Home » Mailing list archives » linux-kernel-newbies » 2008 » August » 18

Re: arm926ej-s -- toolchain recommendation

Previous thread: Patch against linux-next or linus tree? by Himanshu Chauhan on Sunday, August 17, 2008 - 8:52 am. (2 messages)

Next thread: Question regarding process creation by Sri Ram K Vemulpali on Sunday, August 17, 2008 - 9:44 pm. (2 messages)
[view original message]
From: Roman Mashak <romez777@...>
To: <kernelnewbies@...>
Subject: arm926ej-s -- toolchain recommendation
Date: Sunday, August 17, 2008 - 8:28 pm

Hello,


I'm looking for a pre-compiled toolchain for a ARM926EJ-S based

platform. Every sites I found are describing procedure to build

croostools rather then offer pre-built ones. Can you recommend binary

ready-to-use, Debian-based desireble?


Thanks.


--

Roman Mashak


--

To unsubscribe from this list: send an email with

"unsubscribe kernelnewbies" to ecartis@nl.linux.org

Please read the FAQ at http://kernelnewbies.org/FAQ
[view original message]
From: Om Narasimhan <om.turyx@...>
To: <kernelnewbies@...>
Subject: Re: arm926ej-s -- toolchain recommendation
Date: Sunday, August 24, 2008 - 7:12 pm

http://mirror.switch.ch/ftp/mirror/eldk/eldk/4.1/


has (2) ARM tool chains. libc and uclibc. Is any good for you?


Thanks,

Om.


--

To unsubscribe from this list: send an email with

"unsubscribe kernelnewbies" to ecartis@nl.linux.org

Please read the FAQ at http://kernelnewbies.org/FAQ
[view original message]
From: Roman Mashak <romez777@...>
To: Om Narasimhan <om.turyx@...>
Cc: <kernelnewbies@...>
Subject: Re: arm926ej-s -- toolchain recommendation
Date: Sunday, August 24, 2008 - 8:35 pm

Hello,


Thanks, will check on this.


--

Roman Mashak


--

To unsubscribe from this list: send an email with

"unsubscribe kernelnewbies" to ecartis@nl.linux.org

Please read the FAQ at http://kernelnewbies.org/FAQ
[view original message]
From: sahlot arvind <asahlot@...>
To: Roman Mashak <romez777@...>
Cc: Om Narasimhan <om.turyx@...>, <kernelnewbies@...>
Subject: Re: arm926ej-s -- toolchain recommendation
Date: Sunday, August 24, 2008 - 10:13 pm

try this -

http://www.codesourcery.com/gnu_toolchains/arm


Thanks


--

http://linuxexplained.blogspot.com
[view original message]
From: Shaz <shazalive@...>
To: sahlot arvind <asahlot@...>
Cc: Roman Mashak <romez777@...>, Om Narasimhan <om.turyx@...>, <kernelnewbies@...>
Subject: Re: arm926ej-s -- toolchain recommendation
Date: Tuesday, August 26, 2008 - 5:56 am

[Empty message]
[view original message]
From: Matthias Kaehlcke <matthias@...>
To: Roman Mashak <romez777@...>
Cc: <kernelnewbies@...>
Subject: Re: arm926ej-s -- toolchain recommendation
Date: Monday, August 18, 2008 - 5:11 am

i can't help with a toolchain specific to ARM926EJ-S, for a

Debian-based toolchains for several platforms you might want to have a

look at the toolchains of the emdebian project:

http://www.emdebian.org/toolchains/search.php


--

Matthias Kaehlcke

Embedded Linux Engineer

Barcelona


            You can chain me, you can torture me, you can even

          destroy this body, but you will never imprison my mind

                            (Mahatma Gandhi)

                                                                 .''`.

    using free software / Debian GNU/Linux | http://debian.org  : :'  :

                                                                `. `'`

gpg --keyserver pgp.mit.edu --recv-keys 47D8E5D4                  `-


--

To unsubscribe from this list: send an email with

"unsubscribe kernelnewbies" to ecartis@nl.linux.org

Please read the FAQ at http://kernelnewbies.org/FAQ
[view original message]
From: Rene Herman <rene.herman@...>
To: Roman Mashak <romez777@...>
Cc: <kernelnewbies@...>
Subject: Re: arm926ej-s -- toolchain recommendation
Date: Monday, August 18, 2008 - 4:57 am

Both the 926EJ-S and the Debian bit are too specific for me to know but

there's a prebuilt i386 -> arm crosscompiler in the repository at:


http://www.kernel.org/pub/tools/crosstool/


Maybe it helps.


Rene.


--

To unsubscribe from this list: send an email with

"unsubscribe kernelnewbies" to ecartis@nl.linux.org

Please read the FAQ at http://kernelnewbies.org/FAQ
[view original message]
From: Michael Spradling <mike@...>
To: Roman Mashak <romez777@...>
Cc: <kernelnewbies@...>
Subject: Re: arm926ej-s -- toolchain recommendation
Date: Sunday, August 17, 2008 - 8:55 pm

I only know of two toolchains.  The first is crosstools and there is a

page of prebuilt binary packages:

http://www.freaknet.org/martin/crosstool/packages/


The other one would be codesourcery:

http://www.codesourcery.com/gnu_toolchains/arm


I just thought I would mention them, didn't check to see if they work with

the ARM926.


--


--

Michael Spradling


--

To unsubscribe from this list: send an email with

"unsubscribe kernelnewbies" to ecartis@nl.linux.org

Please read the FAQ at http://kernelnewbies.org/FAQ
Previous thread: Patch against linux-next or linus tree? by Himanshu Chauhan on Sunday, August 17, 2008 - 8:52 am. (2 messages)

Next thread: Question regarding process creation by Sri Ram K Vemulpali on Sunday, August 17, 2008 - 9:44 pm. (2 messages)