-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
I'm trying to move some disks from my PPC desktop to a dedicated
server. Yesterday my system looked like this:
1. /dev/md0 372.61Gb (sda1+missing)
2. /dev/hdb 74.53Gb
3. /dev/sdb 298.09Gb
Now with the paycheck, I bought a third SATA disk (400Gb). I new from
the start that disk wouldn't fit in my desktopbox, so I also bought a
500W PSU (I had a huge server case without PSU from previously).
I was a little impatient, so I added the new disk (physically just
dangling outside the box :) to the LVM (as md1+missing).
The idea was to re-create sdb as mdX+missing, so I tried pvmove sdb.
But instantly received a lot of errors. Now I can't remove it
from the VG!
My new server is a i386, and I already had a disk with Linux installed
for Intel, so that disk was also moved (from another server I don't
need any more - it was a Pentium 1 - to slow! :).
In with the system disk, in with the LVM disk and started. The system
had to be upgraded (from Ubuntu 6.xx to 7.04 - Feisty). Took a couple
of hours, and when that was done, I started to get the MD's working.
No go... One of the disks didn't even have a partition table!? None
of the disks had a MD superblock!
I wasn't really scared, I knew I haven't tried to modify the disks.
Put everything back into the PPC, and yes, everything works as
expected (exept the read errors from sdc/md1).
So, long winded explanation of what i've done, any idea about:
1. How do I remove md1/sdc before I get data on it (i have the
LVM unmounted for the time being).
2. How do I move a VG/PV/LV from PPC to x86?
I.e., how do I fix/solve/get around the problem with endianness
so I can move the disks between the machines?
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.1 (GNU/Linux)
Comment: Processed by Mailcrypt 3.5.8 <http://mailcrypt.sourceforge.net/>
iD8DBQFGhCHomlWzPKccHgARApC7AJ9eFBMpNObARyIiFptbwChKCWzaXACfSr6z
m6k0jAvBS0PtC/1Is8OWTvk=
=qrJb
-----END PGP SIGNATURE-----
-
