I forgot attachment.

Rok

Rok Markovic wrote:
quoted text
> Hi
> 
> I enabled netconsole but I am affraid that it won't help. In attachment
> I am sending complete log over netconsole. While I was trying to make
> everything, I got a lockup on linux-2.6.23-rc8, but I am not sure into
> this. But all lockups happend in VGA console mode. Any ideas.
> 
> Rok
> 
> 
> Ingo Molnar wrote:
>>> I tried to recompile with those options enabled, kernel and linux 
>>> boots and loads fine, but after few minutes (if i try to recompile 
>>> kernel in console) the system locks completely (hard reset) without 
>>> any messages. Is there anything I can do, maybe console on serial 
>>> port? My new config is atached.
>> yes, serial console (or netconsole) output would be useful, if you can 
>> solve that. Another way would be to boot with nmi_watchdog=2, do the 
>> kernel recompile in a VGA text console, and wait for the lockup to 
>> occur. Either you get some crash message to the text console 
>> immediately, or you should get the NMI watchdog print something within a 
>> minute or so. If neither happens you just get a blank hard lockup then 
>> the wedge is very deep ...
>>
>> (also make sure that the NMI counter in /proc/interrupts is increasing 
>> on all CPUs properly, with nmi_watchdog=2. If not all CPUs/cores are 
>> increasing their NMI counters once per second then the NMI watchdog wont 
>> be able to print out a stackdump.)
>>
>> 	Ingo