Markus Armbruster wrote:
quoted text
> When enabling interrupts fails, the interrupt enable bit remains set
> in i8042_ctr.  Later writes of i8042_ctr to the hardware could
> accidentally retry enabling interrupts.  Clear the bit on failure.
> 
> Signed-off-by: Markus Armbruster <armbru@redhat.com>

This patch is more of a "make it right" than a fix, since the problem is 
highly unlikely to happen (but perhaps not so unlikely on virtual machines).

Acked-by: Steven Rostedt <rostedt@goodmis.org>

quoted text
> 
> ---
> 
> Some time ago Steven Rostedt and I went over this changeset:
> 
>     commit de9ce703c6b807b1dfef5942df4f2fadd0fdb67a
>     Author: Dmitry Torokhov <dtor@insightbb.com>
>     Date:   Sun Sep 10 21:57:21 2006 -0400
> 
>         Input: i8042 - get rid of polling timer
> 
>         Remove polling timer that was used to detect keybord/mice hotplug and
>         register both IRQs right away instead of waiting for a driver to
>         attach to a port.
> 
>         Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
> 
> Steven pointed out to me that it changes behavior when enabling IRQ
> fails.
> 
> The old code enabled IRQs this way:
> 
> 	i8042_ctr |= port->irqen;
> 
> 	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
> 		i8042_ctr &= ~port->irqen;
> 		return -1;
> 	}
> 
> i8042_ctr shadows the 8042's CTR.  So, when enabling fails, the bit is
> cleared in the shadow.
> 
> The new code does not clear the bit on the error path:
> 
> static int i8042_enable_kbd_port(void)
> {
> 	i8042_ctr &= ~I8042_CTR_KBDDIS;
> 	i8042_ctr |= I8042_CTR_KBDINT;
> 
> 	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
> 		printk(KERN_ERR "i8042.c: Failed to enable KBD port.\n");
> 		return -EIO;
> 	}
> 
> 	return 0;
> }
> 
> Same for i8042_enable_aux_port().
> 
> This leads to the question whether there are later writes of i8042_ctr
> (possibly with other bits altered) to the hardware, which could
> accidentally retry enabling interrupts.
> 
> I believe this possible, but unlikely.  Scenarios involve enable
> succeeding the first time, failing the second time, and succeeding the
> third time.  I can provide details, but the point I'd like to make is
> not that this is broken (although it is, strictly speaking), but that
> it is not obviously correct where it easily could be: just clear the
> interrupt enable bits when writing them to the hardware failed, like
> the old code did.
> 
> diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c
> index db9cca3..71a7e39 100644
> --- a/drivers/input/serio/i8042.c
> +++ b/drivers/input/serio/i8042.c
> @@ -385,6 +385,7 @@ static int i8042_enable_kbd_port(void)
>  	i8042_ctr |= I8042_CTR_KBDINT;
>  
>  	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
> +		i8042_ctr &= ~I8042_CTR_KBDINT;
>  		printk(KERN_ERR "i8042.c: Failed to enable KBD port.\n");
>  		return -EIO;
>  	}
> @@ -402,6 +403,7 @@ static int i8042_enable_aux_port(void)
>  	i8042_ctr |= I8042_CTR_AUXINT;
>  
>  	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
> +		i8042_ctr &= ~I8042_CTR_AUXINT;
>  		printk(KERN_ERR "i8042.c: Failed to enable AUX port.\n");
>  		return -EIO;
>  	}

-
unsubscribe notice
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/