Denys wrote:
quoted text
> Finally i got full DMESG with 1GB card till end. Seems not readable too.
> 

..


quoted text
> ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
> ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in
>          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
> ata1.00: status: { DRDY }
> ata1: soft resetting link
> ata1.00: configured for MWDMA1
> sd 0:0:0:0: [sda] Result: hostbyte=0x00 driverbyte=0x08
> sd 0:0:0:0: [sda] Sense Key : 0xb [current] [descriptor]
> Descriptor sense data with sense descriptors (in hex):
>         72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
>         00 00 00 00
> sd 0:0:0:0: [sda] ASC=0x0 ASCQ=0x0
> end_request: I/O error, dev sda, sector 0
> Buffer I/O error on device sda, logical block 0
> ata1: EH complete

I'm guessing that your CF-to-IDE adapter doesn't have the correct lines 
wired up for DMA to work properly, and the card indicates DMA support, 
which libata tries to use but which doesn't work. It looks like it never 
tried falling back to PIO after DMA failed. Seems like a deficiency in 
the speed-down logic?

-- 
Robert Hancock      Saskatoon, SK, Canada
To email, remove "nospam" from hancockr@nospamshaw.ca
Home Page: http://www.roberthancock.com/

-
unsubscribe notice
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/