CMD 64x regression from 2.6.21 to 2.6.22 and 2.6.23?

!MAILaRCHIVE_VOTE_RePLACE
Previous message: [thread] [date] [author]
Next message: [thread] [date] [author]
To: <linux-kernel@...>
Date: Thursday, October 11, 2007 - 7:46 pm

Hi guys,

it has been 12 years since I was last actively working on linux 68k. Anyway, 
this time I have a problem report on i386:

Background:
I upgraded one machine from 2.6.21.5 to 2.6.23 and experienced boot failure 
due to the IDE disks being inaccessible. I worked out that the problem was 
introduced with 2.6.22-rc1. The machine has an Asus CUBX motherboard. The 
PIIX3 is switched off in the BIOS. All disks are hanging off the onboard 
CMD648 IDE controller which is connected to IRQ 15.

Error description:
The kernel initializes normally, goes through init, into runlevel S. The 
following is printed on the screen (there is no log saved on disk for obvious 
reasons):

<normal kernel messages>
INIT: version 2.86 booting
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
Starting udevd: /sbin/udevd --daemon
Triggering udev events: /bin/udevtrigger
irg 15: nobody cared (try booting with the "irqpoll" option)
<call stack information>
Disabling IRQ #15
<endless loop printing /dev/hda & /dev/hdc lost interrupt, time out etc.>

When booting with the "irqpoll" option, the last line of output is "Triggering 
udev events: /bin/udevtrigger" after which the machine appears to hang (no 
disk activity, no reaction).

Attachments:
kernel configuration (of the 2.6.22-rc1 not working)
system configuration (taken under 2.6.21)
dmesg output (taken under 2.6.21)

Please let me know if you need further information or if you'd like me to try 
something. Also, please CC me on your reply. Thanks,

Martin
Previous message: [thread] [date] [author]
Next message: [thread] [date] [author]

Messages in current thread:
CMD 64x regression from 2.6.21 to 2.6.22 and 2.6.23?, Martin Rogge, (Thu Oct 11, 7:46 pm)