disk spins itself down and we can't handle that.
> >>> Should we be disabling auto-spindown when we connect the device, or be able to
> >>> handle this by sending the start command when needed?
> >> There's more to this.
> >>
> >> My Sandisk Cruzer Micro 1GB USB sticks suffer from this regression.
> > 
> > I seriously doubt that.  Are you claiming that your USB stick spins 
> > itself down during a suspend?  And then requires to be spun back up 
> > before it will resume proper operation?
> 
> No, the machine is not being suspended at all.
> 
> What happens is, there's a nice little LED on the Cruzer stick,
> that is "lit" when the stick itself is not in a "power suspend" state
> (or whatever you USB folks call it).

We call it "suspended".  (Wasn't there an episode of Classic Trek where 
Mr. Spock explained to somebody, "I call them `ears'."?)

quoted text
> On 2.6.22, that little LED stays "on" normally, and flickers off/on
> when data is being transfered.
> 
> The new "USB autosuspend" logic in 2.6.23 now causes that little LED
> to turn off after a few seconds of inactivity.
> 
> Once that happens, the USB stick is not accessible until after a longish
> timeout (~30s I think), followed by a USB reset.  Then it is usable again
> until the next inactivity timeout and autosuspend (a few seconds).

So this _isn't_ the regression described above -- to wit, that the 
drive gets spun down and then won't work without first being spun back 
up.  You wrote:

quoted text
> >> My Sandisk Cruzer Micro 1GB USB sticks suffer from this regression.

But it doesn't.  It suffers from a different regression.

Alan Stern

-
unsubscribe notice
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/