Cc: Benjamin Herrenschmidt <benh@...>, Pavel Machek <pavel@...>, Rafael J. Wysocki <rjw@...>, Matthew Garrett <mjg59@...>, <linux-kernel@...>, <linux-pm@...>, Alan Stern <stern@...>
On Jul 05, 2007, at 19:35:11, Nigel Cunningham wrote:
Umm, this thread is NOT ABOUT HIBERNATING!!! Please go back and read
the subject, specifically the "suspend to RAM" parts :-D. When your
hardware can put itself to sleep and atomically preserve memory as it
does so, you don't need an atomic copy. For Real Suspend(TM) (IE:
Suspend-to-RAM), the list of things to do is short and simple:
1) Stop DMA and put most hardware into low-power states (stops all
interrupt sources)
2) Ensure that the other CPUs have finished any trailing interrupt
handlers and put them to sleep
3) Put the interrupt-controllers into low-power state
4) Go to sleep
How about a freezer whose job it is to "wait for pending hard
interrupts to complete when we have already guaranteed that we won't
get any more"? That part should be really *REALLY* easy. You don't
need to care about either userspace processes or kernel threads at
all. Specifically, Step 1 consists of:
suspend_device(dev)
{
set_no_bind_flag(dev);
for (dev->subdevices)
suspend_device(dev);
set_no_io_flag(dev);
wait_for_in_progress_dma(dev);
turn_off_interrupts(dev);
go_to_low_power_state(dev);
}
After you've set the "no_bind" flag, you won't get any *new*
subdevices trying to bind, therefore it's safe to iterate over the
list of present sub-devices and suspend them. Once those are
suspended and in low-power states you can set a "no_io" flag to
prevent the driver from submitting more IO. At that point you can
lazily wait for existing DMA/IO/interrupts to finish on the device,
since *NOBODY* will be submitting them anymore, and we certainly
aren't probing for new devices. Then you can just turn off the power
to the device. When all the leaf devices are off, the parent device
can be turned off because everything waiting on the leaf devices is
blocked on them and won't unblock until the parent device *AND* the
leaf device are turned on again, in that order.
Scheduling and userspace are all still fully enabled in this
scenario. Once all your devices are turned off, the only remaining
running threads will be those which haven't done IO since the
beginning of the suspend. We can then disable preemption, turn off
the timer interrupts, and tell the other CPUs to park all their
remaining threads in schedule() and sleep. Then we put the IRQ
controller to sleep and go to sleep ourselves. If our driver model
locking is sufficient to handle putting a parent device to sleep
while threads are sleeping on a child device then there are exactly 0
problems.
Resuming is basically running the whole process in reverse. Runtime-
suspend is achieved by not setting the 'no_io' or 'no_bind' flags and
putting selective device-subtrees to sleep without doing anything to
the rest of the system.
Cheers,
Kyle Moffett
-
