On Friday 26 October 2007, Alexey Starikovskiy wrote:
quoted text > Andrey Borzenkov wrote:
> > On Friday 26 October 2007, Alexey Starikovskiy wrote:
> >> Andrey Borzenkov wrote:
> >>> I have lost battery in 2.6.24-rc1. Without CONFIG_ACPI_PROCFS I have
> >>> no /proc/acpi/battery and cannot test netlink interface because right
> >>> now there is no consumer of this.
> >>
> >> for /sysfs interface you need to enable power_supply driver.
> >> or you could apply this patch and power_supply will be selected by
> >> battery itself.
> >
> > I already have power_supply module, battery depends on it and it is
> > autloaded. But I fail to see where I can get battery info in /sys
>
> Intent was to put into /sysfs same information:
> aystarik@samsung:~/client_conf$ ls /sys/class/power_supply/BAT1/
> alarm charge_full charge_full_design charge_now current_now device=20
> manufacturer model_name present status subsystem technology type=20
> uevent voltage_min_design voltage_now
>
is it in -rc1 or can you point me to the patch (I'd rather avoid having to=
=20
pull from different git trees). Thank you.
And what about ACPI_PROCFS case? It still needs attention I believe.
quoted text > aystarik@samsung:~/client_conf$ cat /sys/class/power_supply/BAT1/*
> 0
> 4172000
> 4300000
> 4172000
> 0
> cat: /sys/class/power_supply/BAT1/device: Is a directory
> Pacifi
> Bat1
> 1
> Full
> cat: /sys/class/power_supply/BAT1/subsystem: Is a directory
> Li-ion
> Battery
> PHYSDEVPATH=3D/devices/LNXSYSTM:00/device:00/PNP0C0A:00
> PHYSDEVBUS=3Dacpi
> PHYSDEVDRIVER=3Dbattery
> POWER_SUPPLY_NAME=3DBAT1
> POWER_SUPPLY_TYPE=3DBattery
> POWER_SUPPLY_STATUS=3DFull
> POWER_SUPPLY_PRESENT=3D1
> POWER_SUPPLY_TECHNOLOGY=3DLi-ion
> POWER_SUPPLY_VOLTAGE_MIN_DESIGN=3D14800000
> POWER_SUPPLY_VOLTAGE_NOW=3D16522000
> POWER_SUPPLY_CURRENT_NOW=3D0
> POWER_SUPPLY_CHARGE_FULL_DESIGN=3D4300000
> POWER_SUPPLY_CHARGE_FULL=3D4172000
> POWER_SUPPLY_CHARGE_NOW=3D4172000
> POWER_SUPPLY_MODEL_NAME=3DBat1
> POWER_SUPPLY_MANUFACTURER=3DPacifi
> 14800000
> 16522000
>
> aystarik@samsung:~/client_conf$ cat /proc/acpi/battery/BAT1/*
> alarm: unsupported
> present: yes
> design capacity: 4300 mAh
> last full capacity: 4172 mAh
> battery technology: rechargeable
> design voltage: 14800 mV
> design capacity warning: 208 mAh
> design capacity low: 41 mAh
> capacity granularity 1: 41 mAh
> capacity granularity 2: 41 mAh
> model number: Bat1
> serial number: 001
> battery type: LION
> OEM info: Pacifi
> present: yes
> capacity state: ok
> charging state: charged
> present rate: 0 mA
> remaining capacity: 4172 mAh
> present voltage: 16518 mV
