Jonathan McDowell wrote:
quoted text > This patch adds bluetooth support to the toshiba-acpi driver. I have
> tried to follow the same format for the /proc/acpi/toshiba/bluetooth
> file as followed in the thinkpad-acpi driver. In the long term the
> rfkill infrastructure looks like the way forward for this functionality,
> but at present it doesn't seem to be suitable.
>
Would it be possible (make sense) to add config option for that? There are
probably a bunch of older models out there that do not have BT at all (I am
owner of such one).
Thank you
-andrey
quoted text > Traditionally the userland "toshset" program would have been used to
> enable bluetooth, but this requires either CONFIG_TOSHIBA or a patched
> toshiba-acpi to emulate the /dev/toshiba device. Also toshset doesn't
> currently run in 64bit mode.
>
> Patch has been successfully tested on a Portégé R200 (in 32bit mode) and
> an R500 (in 64bit mode).
>
> Signed-Off-By: Jonathan McDowell <noodles@earth.li>
>
> -----
> --- drivers/acpi/toshiba_acpi.c.orig 2007-10-21 18:29:01.000000000 +0100
> +++ drivers/acpi/toshiba_acpi.c 2007-10-21 18:15:34.000000000 +0100
> @@ -33,7 +33,7 @@
> *
> */
>
> -#define TOSHIBA_ACPI_VERSION "0.18"
> +#define TOSHIBA_ACPI_VERSION "0.19"
> #define PROC_INTERFACE_VERSION 1
>
> #include <linux/kernel.h>
> @@ -55,6 +55,7 @@ MODULE_LICENSE("GPL");
> #define MY_ERR KERN_ERR MY_LOGPREFIX
> #define MY_NOTICE KERN_NOTICE MY_LOGPREFIX
> #define MY_INFO KERN_INFO MY_LOGPREFIX
> +#define strlencmp(a,b) (strncmp((a), (b), strlen(b)))
>
> /* Toshiba ACPI method paths */
> #define METHOD_LCD_BRIGHTNESS "\_SB_.PCI0.VGA_.LCD_._BCM"
> @@ -90,6 +91,7 @@ MODULE_LICENSE("GPL");
> #define HCI_VIDEO_OUT 0x001c
> #define HCI_HOTKEY_EVENT 0x001e
> #define HCI_LCD_BRIGHTNESS 0x002a
> +#define HCI_BLUETOOTH 0x0056
>
> /* field definitions */
> #define HCI_LCD_BRIGHTNESS_BITS 3
> @@ -482,6 +484,129 @@ static unsigned long write_keys(const ch
> return count;
> }
>
> +static int toshiba_bluetooth_present(void)
> +{
> + u32 hci_result;
> + u32 value;
> +
> + hci_read1(HCI_BLUETOOTH, &value, &hci_result);
> + if (hci_result == HCI_SUCCESS) {
> + return (value & 0x0f) == 0x0f;
> + } else
> + return -EFAULT;
> +}
> +
> +static int toshiba_bluetooth_get(void)
> +{
> + u32 in[HCI_WORDS];
> + u32 out[HCI_WORDS];
> + acpi_status status;
> +
> + in[0] = HCI_GET;
> + in[1] = HCI_BLUETOOTH;
> + in[2] = 0;
> + in[3] = 1;
> + status = hci_raw(in, out);
> + if (status != AE_OK) {
> + printk(MY_ERR "Error checking Bluetooth device status.\n");
> + return -EIO;
> + }
> +
> + /* 0x1 == switch on, 0x40 == attached, 0x80 == power on */
> + return (out[2] & 0xC1) == 0xC1;
> +}
> +
> +static int toshiba_bluetooth_set(int state)
> +{
> + u32 in[HCI_WORDS];
> + u32 out[HCI_WORDS];
> + acpi_status status;
> +
> + switch (state) {
> + case 0:
> + in[0] = HCI_SET;
> + in[1] = HCI_BLUETOOTH;
> + in[2] = 0;
> + in[3] = 0x40;
> + status = hci_raw(in, out);
> + if (status != AE_OK) {
> + printk(MY_ERR "Error detaching Bluetooth device.\n");
> + return -EIO;
> + }
> +
> + in[0] = HCI_SET;
> + in[1] = HCI_BLUETOOTH;
> + in[2] = 0;
> + in[3] = 0x80;
> + status = hci_raw(in, out);
> + if (status != AE_OK) {
> + printk(MY_ERR "Error deactivating Bluetooth device.\n");
> + return -EIO;
> + }
> + break;
> + case 1:
> + in[0] = HCI_SET;
> + in[1] = HCI_BLUETOOTH;
> + in[2] = 1;
> + in[3] = 0x80;
> + status = hci_raw(in, out);
> + if (status != AE_OK) {
> + printk(MY_ERR "Error activating Bluetooth device.\n");
> + return -EIO;
> + }
> +
> + in[0] = HCI_SET;
> + in[1] = HCI_BLUETOOTH;
> + in[2] = 1;
> + in[3] = 0x40;
> + status = hci_raw(in, out);
> + if (status != AE_OK) {
> + printk(MY_ERR "Error attaching Bluetooth device.\n");
> + return -EIO;
> + }
> + break;
> + default:
> + printk(MY_ERR "Unknown state for Bluetooth.\n");
> + };
> +
> + return 0;
> +}
> +
> +static char *read_bluetooth(char *p)
> +{
> + int value = toshiba_bluetooth_get();
> +
> + if (!toshiba_bluetooth_present()) {
> + p += sprintf(p, "status:\t\tnot supported\n");
> + } else if (value >= 0) {
> + p += sprintf(p, "status:\t\t%s\n",
> + value ? "enabled" : "disabled");
> + p += sprintf(p, "commands:\tenable, disable\n");
> + } else {
> + printk(MY_ERR "Error reading bluetooth status.\n");
> + }
> +
> + return p;
> +}
> +
> +static unsigned long write_bluetooth(const char *buffer, unsigned long
> count) +{
> + int ret ;
> +
> + if (!toshiba_bluetooth_present()) {
> + ret = -ENODEV;
> + } else if (strlencmp(buffer, "enable") == 0) {
> + toshiba_bluetooth_set(1);
> + ret = count;
> + } else if (strlencmp(buffer, "disable") == 0) {
> + toshiba_bluetooth_set(0);
> + ret = count;
> + } else {
> + ret = -EINVAL;
> + }
> + return ret;
> +}
> +
> static char *read_version(char *p)
> {
> p += sprintf(p, "driver: %s\n", TOSHIBA_ACPI_VERSION);
> @@ -496,6 +621,7 @@ static char *read_version(char *p)
> #define PROC_TOSHIBA "toshiba"
>
> static ProcItem proc_items[] = {
> + {"bluetooth", read_bluetooth, write_bluetooth},
> {"lcd", read_lcd, write_lcd},
> {"video", read_video, write_video},
> {"fan", read_fan, write_fan},
> -----
>
> J.
>
-
unsubscribe notice To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to
majordomo@vger.kernel.org
More majordomo info at
http://vger.kernel.org/majordomo-info.html
Please read the FAQ at
http://www.tux.org/lkml/ Messages in current thread:
Re: [PATCH] Add bluetooth support to toshiba-acpi driver , Andrey Borzenkov , (Sun Oct 21, 7:30 pm)
