Andrey Panin wrote:
quoted text
> On 278, 10 05, 2007 at 05:31:05PM -0400, Chris Bergeron wrote:
>   
>> Hello all,
>>
>> I've just installed a multiport serial card released by an outfit called 
>> Syba.  This is an 8 port serial-only card with an Octopus style breakout 
>> cable.  The main chipset on it is an ITE IT8871F.
>>     
>
> Are you sure ? IIRC IT887x are PCI-ISA bridges with additional periphery
> and your lspci shows PLX chip. Can you send complete lspci -vv output ?
> Output of dmesg could be useful too.
>
>
>   
I'm sure that's what it says on the largest chip on the PCI card.  It 
could be that the other two chips are more relevant... the numbers from 
them are included below.

I've posted up a quick text only page with the diagnostic information 
from the system (full dmesg, lspci, etc) plus links to pictures of the 
board (since others might see something important that I'm not aware 
of).  You can access that at 
http://pcburn.com/files/Syba_serial_controller/index.html

One chip has "ITE IT8871F 0641-AYS ZF1M04L" written on it, and the other 
two have  a stylized celtic knot looking "T" followed by "TG16C554CJG 
FTA6M-001 0620-B".
-
unsubscribe notice
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/