Helo,

Soeren Sonnenburg wrote:
quoted text
> I finally managed to find a *reproducible* setup and way to trigger
> random corruptions using a sata sil 3114 controller connected to 4
> seagate drives
> 
> port 1: ST3400832AS sda
> port 2: ST3400620AS sdb
> port 3: ST3750640AS sdc
> port 4: ST3750640AS sdd
> 
> sda & sdb form md0 via a raid1 setup followed by an additional
> devicemapper layer ( root ). sdc and sdb are separate and also have an
> additional device mapper layer ( public ) and ( backups ).
> 
> Now when I write large files of zeros to root(sda&sdb) and read the file
> back in it contains a few nonzero entries:
> 
> # dd if=/dev/zero of=/foo bs=1M count=2000
> # hexdump /foo
> 0000000 0000 0000 0000 0000 0000 0000 0000 0000
> *
> <after >1GB random parts, within large blocks of zeroes> 
> 
> I can reliably trigger this on the md0 / devmapper-root setup when I
> write about 2GB of data (note that this machine has 1.5G of memory - and
> still 1GB is often enough to see this problem). Here it does not matter
> where in the filesystem I do these writes.

Thanks.  I'll try to reproduce the problem here.  What's your motherboard?

quoted text
> Now promise_sata is converted to new EH, so I simply gave it a go, i.e.
> I attached ST3400832AS and ST3400620AS to the promise controller and
> rebooted and redid the experiments from above.
> 
> No data corruptions whatsoever. I even ran the dd on all three devmapped
> mount points simultaneously with a size of 30GB each, still no
> corruption. However the error messages I've seen a year ago are back for
> the ST3400832AS and ST3400620AS attached to the promise controller (see
> below).
[--snip--]
quoted text
> ata1.00: exception Emask 0x10 SAct 0x0 SErr 0x100 action 0x2
> ata1.00: port_status 0x20200000
> ata1.00: cmd 25/00:00:c0:b6:74/00:01:20:00:00/e0 tag 0 cdb 0x0 data 131072 in
>          res 51/0c:00:c0:b6:74/0c:01:20:00:00/e0 Emask 0x10 (ATA bus error)
> ata1: soft resetting port

Yeah, still the same.  Your drives don't like the way promise controller
speaks to them (e.g. promise generates signals which are ) but now that
sata_promise has proper EH.  It can recover from those errors.  As long
as nothing worse happens, it should be okay.

Thanks.

-- 
tejun
-
unsubscribe notice
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/