Hello Jeff,

Yes it is. I'll keep testing with previous kernels.

Dmesg does look different with 2.6.23 vs 2.6.24-rc2

This is 2.6.23 :

scsi8 : pata_jmicron
scsi9 : pata_jmicron
ata9: PATA max UDMA/100 cmd 0x000000000001c000 ctl 0x000000000001c102 bmdma 0x000000000001c400 irq 17
ata10: PATA max UDMA/100 cmd 0x000000000001c200 ctl 0x000000000001c302 bmdma 0x000000000001c408 irq 17
ata9.00: ATAPI: BENQ    DVD DD DW1640, BSRB, max UDMA/33
ata9.00: configured for UDMA/33
ata9: EH pending after completion, repeating EH (cnt=4)
scsi 8:0:0:0: CD-ROM            BENQ     DVD DD DW1640    BSRB PQ: 0 ANSI: 5


This is 2.6.24-rc2 :

scsi8 : pata_jmicron
scsi9 : pata_jmicron
ata9: PATA max UDMA/100 cmd 0xc000 ctl 0xc100 bmdma 0xc400 irq 17
ata10: PATA max UDMA/100 cmd 0xc200 ctl 0xc300 bmdma 0xc408 irq 17
ata9.00: ATAPI: BENQ DVD DD DW1640, BSRB, max UDMA/33
ata9.00: configured for UDMA/33
scsi 8:0:0:0: CD-ROM BENQ DVD DD DW1640 BSRB PQ: 0 ANSI: 5

Regards,

Will Trives

On Sat, 2007-11-10 at 18:35 -0500, Jeff Garzik wrote:
quoted text
> Will Trives wrote:
> > Hello,
> > 
> > Motherboard: Gigabyte GA-P35-DS4 (rev. 1.1)
> > Chipset: Intel P35 + ICH9R 
> > PATA port runs off JMicron controller
> > CD/DVD Device: BENQ DW1640 16X
> > 
> > I cannot access my dvd burner under 2.6.24-rc2, I have no problems under
> > 2.6.23. Basically the drive is detected OK, everything looks ok but as
> > soon as I go to use it errors like this occur:
> 
> Is 2.6.24-rc1 also broken?
> 
> 	Jeff
> 
> 

-
unsubscribe notice
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/