Lennart Sorensen wrote:
quoted text
> On Fri, Oct 05, 2007 at 05:31:05PM -0400, Chris Bergeron wrote:
>   
>> I've just installed a multiport serial card released by an outfit called 
>> Syba.  This is an 8 port serial-only card with an Octopus style breakout 
>> cable.  The main chipset on it is an ITE IT8871F.
>>     
>
> Well 8250_pci.c mentions IT8871, so it is probably 8250 style in
> interface then.
>
>   
That's what I had thought too after a quick LKML search.  Doing a bit 
more research (I'm starting to think the IT8871F on the chip is 
misleading) it looks like that support is for a single parallel multi 
I/O card (with the other 887x cards being serial/parport PCI cards).

quoted text
>> I've got two questions on this: Is there a driver I should try force 
>> loading on it (and if so, what options to use)?  and is there any useful 
>> testing I can do to report back to the LKML on this card?
>>     
>
> How many serial ports is your kernel configured to use?
>   
The kernel I'm using has 16 for both the NR_UARTS and RUNTIME_UARTS 
(these machines generally have a minimum of 4 ports).  dmesg doesn't 
show the kernel as recognizing the card and only ttyS0 and ttyS1 (the 
two onboard ports) show up on boot.

-- Chris
-
unsubscribe notice
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/