[patch] portman2x4.c: fix boot hang

!MAILaRCHIVE_VOTE_RePLACE
Previous message: [thread] [date] [author]
Next message: [thread] [date] [author]
To: <linux-kernel@...>
Cc: Takashi Iwai <tiwai@...>, Jaroslav Kysela <perex@...>, Linus Torvalds <torvalds@...>
Date: Wednesday, October 24, 2007 - 3:44 pm

Subject: portman2x4.c: fix boot hang
From: Ingo Molnar <mingo@elte.hu>

when booting an allyesconfig bzImage kernel the bootup hangs in the 
portman2x4 driver (on a box that does not have this hardware), at:

 Pid: 1, comm:              swapper
 EIP: 0060:[<c02f763c>] CPU: 0
 EIP is at parport_pc_read_status+0x4/0x8
  EFLAGS: 00000202    Not tainted  (2.6.23-rc9 #904)
 EAX: f7e57a7f EBX: 00000010 ECX: c2b808c0 EDX: 00000379
 ESI: f7cb8230 EDI: 00000010 EBP: f7cb8230 DS: 007b ES: 007b FS: 0000
 CR0: 8005003b CR2: fff9c000 CR3: 007ec000 CR4: 00000690
 DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
 DR6: ffff0ff0 DR7: 00000400
  [<c04613de>] portman_flush_input+0xde/0x12c
  [<c0461a24>] snd_portman_probe+0x368/0x484
  [<c02fbb8c>] __device_attach+0x0/0x8
  [<c02fce68>] platform_drv_probe+0xc/0x10
  [<c02fba6c>] driver_probe_device+0x74/0x194
  [<c0587174>] klist_next+0x38/0x70
  [<c02fbb8c>] __device_attach+0x0/0x8
  [<c02faea1>] bus_for_each_drv+0x35/0x68
  [<c02fbc22>] device_attach+0x72/0x78

the reason is due to an inconsistent error return code of 1 or 2, while 
snd_portman_probe only realizes negative error codes.

with this fixed the probe fails as it should and the bootup continues.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 sound/drivers/portman2x4.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

Index: linux/sound/drivers/portman2x4.c
===================================================================
--- linux.orig/sound/drivers/portman2x4.c
+++ linux/sound/drivers/portman2x4.c
@@ -467,7 +467,7 @@ static int portman_probe(struct parport 
 	/* Check for ESTB to be clear */
 	/* 4 */
 	if ((parport_read_status(p) & ESTB) == ESTB)
-		return 1;	/* CODE 1 - Strobe Failure. */
+		return -EIO;	/* CODE 1 - Strobe Failure. */
 
 	/* Set for RXDATA0 where no damage will be done. */
 	/* 5 */
@@ -475,7 +475,7 @@ static int portman_probe(struct parport 
 
 	/* 6 */
 	if ((parport_read_status(p) & ESTB) != ESTB)
-		return 1;	/* CODE 1 - Strobe Failure. */
+		return -EIO;	/* CODE 1 - Strobe Failure. */
 
 	/* 7 */
 	parport_write_control(p, 0);	/* Reset Strobe=0. */
@@ -491,7 +491,7 @@ static int portman_probe(struct parport 
 	 */
 	/* 9 */
 	if ((parport_read_status(p) & TXEMPTY) == 0)
-		return 2;
+		return -EIO;
 
 	/* Return OK status. */
 	return 0;

-
Previous message: [thread] [date] [author]
Next message: [thread] [date] [author]

Messages in current thread:
Linux v2.6.24-rc1, Linus Torvalds, (Wed Oct 24, 12:19 am)
Re: Linux v2.6.24-rc1, , (Thu Oct 25, 8:45 am)
2.6.24-rc1 doesn't build..., Theodore Tso, (Thu Oct 25, 1:18 am)
Re: 2.6.24-rc1 doesn't build..., Kamalesh Babulal, (Thu Oct 25, 1:30 am)
[patch] portman2x4.c: fix boot hang, Ingo Molnar, (Wed Oct 24, 3:44 pm)
Re: [patch] portman2x4.c: fix boot hang, Takashi Iwai, (Thu Oct 25, 4:16 am)
Re: [patch] portman2x4.c: fix boot hang, Frans Pop, (Wed Oct 24, 4:12 pm)
Re: [patch] portman2x4.c: fix boot hang, Ingo Molnar, (Wed Oct 24, 5:29 pm)
Re: Linux v2.6.24-rc1, Giacomo Catenazzi, (Wed Oct 24, 2:19 pm)
Re: [Bug 9246] On 2.6.24-rc1-gc9927c2b BUG: unable to handle..., Giacomo A. Catenazzi, (Tue Dec 4, 12:47 pm)
Re: [Bug 9246] On 2.6.24-rc1-gc9927c2b BUG: unable to handle..., Giacomo A. Catenazzi, (Wed Dec 5, 5:26 am)
2.6.24-rc1 fails with lockup and BUG:, Romano Giannetti, (Wed Oct 24, 9:25 am)
Re: 2.6.24-rc1 fails with lockup and BUG:, Joseph Fannin, (Wed Oct 24, 12:44 pm)
Re: 2.6.24-rc1 fails with lockup and BUG:, Romano Giannetti, (Fri Oct 26, 1:59 am)
Re: 2.6.24-rc1 fails with lockup and BUG:, Ingo Molnar, (Wed Oct 24, 10:27 am)
Re: 2.6.24-rc1 fails with lockup and BUG:, Romano Giannetti, (Wed Oct 24, 11:53 am)
Re: 2.6.24-rc1 fails with lockup and BUG:, Ingo Molnar, (Wed Oct 24, 11:55 am)
Re: 2.6.24-rc1 fails with lockup and BUG:, Peter Zijlstra, (Wed Oct 24, 12:11 pm)
Re: 2.6.24-rc1 fails with lockup and BUG:, Romano Giannetti, (Fri Oct 26, 1:57 am)
Re: 2.6.24-rc1 fails with lockup - /sbin/ifconfig / inet_ioc..., Stephen Hemminger, (Fri Oct 26, 12:48 pm)
[PATCH] r8169: don't call napi_disable if not doing NAPI, Stephen Hemminger, (Fri Oct 26, 2:33 pm)
Re: [PATCH] r8169: don't call napi_disable if not doing NAPI, Romano Giannetti, (Mon Oct 29, 4:56 am)
Re: [PATCH] r8169: don't call napi_disable if not doing NAPI, Romano Giannetti, (Sun Oct 28, 6:18 pm)
Re: [PATCH] r8169: don't call napi_disable if not doing NAPI, Francois Romieu, (Fri Oct 26, 4:17 pm)
[git pull] x86 arch updates, Ingo Molnar, (Wed Oct 24, 7:30 am)
Re: [git pull] x86 arch updates, Jeff Garzik, (Wed Oct 24, 7:48 am)
Re: [git pull] x86 arch updates, Ingo Molnar, (Wed Oct 24, 8:03 am)
Re: Linux v2.6.24-rc1, Christoph Hellwig, (Wed Oct 24, 4:04 am)
Re: Linux v2.6.24-rc1, Sam Ravnborg, (Wed Oct 24, 7:07 am)
Re: Linux v2.6.24-rc1, Ingo Molnar, (Wed Oct 24, 8:12 am)
Re: Linux v2.6.24-rc1, Sam Ravnborg, (Wed Oct 24, 8:21 am)
Re: Linux v2.6.24-rc1, Ingo Molnar, (Wed Oct 24, 4:04 am)
Re: Linux v2.6.24-rc1, Dave Young, (Wed Oct 24, 1:22 am)
Re: Linux v2.6.24-rc1, Ingo Molnar, (Wed Oct 24, 3:23 am)
Re: Linux v2.6.24-rc1, Jens Axboe, (Wed Oct 24, 4:12 am)
Re: Linux v2.6.24-rc1, Dave Young, (Wed Oct 24, 3:33 am)
Re: Linux v2.6.24-rc1, Ohad Ben-Cohen, (Wed Oct 24, 3:32 am)
Re: Linux v2.6.24-rc1, Willy Tarreau, (Wed Oct 24, 12:49 am)