> peer chen wrote:
> > I hope one of the following patches can be merged to 2.6.24.
> > ==========================
> >
http://lkml.org/lkml/2007/10/8/93
> >
http://lkml.org/lkml/2007/9/25/20
>
> Unfortunately I do not feel like this is the right course of action.
>
> Experience from Intel platforms tells us that our users get very unhappy
> when their silicon supports AHCI mode, but they are forced into using a
> less-performant mode. A popular example is an <unnamed> OEM whose BIOS
> had no method whatsoever for enabling AHCI -- didn't even program the
> PCI BAR -- even though tests showed the AHCI mode worked just fine when
> manually programmed.
>
> AHCI is more likely to provide a /stable/ Serial ATA experience, because
> the silicon deals primarily with sending and receiving FIS's, and not
> much else. In constrast, experience has shown the legacy IDE interface
> to be a less reliable method of SATA support. And certainly AHCI is
> much, much faster with less per-command overhead.
>
> Given that AHCI is both faster and more stable, I feel it is the best
> policy to enable AHCI when the hardware supports it, regardless of PCI
> class code (IDE, SATA, or RAID).
>
>
> > Yes, I agree to set the 'swncq' as default for 2.6.24, after all, for
> > our server customers, stability is far more important than the new
> > feature no matter the problem is caused by drive or controller.
>
> Agreed. Done!
>
> Jeff
>
>
>
>
>
