Cc: Paul Rolland <rol@...>, David Newall <david@...>, H. Peter Anvin <hpa@...>, Krzysztof Halasa <khc@...>, Pavel Machek <pavel@...>, Andi Kleen <andi@...>, Alan Cox <alan@...>, <linux-kernel@...>, Thomas Gleixner <tglx@...>, Ingo Molnar <mingo@...>, <rol@...>
As the person who started this thread, I'm still puzzled by two things:
1) is there anyone out there who wrote one of these drivers (most listed
below, from a list of those I needed to patch to eliminate refs to _b
calls) or arch specific code (also listed below), who might know why the
_p macros are actually needed (for any platform)?
Note that many of the devices are not on the ISA/LPC bus now, even if
they were, and the vga has never needed a bus-level pause since the
original IBM PC existed. (it did need a sync with retrace, but that's
another story).
2) Why are opterons and so forth so slow on out's to x80 as the
measurements show? That seems to me like there is a hidden bus timeout
going on. I'm still trying to figure out what is happening on my
machine which hangs when not in legacy mode (i.e. in ACPI mode) after a
lot of out's to x80. Perhaps the bus timeout handling is the issue.
I do remind all that 0x80 is a BIOS-specific standard, and is per BIOS -
other ports have been used in the history of the IBM PC family by some
vendors, and some machines have used it for DMA port mapping!! And
Windows XP does NOT use it at all. Therefore it may not be supported by
vendors, and may in fact be used for other purposes, since it can if the
BIOS doesn't use it.
I have a simple patch that fixes my primary concern - just change the
CMOS_READ and CMOS_WRITE, 64-bit versions of I/O and bootcode vga
accesses (first group below) to use the straight inb and outb code.
I may submit it so that the many others who share my pain will be made
happy - at least on modern _64 x86 machines those instructions don't
need the _p feature. The rest of the drivers and code are just lurking
disasters, which I hope can be resolved somehow by the community
figuring out what the timing delays were put there for...
-------------
arch/x86/boot/compressed/misc_64.c
arch/x86/kernel/i8259_64.c
arch/x86/pci/irq.c
include/asm/floppy.h
include/asm/io_64.h
include/asm/mc146818rtc_64.h
include/asm/vga.h
include/video/vga.h
drivers/video/console/vgacon.c
drivers/video/vesafb.c
drivers/video/vga16fb.c
drivers/acpi/processor_idle.c
drivers/bluetooth/bluecard_cs.c
drivers/char/pc8736x_gpio.c
drivers/char/rocket_int.h
drivers/hwmon/abituguru.c
drivers/hwmon/abituguru3.c
drivers/hwmon/it87.c
drivers/hwmon/lm78.c
drivers/hwmon/pc87360.c
drivers/hwmon/sis5595.c
drivers/hwmon/smsc47b397.c
drivers/hwmon/smsc47m1.c
drivers/hwmon/via686a.c
drivers/hwmon/vt8231.c
drivers/hwmon/w83627ehf.c
drivers/hwmon/w83627hf.c
drivers/hwmon/w83781d.c
drivers/i2c/busses/i2c-amd756.c
drivers/i2c/busses/i2c-i801.c
drivers/i2c/busses/i2c-nforce2.c
drivers/i2c/busses/i2c-viapro.c
drivers/input/misc/pcspkr.c
drivers/isdn/hisax/elsa_ser.c
drivers/isdn/hisax/s0box.c
drivers/misc/sony-laptop.c
drivers/net/8390.h
drivers/net/de600.c
drivers/net/de600.h
drivers/net/irda/nsc-ircc.c
drivers/net/irda/w83977af_ir.c
drivers/net/pcmcia/axnet_cs.c
drivers/net/pcmcia/pcnet_cs.c
drivers/net/wireless/wl3501_cs.c
drivers/scsi/megaraid.c
drivers/scsi/megaraid.h
drivers/scsi/ppa.h
drivers/serial/8250.c
drivers/video/console/vgacon.c
drivers/video/vesafb.c
drivers/video/vga16fb.c
drivers/watchdog/pcwd_pci.c
drivers/watchdog/w83627hf_wdt.c
drivers/watchdog/w83697hf_wdt.c
drivers/watchdog/w83877f_wdt.c
drivers/watchdog/w83977f_wdt.c
drivers/watchdog/wdt_pci.c
--
