* Michael S. Tsirkin <mst@mellanox.co.il> wrote:

quoted text
> > (Resume is very slow, because disks are not spinned up properly; and
> > there's something wrong with timers; console beeps take way too long).

quoted text
> Pavel, I tried with your .config, and indeed the system came back to 
> life after 2-3 minutes after I press Fn/F4, indeed the issue seems to 
> be with the disk. It could be that the same takes place with my 
> original .config - maybe I just wasn't patient enough. I'll need to 
> re-test that.

the spin-up takes a few seconds here under suspend/resume simulation:

 | ata1: waiting for device to spin up (7 secs)
 | Restarting tasks ... done.

 [5-10 seconds pass]

 | ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
 | ata1.00: configured for UDMA/100
 | SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
 | sda: Write Protect is off
 | sda: Mode Sense: 00 3a 00 00
 | SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA

with real resume it takes even longer time - but i dont see where the 
delays come from in that case - i suspect it's SATA.

i'm also getting this WARN_ON() from e1000:

BUG: at drivers/pci/msi.c:611 pci_enable_msi()
 [<c01061bd>] show_trace_log_lvl+0x19/0x2e
 [<c01062b6>] show_trace+0x12/0x14
 [<c01062cc>] dump_stack+0x14/0x16
 [<c024fcc4>] pci_enable_msi+0x6d/0x203
 [<c02b709e>] e1000_request_irq+0x2e/0xe2
 [<c02bb742>] e1000_resume+0x7f/0xef
 [<c0249a68>] pci_device_resume+0x1a/0x44
 [<c02b39ec>] resume_device+0xf7/0x16f
 [<c02b3adb>] dpm_resume+0x77/0xcb
 [<c02b3b69>] device_resume+0x3a/0x51
 [<c014e669>] enter_state+0x193/0x1bb
 [<c014e712>] state_store+0x81/0x97
 [<c01b68bc>] subsys_attr_store+0x20/0x25
 [<c01b6feb>] sysfs_write_file+0xce/0xf6
 [<c017e16b>] vfs_write+0xb1/0x13a
 [<c017e899>] sys_write+0x3d/0x61
 [<c0105220>] syscall_call+0x7/0xb

seems harmless because it seems to work fine.

	Ingo
-
unsubscribe notice
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/