From: Francesco Sacchi <batt@develer.com>
Reading serial port status lines was broken on the FT232RL since when it
has been detected as a separate chip (2.6.22+). Previously, it would work
because it was just handled as an FT232BM.
Additionally, we were also forgetting to remove the dev_attr_latency_timer
sysfs file in the FT232RL case.
Note by Bernardo Innocenti: the ftdi_sio maintainer appears to have stepped
down, so I'm sending this to Greg Kroah-Hartman as the generic USB serial
maintainer. Please, let me know if this is not appropriate.
Signed-Off-By: Francesco Sacchi <batt@develer.com>
Signed-Off-By: Bernardo Innocenti <bernie@codewiz.org>
---
drivers/usb/serial/ftdi_sio.c | 7 +++++--
1 files changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 2d04585..940b0c4 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -892,7 +892,7 @@ static __u32 get_ftdi_divisor(struct usb_serial_port * port)
break;
case FT232BM: /* FT232BM chip */
case FT2232C: /* FT2232C chip */
- case FT232RL:
+ case FT232RL: /* FT232RL chip */
if (baud <= 3000000) {
div_value = ftdi_232bm_baud_to_divisor(baud);
} else {
@@ -1169,7 +1169,9 @@ static void remove_sysfs_attrs(struct usb_serial_port *port)
/* XXX see create_sysfs_attrs */
if (priv->chip_type != SIO) {
device_remove_file(&port->dev, &dev_attr_event_char);
- if (priv->chip_type == FT232BM || priv->chip_type == FT2232C) {
+ if (priv->chip_type == FT232BM ||
+ priv->chip_type == FT2232C ||
+ priv->chip_type == FT232RL) {
device_remove_file(&port->dev, &dev_attr_latency_timer);
}
}
@@ -2102,6 +2104,7 @@ static int ftdi_tiocmget (struct usb_serial_port *port, struct file *file)
case FT8U232AM:
case FT232BM:
case FT2232C:
+ case FT232RL:
/* the 8U232AM returns a two byte value (the sio is a 1 byte value) - in the ...
