From: Ian Abbott <abbotti@mev.co.uk>

For AI commands, the scan counter should be updated after every
scan.  In DMA mode, it was being updated after every repeated
segment of the channel list.  In non-DMA mode, it was being updated
after every sample.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/staging/comedi/drivers/pcl816.c |   11 ++++++++++-
 1 files changed, 10 insertions(+), 1 deletions(-)

diff --git a/drivers/staging/comedi/drivers/pcl816.c b/drivers/staging/comedi/drivers/pcl816.c
index 852fe24..5c88ddc 100644
--- a/drivers/staging/comedi/drivers/pcl816.c
+++ b/drivers/staging/comedi/drivers/pcl816.c
@@ -202,6 +202,7 @@ struct pcl816_private {
 	unsigned int ai_act_chanlist[16];	/*  MUX setting for actual AI operations */
 	unsigned int ai_act_chanlist_len;	/*  how long is actual MUX list */
 	unsigned int ai_act_chanlist_pos;	/*  actual position in MUX list */
+	unsigned int ai_n_chan;		/*  how many channels per scan */
 	unsigned int ai_poll_ptr;	/*  how many sampes transfer poll */
 	struct comedi_subdevice *sub_ai;	/*  ptr to AI subdevice */
 #ifdef unused
@@ -320,7 +321,9 @@ static irqreturn_t interrupt_pcl816_ai_mode13_int(int irq, void *d)
 	if (++devpriv->ai_act_chanlist_pos >= devpriv->ai_act_chanlist_len)
 		devpriv->ai_act_chanlist_pos = 0;
 
-	if (s->async->cur_chan == 0) {
+	s->async->cur_chan++;
+	if (s->async->cur_chan >= devpriv->ai_n_chan) {
+		s->async->cur_chan = 0;
 		devpriv->ai_act_scan++;
 	}
 
@@ -353,6 +356,11 @@ static void transfer_from_dma_buf(struct comedi_device *dev,
 		if (++devpriv->ai_act_chanlist_pos >=
 		    devpriv->ai_act_chanlist_len) {
 			devpriv->ai_act_chanlist_pos = 0;
+		}
+
+		s->async->cur_chan++;
+		if (s->async->cur_chan >= devpriv->ai_n_chan) {
+			s->async->cur_chan = 0;
 			devpriv->ai_act_scan++;
 		}
 
@@ -647,6 +655,7 @@ static int pcl816_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
 		return -EINVAL;
 	udelay(1);
 
+	devpriv->ai_n_chan = cmd->chanlist_len;
 	devpriv->ai_act_scan = 0;
 	s->async->cur_chan = 0;
 	devpriv->irq_blocked = 1;
-- 
1.7.0.1

_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel