Bernd Strieder wrote:
quoted text
> Hello,
> 
> please CC me, I'm not subscribed.
> 
> If any kernel developer is interested in more specific information 
> please mail me, I can build kernels, I can apply patches, though 
> have not done it regularly.
> 
> I'd like to get the DVD drive working somehow. I have googled a lot 
> and did not find any more ideas what to do. Some good keywords to 
> find a solution would suffice at that end.
> 
> Rough problem description:
> 
> I have a Tyan mainboard with NVIDIA chipset CK804. The only 
> SATA/IDE device is a SATA DVD combo, the harddisks are on a RAID 
> controller from 3ware. The harddisks are fine.
> 
> The openSuSE 10.3 boot dvds fail after booting from the BIOS, the 
> installation kernel cannot use the DVD drive. That kernel uses 
> libata and sata_nv pata_amd as drivers. The drive is recognized 
> but it cannot be used. This is the situation probably during 
> install from DVD and now in the running system after a network 
> install it persists.
> 
> Reading from the dvd device /dev/sr0 with dd stops after at most 
> 119kb of rubbish read. Mounting fails with superblock not found.
> When trying to remove the pata_amd module I get an Oops. I tried to 
> remove the modules to have a chance to reload them with other 
> options (atapi_enable), but that did not help, even after 
> rebooting.
> 
> A vanilla 2.6.23.1 kernel behaves even less friendly, the dd 
> on /dev/sr0 causes a hard reset.
> 
> So there are clearly some problems with libata in this system.
> 
> I have failed switching away from libata getting the drive to be 
> recognized at all.

There is a known problem with ATAPI devices on CK804 chipsets which have 
memory above the 4GB mark, being debugged here:

https://bugzilla.redhat.com/show_bug.cgi?id=351451

If you are running into that one you can workaround it for now by 
passing the adma=0 parameter to the sata_nv module (not sure how this 
would be done on Suse's setup) or pass sata_nv.adma=0 on the kernel 
command line if sata_nv is built into the kernel. If that does help, I 
could ask you to test patches :-)

-- 
Robert Hancock      Saskatoon, SK, Canada
To email, remove "nospam" from hancockr@nospamshaw.ca
Home Page: http://www.roberthancock.com/

-
unsubscribe notice
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/