From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Always use includes from ieee80211/ subdirectory.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/staging/rtl8192su/dot11d.h          |  102 -
 drivers/staging/rtl8192su/ieee80211.h       | 2901 ---------------------------
 drivers/staging/rtl8192su/r8192S_firmware.c |    1 -
 drivers/staging/rtl8192su/r8192S_phy.c      |    2 +-
 drivers/staging/rtl8192su/r8192U.h          |    2 +-
 drivers/staging/rtl8192su/r8192U_core.c     |    4 +-
 drivers/staging/rtl8192su/r8192U_wx.c       |    2 +-
 drivers/staging/rtl8192su/r8192U_wx.h       |    1 -
 drivers/staging/rtl8192su/r819xU_firmware.c |    1 -
 drivers/staging/rtl8192su/r819xU_phy.c      |    2 +-
 10 files changed, 6 insertions(+), 3012 deletions(-)
 delete mode 100644 drivers/staging/rtl8192su/dot11d.h
 delete mode 100644 drivers/staging/rtl8192su/ieee80211.h

diff --git a/drivers/staging/rtl8192su/dot11d.h b/drivers/staging/rtl8192su/dot11d.h
deleted file mode 100644
index 15b7a4b..0000000
--- a/drivers/staging/rtl8192su/dot11d.h
+++ /dev/null
@@ -1,102 +0,0 @@
-#ifndef __INC_DOT11D_H
-#define __INC_DOT11D_H
-
-#ifdef ENABLE_DOT11D
-#include "ieee80211.h"
-
-//#define ENABLE_DOT11D
-
-//#define DOT11D_MAX_CHNL_NUM 83
-
-typedef struct _CHNL_TXPOWER_TRIPLE {
-	u8 FirstChnl;
-	u8  NumChnls;
-	u8  MaxTxPowerInDbm;
-}CHNL_TXPOWER_TRIPLE, *PCHNL_TXPOWER_TRIPLE;
-
-typedef enum _DOT11D_STATE {
-	DOT11D_STATE_NONE = 0,
-	DOT11D_STATE_LEARNED,
-	DOT11D_STATE_DONE,
-}DOT11D_STATE;
-
-typedef struct _RT_DOT11D_INFO {
-	//DECLARE_RT_OBJECT(RT_DOT11D_INFO);
-
-	bool bEnabled; // dot11MultiDomainCapabilityEnabled
-
-	u16 CountryIeLen; // > 0 if CountryIeBuf[] contains valid country information element.
-	u8  CountryIeBuf[MAX_IE_LEN];
-	u8  CountryIeSrcAddr[6]; // Source AP of the country IE.
-	u8  CountryIeWatchdog;
-
-	u8  channel_map[MAX_CHANNEL_NUMBER+1];  //!!!Value 0: Invalid, 1: Valid (active scan), 2: Valid (passive scan)
-	//u8  ChnlListLen; // #Bytes valid in ChnlList[].
-	//u8  ChnlList[DOT11D_MAX_CHNL_NUM];
-	u8  MaxTxPwrDbmList[MAX_CHANNEL_NUMBER+1];
-
-	DOT11D_STATE State;
-}RT_DOT11D_INFO, *PRT_DOT11D_INFO;
-#define eqMacAddr(a,b)		( ((a)[0]==(b)[0] && (a)[1]==(b)[1] && (a)[2]==(b)[2] && (a)[3]==(b)[3] && (a)[4]==(b)[4] && (a)[5]==(b)[5]) ? 1:0 )
-#define cpMacAddr(des,src)	      ((des)[0]=(src)[0],(des)[1]=(src)[1],(des)[2]=(src)[2],(des)[3]=(src)[3],(des)[4]=(src)[4],(des)[5]=(src)[5])
-#define GET_DOT11D_INFO(__pIeeeDev) ((PRT_DOT11D_INFO)((__pIeeeDev)->pDot11dInfo))
-
-#define IS_DOT11D_ENABLE(__pIeeeDev) GET_DOT11D_INFO(__pIeeeDev)->bEnabled
-#define IS_COUNTRY_IE_VALID(__pIeeeDev) (GET_DOT11D_INFO(__pIeeeDev)->CountryIeLen > 0)
-
-#define IS_EQUAL_CIE_SRC(__pIeeeDev, __pTa) eqMacAddr(GET_DOT11D_INFO(__pIeeeDev)->CountryIeSrcAddr, __pTa)
-#define UPDATE_CIE_SRC(__pIeeeDev, __pTa) cpMacAddr(GET_DOT11D_INFO(__pIeeeDev)->CountryIeSrcAddr, __pTa)
-
-#define IS_COUNTRY_IE_CHANGED(__pIeeeDev, __Ie) \
-	(((__Ie).Length == 0 || (__Ie).Length != GET_DOT11D_INFO(__pIeeeDev)->CountryIeLen) ? \
-	FALSE : \
-	(!memcmp(GET_DOT11D_INFO(__pIeeeDev)->CountryIeBuf, (__Ie).Octet, (__Ie).Length)))
-
-#define CIE_WATCHDOG_TH 1
-#define GET_CIE_WATCHDOG(__pIeeeDev) GET_DOT11D_INFO(__pIeeeDev)->CountryIeWatchdog
-#define RESET_CIE_WATCHDOG(__pIeeeDev) GET_CIE_WATCHDOG(__pIeeeDev) = 0
-#define UPDATE_CIE_WATCHDOG(__pIeeeDev) ++GET_CIE_WATCHDOG(__pIeeeDev)
-
-#define IS_DOT11D_STATE_DONE(__pIeeeDev) (GET_DOT11D_INFO(__pIeeeDev)->State == DOT11D_STATE_DONE)
-
-
-void
-Dot11d_Init(
-	struct ieee80211_device *dev
-	);
-
-void
-Dot11d_Reset(
-	struct ieee80211_device *dev
-	);
-
-void
-Dot11d_UpdateCountryIe(
-	struct ieee80211_device *dev,
-	u8 *		pTaddr,
-	u16	CoutryIeLen,
-	u8 * pCoutryIe
-	);
-
-u8
-DOT11D_GetMaxTxPwrInDbm(
-	struct ieee80211_device *dev,
-	u8 Channel
-	);
-
-void
-DOT11D_ScanComplete(
-	struct ieee80211_device * dev
-	);
-
-int IsLegalChannel(
-	struct ieee80211_device * dev,
-	u8 channel
-);
-
-int ToLegalChannel(
-	struct ieee80211_device * dev,
-	u8 channel
-);
-#endif //ENABLE_DOT11D
-#endif // #ifndef __INC_DOT11D_H
diff --git a/drivers/staging/rtl8192su/ieee80211.h b/drivers/staging/rtl8192su/ieee80211.h
deleted file mode 100644
index ea97393..0000000
--- a/drivers/staging/rtl8192su/ieee80211.h
+++ /dev/null
@@ -1,2901 +0,0 @@
-/*
- * Merged with mainline ieee80211.h in Aug 2004.  Original ieee802_11
- * remains copyright by the original authors
- *
- * Portions of the merged code are based on Host AP (software wireless
- * LAN access point) driver for Intersil Prism2/2.5/3.
- *
- * Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen
- * <jkmaline@cc.hut.fi>
- * Copyright (c) 2002-2003, Jouni Malinen <jkmaline@cc.hut.fi>
- *
- * Adaption to a generic IEEE 802.11 stack by James Ketrenos
- * <jketreno@linux.intel.com>
- * Copyright (c) 2004, Intel Corporation
- *
- * Modified for Realtek's wi-fi cards by Andrea Merello
- * <andreamrl@tiscali.it>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation. See README and COPYING for
- * more details.
- */
-#ifndef IEEE80211_H
-#define IEEE80211_H
-#include <linux/if_ether.h> /* ETH_ALEN */
-#include <linux/kernel.h>   /* ARRAY_SIZE */
-#include <linux/version.h>
-#include <linux/module.h>
-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
-#include <linux/jiffies.h>
-#else
-#include <linux/jffs.h>
-#include <linux/tqueue.h>
-#endif
-#include <linux/timer.h>
-#include <linux/sched.h>
-
-#include <linux/delay.h>
-#include <linux/wireless.h>
-
-#include "ieee80211/rtl819x_HT.h"
-#include "ieee80211/rtl819x_BA.h"
-#include "ieee80211/rtl819x_TS.h"
-
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20))
-#ifndef bool
-typedef enum{false = 0, true} bool;
-#endif
-#endif
-
-#ifndef IW_MODE_MONITOR
-#define IW_MODE_MONITOR 6
-#endif
-
-#ifndef IWEVCUSTOM
-#define IWEVCUSTOM 0x8c02
-#endif
-
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0))
-#ifndef __bitwise
-#define __bitwise __attribute__((bitwise))
-#endif
-typedef __u16  __le16;
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,27))
-struct iw_spy_data{
-	/* --- Standard spy support --- */
-	int 			spy_number;
-	u_char 			spy_address[IW_MAX_SPY][ETH_ALEN];
-	struct iw_quality	spy_stat[IW_MAX_SPY];
-	/* --- Enhanced spy support (event) */
-	struct iw_quality	spy_thr_low; /* Low threshold */
-	struct iw_quality	spy_thr_high; /* High threshold */
-	u_char			spy_thr_under[IW_MAX_SPY];
-};
-#endif
-#endif
-
-#ifndef container_of
-/**
- * container_of - cast a member of a structure out to the containing structure
- *
- * @ptr:        the pointer to the member.
- * @type:       the type of the container struct this is embedded in.
- * @member:     the name of the member within the struct.
- *
- */
-#define container_of(ptr, type, member) ({                      \
-        const typeof( ((type *)0)->member ) *__mptr = (ptr);    \
-        (type *)( (char *)__mptr - offsetof(type,member) );})
-#endif
-
-#define KEY_TYPE_NA		0x0
-#define KEY_TYPE_WEP40 		0x1
-#define KEY_TYPE_TKIP		0x2
-#define KEY_TYPE_CCMP		0x4
-#define KEY_TYPE_WEP104		0x5
-
-/* added for rtl819x tx procedure */
-#define MAX_QUEUE_SIZE		0x10
-
-//
-// 8190 queue mapping
-//
-#define BK_QUEUE                               0
-#define BE_QUEUE                               1
-#define VI_QUEUE                               2
-#define VO_QUEUE                               3
-#define HCCA_QUEUE                             4
-#define TXCMD_QUEUE                            5
-#define MGNT_QUEUE                             6
-#define HIGH_QUEUE                             7
-#define BEACON_QUEUE                           8
-
-#define LOW_QUEUE                              BE_QUEUE
-#define NORMAL_QUEUE                           MGNT_QUEUE
-
-//added by amy for ps
-#define SWRF_TIMEOUT				50
-
-//added by amy for LEAP related
-#define IE_CISCO_FLAG_POSITION		0x08	// Flag byte: byte 8, numbered from 0.
-#define SUPPORT_CKIP_MIC			0x08	// bit3
-#define SUPPORT_CKIP_PK			0x10	// bit4
-//added by amy for ps
-// RF Off Level for IPS or HW/SW radio off
-#define	RT_RF_OFF_LEVL_ASPM			BIT0	// PCI ASPM
-#define	RT_RF_OFF_LEVL_CLK_REQ		BIT1	// PCI clock request
-#define	RT_RF_OFF_LEVL_PCI_D3			BIT2	// PCI D3 mode
-#define	RT_RF_OFF_LEVL_HALT_NIC		BIT3	// NIC halt, re-initialize hw parameters
-#define	RT_RF_OFF_LEVL_FREE_FW		BIT4	// FW free, re-download the FW
-#define	RT_RF_OFF_LEVL_FW_32K		BIT5	// FW in 32k
-#define	RT_RF_PS_LEVEL_ALWAYS_ASPM	BIT6	// Always enable ASPM and Clock Req in initialization.
-#define	RT_RF_LPS_DISALBE_2R			BIT30	// When LPS is on, disable 2R if no packet is received or transmittd.
-#define	RT_RF_LPS_LEVEL_ASPM			BIT31	// LPS with ASPM
-#define	RT_IN_PS_LEVEL(pPSC, _PS_FLAG)	((pPSC->CurPsLevel & _PS_FLAG) ? true : false)
-#define	RT_CLEAR_PS_LEVEL(pPSC, _PS_FLAG)	(pPSC->CurPsLevel &= (~(_PS_FLAG)))
-#define	RT_SET_PS_LEVEL(pPSC, _PS_FLAG)	(pPSC->CurPsLevel->CurPsLevel |= _PS_FLAG)
-/* defined for skb cb field */
-/* At most 28 byte */
-typedef struct cb_desc {
-        /* Tx Desc Related flags (8-9) */
-	u8 bLastIniPkt:1;
-	u8 bCmdOrInit:1;
-        u8 bFirstSeg:1;
-        u8 bLastSeg:1;
-        u8 bEncrypt:1;
-        u8 bTxDisableRateFallBack:1;
-        u8 bTxUseDriverAssingedRate:1;
-        u8 bHwSec:1; //indicate whether use Hw security. WB
-
-        u8 reserved1;
-
-        /* Tx Firmware Relaged flags (10-11)*/
-        u8 bCTSEnable:1;
-        u8 bRTSEnable:1;
-        u8 bUseShortGI:1;
-        u8 bUseShortPreamble:1;
-        u8 bTxEnableFwCalcDur:1;
-        u8 bAMPDUEnable:1;
-        u8 bRTSSTBC:1;
-        u8 RTSSC:1;
-
-        u8 bRTSBW:1;
-        u8 bPacketBW:1;
-	u8 bRTSUseShortPreamble:1;
-	u8 bRTSUseShortGI:1;
-	u8 bMulticast:1;
-	u8 bBroadcast:1;
-        //u8 reserved2:2;
-        u8 drv_agg_enable:1;
-        u8 reserved2:1;
-
-        /* Tx Desc related element(12-19) */
-        u8 rata_index;
-        u8 queue_index;
-        //u8 reserved3;
-        //u8 reserved4;
-        u16 txbuf_size;
-        //u8 reserved5;
-	u8 RATRIndex;
-        u8 reserved6;
-        u8 reserved7;
-        u8 reserved8;
-
-        /* Tx firmware related element(20-27) */
-        u8 data_rate;
-        u8 rts_rate;
-        u8 ampdu_factor;
-        u8 ampdu_density;
-        //u8 reserved9;
-        //u8 reserved10;
-        //u8 reserved11;
-        u8 DrvAggrNum;
-	u16 pkt_size;
-        u8 reserved12;
-}cb_desc, *pcb_desc;
-
-/*--------------------------Define -------------------------------------------*/
-#define MGN_1M                  0x02
-#define MGN_2M                  0x04
-#define MGN_5_5M                0x0b
-#define MGN_11M                 0x16
-
-#define MGN_6M                  0x0c
-#define MGN_9M                  0x12
-#define MGN_12M                 0x18
-#define MGN_18M                 0x24
-#define MGN_24M                 0x30
-#define MGN_36M                 0x48
-#define MGN_48M                 0x60
-#define MGN_54M                 0x6c
-
-#define MGN_MCS0                0x80
-#define MGN_MCS1                0x81
-#define MGN_MCS2                0x82
-#define MGN_MCS3                0x83
-#define MGN_MCS4                0x84
-#define MGN_MCS5                0x85
-#define MGN_MCS6                0x86
-#define MGN_MCS7                0x87
-#define MGN_MCS8                0x88
-#define MGN_MCS9                0x89
-#define MGN_MCS10               0x8a
-#define MGN_MCS11               0x8b
-#define MGN_MCS12               0x8c
-#define MGN_MCS13               0x8d
-#define MGN_MCS14               0x8e
-#define MGN_MCS15               0x8f
-#define	MGN_MCS0_SG			0x90
-#define	MGN_MCS1_SG			0x91
-#define	MGN_MCS2_SG			0x92
-#define	MGN_MCS3_SG			0x93
-#define	MGN_MCS4_SG			0x94
-#define	MGN_MCS5_SG			0x95
-#define	MGN_MCS6_SG			0x96
-#define	MGN_MCS7_SG			0x97
-#define	MGN_MCS8_SG			0x98
-#define	MGN_MCS9_SG			0x99
-#define	MGN_MCS10_SG		0x9a
-#define	MGN_MCS11_SG		0x9b
-#define	MGN_MCS12_SG		0x9c
-#define	MGN_MCS13_SG		0x9d
-#define	MGN_MCS14_SG		0x9e
-#define	MGN_MCS15_SG		0x9f
-
-
-//----------------------------------------------------------------------------
-//		802.11 Management frame Reason Code field
-//----------------------------------------------------------------------------
-enum	_ReasonCode{
-	unspec_reason	= 0x1,
-	auth_not_valid	= 0x2,
-	deauth_lv_ss	= 0x3,
-	inactivity		= 0x4,
-	ap_overload 	= 0x5,
-	class2_err		= 0x6,
-	class3_err		= 0x7,
-	disas_lv_ss 	= 0x8,
-	asoc_not_auth	= 0x9,
-
-	//----MIC_CHECK
-	mic_failure 	= 0xe,
-	//----END MIC_CHECK
-
-	// Reason code defined in 802.11i D10.0 p.28.
-	invalid_IE		= 0x0d,
-	four_way_tmout	= 0x0f,
-	two_way_tmout	= 0x10,
-	IE_dismatch 	= 0x11,
-	invalid_Gcipher = 0x12,
-	invalid_Pcipher = 0x13,
-	invalid_AKMP	= 0x14,
-	unsup_RSNIEver = 0x15,
-	invalid_RSNIE	= 0x16,
-	auth_802_1x_fail= 0x17,
-	ciper_reject		= 0x18,
-
-	// Reason code defined in 7.3.1.7, 802.1e D13.0, p.42. Added by Annie, 2005-11-15.
-	QoS_unspec		= 0x20, // 32
-	QAP_bandwidth	= 0x21, // 33
-	poor_condition	= 0x22, // 34
-	no_facility 	= 0x23, // 35
-							// Where is 36???
-	req_declined	= 0x25, // 37
-	invalid_param	= 0x26, // 38
-	req_not_honored= 0x27,	// 39
-	TS_not_created	= 0x2F, // 47
-	DL_not_allowed	= 0x30, // 48
-	dest_not_exist	= 0x31, // 49
-	dest_not_QSTA	= 0x32, // 50
-};
-
-
-
-#define aSifsTime	 (((priv->ieee80211->current_network.mode == IEEE_A)||(priv->ieee80211->current_network.mode == IEEE_N_24G)||(priv->ieee80211->current_network.mode == IEEE_N_5G))? 16 : 10)
-
-#define MGMT_QUEUE_NUM 5
-
-#define IEEE_CMD_SET_WPA_PARAM			1
-#define	IEEE_CMD_SET_WPA_IE			2
-#define IEEE_CMD_SET_ENCRYPTION			3
-#define IEEE_CMD_MLME				4
-
-#define IEEE_PARAM_WPA_ENABLED			1
-#define IEEE_PARAM_TKIP_COUNTERMEASURES		2
-#define IEEE_PARAM_DROP_UNENCRYPTED		3
-#define IEEE_PARAM_PRIVACY_INVOKED		4
-#define IEEE_PARAM_AUTH_ALGS			5
-#define IEEE_PARAM_IEEE_802_1X			6
-//It should consistent with the driver_XXX.c
-//   David, 2006.9.26
-#define IEEE_PARAM_WPAX_SELECT			7
-//Added for notify the encryption type selection
-//   David, 2006.9.26
-#define IEEE_PROTO_WPA				1
-#define IEEE_PROTO_RSN				2
-//Added for notify the encryption type selection
-//   David, 2006.9.26
-#define IEEE_WPAX_USEGROUP			0
-#define IEEE_WPAX_WEP40				1
-#define IEEE_WPAX_TKIP				2
-#define IEEE_WPAX_WRAP   			3
-#define IEEE_WPAX_CCMP				4
-#define IEEE_WPAX_WEP104			5
-
-#define IEEE_KEY_MGMT_IEEE8021X			1
-#define IEEE_KEY_MGMT_PSK			2
-
-#define IEEE_MLME_STA_DEAUTH			1
-#define IEEE_MLME_STA_DISASSOC			2
-
-
-#define IEEE_CRYPT_ERR_UNKNOWN_ALG		2
-#define IEEE_CRYPT_ERR_UNKNOWN_ADDR		3
-#define IEEE_CRYPT_ERR_CRYPT_INIT_FAILED	4
-#define IEEE_CRYPT_ERR_KEY_SET_FAILED		5
-#define IEEE_CRYPT_ERR_TX_KEY_SET_FAILED	6
-#define IEEE_CRYPT_ERR_CARD_CONF_FAILED		7
-
-
-#define	IEEE_CRYPT_ALG_NAME_LEN			16
-
-#define MAX_IE_LEN  0xff
-
-// added for kernel conflict
-#define ieee80211_crypt_deinit_entries 	ieee80211_crypt_deinit_entries_rsl
-#define ieee80211_crypt_deinit_handler 	ieee80211_crypt_deinit_handler_rsl
-#define ieee80211_crypt_delayed_deinit 	ieee80211_crypt_delayed_deinit_rsl
-#define ieee80211_register_crypto_ops  	ieee80211_register_crypto_ops_rsl
-#define ieee80211_unregister_crypto_ops ieee80211_unregister_crypto_ops_rsl
-#define ieee80211_get_crypto_ops 	ieee80211_get_crypto_ops_rsl
-
-#define ieee80211_ccmp_null		ieee80211_ccmp_null_rsl
-
-#define ieee80211_tkip_null		ieee80211_tkip_null_rsl
-
-#define ieee80211_wep_null		ieee80211_wep_null_rsl
-
-#define free_ieee80211          	free_ieee80211_rsl
-#define alloc_ieee80211        		alloc_ieee80211_rsl
-
-#define ieee80211_rx 			ieee80211_rx_rsl
-#define ieee80211_rx_mgt		ieee80211_rx_mgt_rsl
-
-#define ieee80211_get_beacon		ieee80211_get_beacon_rsl
-#define ieee80211_wake_queue		ieee80211_wake_queue_rsl
-#define ieee80211_stop_queue		ieee80211_stop_queue_rsl
-#define ieee80211_reset_queue		ieee80211_reset_queue_rsl
-#define ieee80211_softmac_stop_protocol	ieee80211_softmac_stop_protocol_rsl
-#define ieee80211_softmac_start_protocol ieee80211_softmac_start_protocol_rsl
-#define ieee80211_is_shortslot		ieee80211_is_shortslot_rsl
-#define ieee80211_is_54g		ieee80211_is_54g_rsl
-#define ieee80211_wpa_supplicant_ioctl	ieee80211_wpa_supplicant_ioctl_rsl
-#define ieee80211_ps_tx_ack		ieee80211_ps_tx_ack_rsl
-#define ieee80211_softmac_xmit		ieee80211_softmac_xmit_rsl
-#define ieee80211_stop_send_beacons	ieee80211_stop_send_beacons_rsl
-#define notify_wx_assoc_event		notify_wx_assoc_event_rsl
-#define SendDisassociation		SendDisassociation_rsl
-#define ieee80211_disassociate		ieee80211_disassociate_rsl
-#define ieee80211_start_send_beacons	ieee80211_start_send_beacons_rsl
-#define ieee80211_stop_scan		ieee80211_stop_scan_rsl
-#define ieee80211_send_probe_requests	ieee80211_send_probe_requests_rsl
-#define ieee80211_softmac_scan_syncro	ieee80211_softmac_scan_syncro_rsl
-#define ieee80211_start_scan_syncro	ieee80211_start_scan_syncro_rsl
-
-#define ieee80211_wx_get_essid		ieee80211_wx_get_essid_rsl
-#define ieee80211_wx_set_essid		ieee80211_wx_set_essid_rsl
-#define ieee80211_wx_set_rate		ieee80211_wx_set_rate_rsl
-#define ieee80211_wx_get_rate		ieee80211_wx_get_rate_rsl
-#define ieee80211_wx_set_wap		ieee80211_wx_set_wap_rsl
-#define ieee80211_wx_get_wap		ieee80211_wx_get_wap_rsl
-#define ieee80211_wx_set_mode		ieee80211_wx_set_mode_rsl
-#define ieee80211_wx_get_mode		ieee80211_wx_get_mode_rsl
-#define ieee80211_wx_set_scan		ieee80211_wx_set_scan_rsl
-#define ieee80211_wx_get_freq		ieee80211_wx_get_freq_rsl
-#define ieee80211_wx_set_freq		ieee80211_wx_set_freq_rsl
-#define ieee80211_wx_set_rawtx		ieee80211_wx_set_rawtx_rsl
-#define ieee80211_wx_get_name		ieee80211_wx_get_name_rsl
-#define ieee80211_wx_set_power		ieee80211_wx_set_power_rsl
-#define ieee80211_wx_get_power		ieee80211_wx_get_power_rsl
-#define ieee80211_wlan_frequencies	ieee80211_wlan_frequencies_rsl
-#define ieee80211_wx_set_rts		ieee80211_wx_set_rts_rsl
-#define ieee80211_wx_get_rts		ieee80211_wx_get_rts_rsl
-
-#define ieee80211_txb_free		ieee80211_txb_free_rsl
-
-#define ieee80211_wx_set_gen_ie		ieee80211_wx_set_gen_ie_rsl
-#define ieee80211_wx_get_scan		ieee80211_wx_get_scan_rsl
-#define ieee80211_wx_set_encode		ieee80211_wx_set_encode_rsl
-#define ieee80211_wx_get_encode		ieee80211_wx_get_encode_rsl
-#if WIRELESS_EXT >= 18
-#define ieee80211_wx_set_mlme		ieee80211_wx_set_mlme_rsl
-#define ieee80211_wx_set_auth		ieee80211_wx_set_auth_rsl
-#define ieee80211_wx_set_encode_ext	ieee80211_wx_set_encode_ext_rsl
-#define ieee80211_wx_get_encode_ext	ieee80211_wx_get_encode_ext_rsl
-#endif
-
-
-typedef struct ieee_param {
-	u32 cmd;
-	u8 sta_addr[ETH_ALEN];
-        union {
-		struct {
-			u8 name;
-			u32 value;
-		} wpa_param;
-		struct {
-			u32 len;
-			u8 reserved[32];
-			u8 data[0];
-		} wpa_ie;
-	        struct{
-			int command;
-    			int reason_code;
-		} mlme;
-		struct {
-			u8 alg[IEEE_CRYPT_ALG_NAME_LEN];
-			u8 set_tx;
-			u32 err;
-			u8 idx;
-			u8 seq[8]; /* sequence counter (set: RX, get: TX) */
-			u16 key_len;
-			u8 key[0];
-		} crypt;
-	} u;
-}ieee_param;
-
-
-#if WIRELESS_EXT < 17
-#define IW_QUAL_QUAL_INVALID   0x10
-#define IW_QUAL_LEVEL_INVALID  0x20
-#define IW_QUAL_NOISE_INVALID  0x40
-#define IW_QUAL_QUAL_UPDATED   0x1
-#define IW_QUAL_LEVEL_UPDATED  0x2
-#define IW_QUAL_NOISE_UPDATED  0x4
-#endif
-
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0))
-static inline void tq_init(struct tq_struct * task, void(*func)(void *), void *data)
-{
-	task->routine = func;
-	task->data 	= data;
-	//task->next = NULL;
-	INIT_LIST_HEAD(&task->list);
-	task->sync = 0;
-}
-#endif
-
-// linux under 2.6.9 release may not support it, so modify it for common use
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,9))
-//#define MSECS(t)	(1000 * ((t) / HZ) + 1000 * ((t) % HZ) / HZ)
-#define MSECS(t)	(HZ * ((t) / 1000) + (HZ * ((t) % 1000)) / 1000)
-static inline unsigned long msleep_interruptible_rsl(unsigned int msecs)
-{
-         unsigned long timeout = MSECS(msecs) + 1;
-
-         while (timeout) {
-                 set_current_state(TASK_INTERRUPTIBLE);
-                 timeout = schedule_timeout(timeout);
-         }
-         return timeout;
-}
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,31))
-static inline void msleep(unsigned int msecs)
-{
-         unsigned long timeout = MSECS(msecs) + 1;
-
-         while (timeout) {
-                 set_current_state(TASK_UNINTERRUPTIBLE);
-                 timeout = schedule_timeout(timeout);
-         }
-}
-#endif
-#else
-#define MSECS(t) msecs_to_jiffies(t)
-#define msleep_interruptible_rsl  msleep_interruptible
-#endif
-
-#define IEEE80211_DATA_LEN		2304
-/* Maximum size for the MA-UNITDATA primitive, 802.11 standard section
-   6.2.1.1.2.
-
-   The figure in section 7.1.2 suggests a body size of up to 2312
-   bytes is allowed, which is a bit confusing, I suspect this
-   represents the 2304 bytes of real data, plus a possible 8 bytes of
-   WEP IV and ICV. (this interpretation suggested by Ramiro Barreiro) */
-#define IEEE80211_1ADDR_LEN 10
-#define IEEE80211_2ADDR_LEN 16
-#define IEEE80211_3ADDR_LEN 24
-#define IEEE80211_4ADDR_LEN 30
-#define IEEE80211_FCS_LEN    4
-#define IEEE80211_HLEN                  (IEEE80211_4ADDR_LEN)
-#define IEEE80211_FRAME_LEN             (IEEE80211_DATA_LEN + IEEE80211_HLEN)
-#define IEEE80211_MGMT_HDR_LEN 24
-#define IEEE80211_DATA_HDR3_LEN 24
-#define IEEE80211_DATA_HDR4_LEN 30
-
-#define MIN_FRAG_THRESHOLD     256U
-#define MAX_FRAG_THRESHOLD     2346U
-
-
-/* Frame control field constants */
-#define IEEE80211_FCTL_VERS		0x0003
-#define IEEE80211_FCTL_FTYPE		0x000c
-#define IEEE80211_FCTL_STYPE		0x00f0
-#define IEEE80211_FCTL_FRAMETYPE	0x00fc
-#define IEEE80211_FCTL_TODS		0x0100
-#define IEEE80211_FCTL_FROMDS		0x0200
-#define IEEE80211_FCTL_DSTODS		0x0300 //added by david
-#define IEEE80211_FCTL_MOREFRAGS	0x0400
-#define IEEE80211_FCTL_RETRY		0x0800
-#define IEEE80211_FCTL_PM		0x1000
-#define IEEE80211_FCTL_MOREDATA		0x2000
-#define IEEE80211_FCTL_WEP		0x4000
-#define IEEE80211_FCTL_ORDER		0x8000
-
-#define IEEE80211_FTYPE_MGMT		0x0000
-#define IEEE80211_FTYPE_CTL		0x0004
-#define IEEE80211_FTYPE_DATA		0x0008
-
-/* management */
-#define IEEE80211_STYPE_ASSOC_REQ	0x0000
-#define IEEE80211_STYPE_ASSOC_RESP 	0x0010
-#define IEEE80211_STYPE_REASSOC_REQ	0x0020
-#define IEEE80211_STYPE_REASSOC_RESP	0x0030
-#define IEEE80211_STYPE_PROBE_REQ	0x0040
-#define IEEE80211_STYPE_PROBE_RESP	0x0050
-#define IEEE80211_STYPE_BEACON		0x0080
-#define IEEE80211_STYPE_ATIM		0x0090
-#define IEEE80211_STYPE_DISASSOC	0x00A0
-#define IEEE80211_STYPE_AUTH		0x00B0
-#define IEEE80211_STYPE_DEAUTH		0x00C0
-#define IEEE80211_STYPE_MANAGE_ACT	0x00D0
-
-/* control */
-#define IEEE80211_STYPE_PSPOLL		0x00A0
-#define IEEE80211_STYPE_RTS		0x00B0
-#define IEEE80211_STYPE_CTS		0x00C0
-#define IEEE80211_STYPE_ACK		0x00D0
-#define IEEE80211_STYPE_CFEND		0x00E0
-#define IEEE80211_STYPE_CFENDACK	0x00F0
-#define IEEE80211_STYPE_BLOCKACK   0x0094
-
-/* data */
-#define IEEE80211_STYPE_DATA		0x0000
-#define IEEE80211_STYPE_DATA_CFACK	0x0010
-#define IEEE80211_STYPE_DATA_CFPOLL	0x0020
-#define IEEE80211_STYPE_DATA_CFACKPOLL	0x0030
-#define IEEE80211_STYPE_NULLFUNC	0x0040
-#define IEEE80211_STYPE_CFACK		0x0050
-#define IEEE80211_STYPE_CFPOLL		0x0060
-#define IEEE80211_STYPE_CFACKPOLL	0x0070
-#define IEEE80211_STYPE_QOS_DATA	0x0080 //added for WMM 2006/8/2
-#define IEEE80211_STYPE_QOS_NULL	0x00C0
-
-#define IEEE80211_SCTL_FRAG		0x000F
-#define IEEE80211_SCTL_SEQ		0xFFF0
-
-/* QOS control */
-#define IEEE80211_QCTL_TID              0x000F
-
-#define	FC_QOS_BIT					BIT7
-#define IsDataFrame(pdu)			( ((pdu[0] & 0x0C)==0x08) ? true : false )
-#define	IsLegacyDataFrame(pdu)	(IsDataFrame(pdu) && (!(pdu[0]&FC_QOS_BIT)) )
-//added by wb. Is this right?
-#define IsQoSDataFrame(pframe)  ((*(u16*)pframe&(IEEE80211_STYPE_QOS_DATA|IEEE80211_FTYPE_DATA)) == (IEEE80211_STYPE_QOS_DATA|IEEE80211_FTYPE_DATA))
-#define Frame_Order(pframe)     (*(u16*)pframe&IEEE80211_FCTL_ORDER)
-#define SN_LESS(a, b)		(((a-b)&0x800)!=0)
-#define SN_EQUAL(a, b)	(a == b)
-#define MAX_DEV_ADDR_SIZE 8
-typedef enum _ACT_CATEGORY{
-        ACT_CAT_QOS = 1,
-        ACT_CAT_DLS = 2,
-        ACT_CAT_BA  = 3,
-        ACT_CAT_HT  = 7,
-        ACT_CAT_WMM = 17,
-} ACT_CATEGORY, *PACT_CATEGORY;
-
-typedef enum _TS_ACTION{
-        ACT_ADDTSREQ = 0,
-        ACT_ADDTSRSP = 1,
-        ACT_DELTS    = 2,
-        ACT_SCHEDULE = 3,
-} TS_ACTION, *PTS_ACTION;
-
-typedef enum _BA_ACTION{
-        ACT_ADDBAREQ = 0,
-        ACT_ADDBARSP = 1,
-        ACT_DELBA    = 2,
-} BA_ACTION, *PBA_ACTION;
-
-typedef enum _InitialGainOpType{
-	IG_Backup=0,
-	IG_Restore,
-	IG_Max
-}InitialGainOpType;
-//added by amy for LED 090319
-//================================================================================
-// LED customization.
-//================================================================================
-typedef enum _LED_CTL_MODE{
-        LED_CTL_POWER_ON = 1,
-        LED_CTL_LINK = 2,
-        LED_CTL_NO_LINK = 3,
-        LED_CTL_TX = 4,
-        LED_CTL_RX = 5,
-        LED_CTL_SITE_SURVEY = 6,
-        LED_CTL_POWER_OFF = 7,
-        LED_CTL_START_TO_LINK = 8,
-        LED_CTL_START_WPS = 9,
-        LED_CTL_STOP_WPS = 10,
-        LED_CTL_START_WPS_BOTTON = 11, //added for runtop
-}LED_CTL_MODE;
-
-/* debug macros */
-#define CONFIG_IEEE80211_DEBUG
-#ifdef CONFIG_IEEE80211_DEBUG
-extern u32 ieee80211_debug_level;
-#define IEEE80211_DEBUG(level, fmt, args...) \
-do { if (ieee80211_debug_level & (level)) \
-  printk(KERN_DEBUG "ieee80211: " fmt, ## args); } while (0)
-//wb added to debug out data buf
-//if you want print DATA buffer related BA, please set ieee80211_debug_level to DATA|BA
-#define IEEE80211_DEBUG_DATA(level, data, datalen)	\
-	do{ if ((ieee80211_debug_level & (level)) == (level))	\
-		{ 	\
-			int i;					\
-			u8* pdata = (u8*) data;			\
-			printk(KERN_DEBUG "ieee80211: %s()\n", __FUNCTION__);	\
-			for(i=0; i<(int)(datalen); i++)			\
-			{						\
-				printk("%2x ", pdata[i]);		\
-				if ((i+1)%16 == 0) printk("\n");	\
-			}				\
-			printk("\n");			\
-		}					\
-	} while (0)
-#else
-#define IEEE80211_DEBUG(level, fmt, args...) do {} while (0)
-#define IEEE80211_DEBUG_DATA(level, data, datalen) do {} while(0)
-#endif	/* CONFIG_IEEE80211_DEBUG */
-
-/* debug macros not dependent on CONFIG_IEEE80211_DEBUG */
-
-#define MAC_FMT "%02x:%02x:%02x:%02x:%02x:%02x"
-#define MAC_ARG(x) ((u8*)(x))[0],((u8*)(x))[1],((u8*)(x))[2],((u8*)(x))[3],((u8*)(x))[4],((u8*)(x))[5]
-
-/*
- * To use the debug system;
- *
- * If you are defining a new debug classification, simply add it to the #define
- * list here in the form of:
- *
- * #define IEEE80211_DL_xxxx VALUE
- *
- * shifting value to the left one bit from the previous entry.  xxxx should be
- * the name of the classification (for example, WEP)
- *
- * You then need to either add a IEEE80211_xxxx_DEBUG() macro definition for your
- * classification, or use IEEE80211_DEBUG(IEEE80211_DL_xxxx, ...) whenever you want
- * to send output to that classification.
- *
- * To add your debug level to the list of levels seen when you perform
- *
- * % cat /proc/net/ipw/debug_level
- *
- * you simply need to add your entry to the ipw_debug_levels array.
- *
- * If you do not see debug_level in /proc/net/ipw then you do not have
- * CONFIG_IEEE80211_DEBUG defined in your kernel configuration
- *
- */
-
-#define IEEE80211_DL_INFO          (1<<0)
-#define IEEE80211_DL_WX            (1<<1)
-#define IEEE80211_DL_SCAN          (1<<2)
-#define IEEE80211_DL_STATE         (1<<3)
-#define IEEE80211_DL_MGMT          (1<<4)
-#define IEEE80211_DL_FRAG          (1<<5)
-#define IEEE80211_DL_EAP           (1<<6)
-#define IEEE80211_DL_DROP          (1<<7)
-
-#define IEEE80211_DL_TX            (1<<8)
-#define IEEE80211_DL_RX            (1<<9)
-
-#define IEEE80211_DL_HT		   (1<<10)  //HT
-#define IEEE80211_DL_BA		   (1<<11)  //ba
-#define IEEE80211_DL_TS		   (1<<12)  //TS
-#define IEEE80211_DL_QOS           (1<<13)
-#define IEEE80211_DL_REORDER	   (1<<14)
-#define IEEE80211_DL_IOT	   (1<<15)
-#define IEEE80211_DL_IPS	   (1<<16)
-#define IEEE80211_DL_TRACE	   (1<<29)  //trace function, need to user net_ratelimit() together in order not to print too much to the screen
-#define IEEE80211_DL_DATA	   (1<<30)   //use this flag to control whether print data buf out.
-#define IEEE80211_DL_ERR	   (1<<31)   //always open
-#define IEEE80211_ERROR(f, a...) printk(KERN_ERR "ieee80211: " f, ## a)
-#define IEEE80211_WARNING(f, a...) printk(KERN_WARNING "ieee80211: " f, ## a)
-#define IEEE80211_DEBUG_INFO(f, a...)   IEEE80211_DEBUG(IEEE80211_DL_INFO, f, ## a)
-
-#define IEEE80211_DEBUG_WX(f, a...)     IEEE80211_DEBUG(IEEE80211_DL_WX, f, ## a)
-#define IEEE80211_DEBUG_SCAN(f, a...)   IEEE80211_DEBUG(IEEE80211_DL_SCAN, f, ## a)
-#define IEEE80211_DEBUG_STATE(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_STATE, f, ## a)
-#define IEEE80211_DEBUG_MGMT(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_MGMT, f, ## a)
-#define IEEE80211_DEBUG_FRAG(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_FRAG, f, ## a)
-#define IEEE80211_DEBUG_EAP(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_EAP, f, ## a)
-#define IEEE80211_DEBUG_DROP(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_DROP, f, ## a)
-#define IEEE80211_DEBUG_TX(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_TX, f, ## a)
-#define IEEE80211_DEBUG_RX(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_RX, f, ## a)
-#define IEEE80211_DEBUG_QOS(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_QOS, f, ## a)
-
-#ifdef CONFIG_IEEE80211_DEBUG
-/* Added by Annie, 2005-11-22. */
-#define MAX_STR_LEN     64
-/* I want to see ASCII 33 to 126 only. Otherwise, I print '?'. Annie, 2005-11-22.*/
-#define PRINTABLE(_ch)  (_ch>'!' && _ch<'~')
-#define IEEE80211_PRINT_STR(_Comp, _TitleString, _Ptr, _Len)                            	\
-                        if((_Comp) & level)   							\
-                        {                                                                       \
-                                int             __i;                                            \
-                                u8  buffer[MAX_STR_LEN];                                    	\
-                                int length = (_Len<MAX_STR_LEN)? _Len : (MAX_STR_LEN-1) ;  	\
-                                memset(buffer, 0, MAX_STR_LEN);                      		\
-                                memcpy(buffer, (u8 *)_Ptr, length );            		\
-                                for( __i=0; __i<MAX_STR_LEN; __i++ )                            \
-                                {                                                               \
-                                     if( !PRINTABLE(buffer[__i]) )   buffer[__i] = '?';     	\
-                                }                                                               \
-                                buffer[length] = '\0';                                          \
-                                printk("Rtl819x: ");                                         	\
-                                printk(_TitleString);                                         \
-                                printk(": %d, <%s>\n", _Len, buffer);                         \
-                        }
-#else
-#define IEEE80211_PRINT_STR(_Comp, _TitleString, _Ptr, _Len)  do {} while (0)
-#endif
-
-#include <linux/netdevice.h>
-#include <linux/if_arp.h> /* ARPHRD_ETHER */
-
-#ifndef WIRELESS_SPY
-#define WIRELESS_SPY		// enable iwspy support
-#endif
-#include <net/iw_handler.h>	// new driver API
-
-#ifndef ETH_P_PAE
-#define ETH_P_PAE 0x888E /* Port Access Entity (IEEE 802.1X) */
-#endif /* ETH_P_PAE */
-
-#define ETH_P_PREAUTH 0x88C7 /* IEEE 802.11i pre-authentication */
-
-#ifndef ETH_P_80211_RAW
-#define ETH_P_80211_RAW (ETH_P_ECONET + 1)
-#endif
-
-/* IEEE 802.11 defines */
-
-#define P80211_OUI_LEN 3
-
-struct ieee80211_snap_hdr {
-
-        u8    dsap;   /* always 0xAA */
-        u8    ssap;   /* always 0xAA */
-        u8    ctrl;   /* always 0x03 */
-        u8    oui[P80211_OUI_LEN];    /* organizational universal id */
-
-} __attribute__ ((packed));
-
-#define SNAP_SIZE sizeof(struct ieee80211_snap_hdr)
-
-#define WLAN_FC_GET_VERS(fc) ((fc) & IEEE80211_FCTL_VERS)
-#define WLAN_FC_GET_TYPE(fc) ((fc) & IEEE80211_FCTL_FTYPE)
-#define WLAN_FC_GET_STYPE(fc) ((fc) & IEEE80211_FCTL_STYPE)
-
-#define WLAN_FC_GET_FRAMETYPE(fc) ((fc) & IEEE80211_FCTL_FRAMETYPE)
-#define WLAN_GET_SEQ_FRAG(seq) ((seq) & IEEE80211_SCTL_FRAG)
-#define WLAN_GET_SEQ_SEQ(seq)  (((seq) & IEEE80211_SCTL_SEQ) >> 4)
-
-/* Authentication algorithms */
-#define WLAN_AUTH_OPEN 0
-#define WLAN_AUTH_SHARED_KEY 1
-#define WLAN_AUTH_LEAP 2
-
-#define WLAN_AUTH_CHALLENGE_LEN 128
-
-#define WLAN_CAPABILITY_BSS (1<<0)
-#define WLAN_CAPABILITY_IBSS (1<<1)
-#define WLAN_CAPABILITY_CF_POLLABLE (1<<2)
-#define WLAN_CAPABILITY_CF_POLL_REQUEST (1<<3)
-#define WLAN_CAPABILITY_PRIVACY (1<<4)
-#define WLAN_CAPABILITY_SHORT_PREAMBLE (1<<5)
-#define WLAN_CAPABILITY_PBCC (1<<6)
-#define WLAN_CAPABILITY_CHANNEL_AGILITY (1<<7)
-#define WLAN_CAPABILITY_SPECTRUM_MGMT (1<<8)
-#define WLAN_CAPABILITY_QOS (1<<9)
-#define WLAN_CAPABILITY_SHORT_SLOT (1<<10)
-#define WLAN_CAPABILITY_DSSS_OFDM (1<<13)
-
-/* 802.11g ERP information element */
-#define WLAN_ERP_NON_ERP_PRESENT (1<<0)
-#define WLAN_ERP_USE_PROTECTION (1<<1)
-#define WLAN_ERP_BARKER_PREAMBLE (1<<2)
-
-/* Status codes */
-enum ieee80211_statuscode {
-        WLAN_STATUS_SUCCESS = 0,
-        WLAN_STATUS_UNSPECIFIED_FAILURE = 1,
-        WLAN_STATUS_CAPS_UNSUPPORTED = 10,
-        WLAN_STATUS_REASSOC_NO_ASSOC = 11,
-        WLAN_STATUS_ASSOC_DENIED_UNSPEC = 12,
-        WLAN_STATUS_NOT_SUPPORTED_AUTH_ALG = 13,
-        WLAN_STATUS_UNKNOWN_AUTH_TRANSACTION = 14,
-        WLAN_STATUS_CHALLENGE_FAIL = 15,
-        WLAN_STATUS_AUTH_TIMEOUT = 16,
-        WLAN_STATUS_AP_UNABLE_TO_HANDLE_NEW_STA = 17,
-        WLAN_STATUS_ASSOC_DENIED_RATES = 18,
-        /* 802.11b */
-        WLAN_STATUS_ASSOC_DENIED_NOSHORTPREAMBLE = 19,
-        WLAN_STATUS_ASSOC_DENIED_NOPBCC = 20,
-        WLAN_STATUS_ASSOC_DENIED_NOAGILITY = 21,
-        /* 802.11h */
-        WLAN_STATUS_ASSOC_DENIED_NOSPECTRUM = 22,
-        WLAN_STATUS_ASSOC_REJECTED_BAD_POWER = 23,
-        WLAN_STATUS_ASSOC_REJECTED_BAD_SUPP_CHAN = 24,
-        /* 802.11g */
-        WLAN_STATUS_ASSOC_DENIED_NOSHORTTIME = 25,
-        WLAN_STATUS_ASSOC_DENIED_NODSSSOFDM = 26,
-        /* 802.11i */
-        WLAN_STATUS_INVALID_IE = 40,
-        WLAN_STATUS_INVALID_GROUP_CIPHER = 41,
-        WLAN_STATUS_INVALID_PAIRWISE_CIPHER = 42,
-        WLAN_STATUS_INVALID_AKMP = 43,
-        WLAN_STATUS_UNSUPP_RSN_VERSION = 44,
-        WLAN_STATUS_INVALID_RSN_IE_CAP = 45,
-        WLAN_STATUS_CIPHER_SUITE_REJECTED = 46,
-};
-
-/* Reason codes */
-enum ieee80211_reasoncode {
-        WLAN_REASON_UNSPECIFIED = 1,
-        WLAN_REASON_PREV_AUTH_NOT_VALID = 2,
-        WLAN_REASON_DEAUTH_LEAVING = 3,
-        WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY = 4,
-        WLAN_REASON_DISASSOC_AP_BUSY = 5,
-        WLAN_REASON_CLASS2_FRAME_FROM_NONAUTH_STA = 6,
-        WLAN_REASON_CLASS3_FRAME_FROM_NONASSOC_STA = 7,
-        WLAN_REASON_DISASSOC_STA_HAS_LEFT = 8,
-        WLAN_REASON_STA_REQ_ASSOC_WITHOUT_AUTH = 9,
-        /* 802.11h */
-        WLAN_REASON_DISASSOC_BAD_POWER = 10,
-        WLAN_REASON_DISASSOC_BAD_SUPP_CHAN = 11,
-        /* 802.11i */
-        WLAN_REASON_INVALID_IE = 13,
-        WLAN_REASON_MIC_FAILURE = 14,
-        WLAN_REASON_4WAY_HANDSHAKE_TIMEOUT = 15,
-        WLAN_REASON_GROUP_KEY_HANDSHAKE_TIMEOUT = 16,
-        WLAN_REASON_IE_DIFFERENT = 17,
-        WLAN_REASON_INVALID_GROUP_CIPHER = 18,
-        WLAN_REASON_INVALID_PAIRWISE_CIPHER = 19,
-        WLAN_REASON_INVALID_AKMP = 20,
-        WLAN_REASON_UNSUPP_RSN_VERSION = 21,
-        WLAN_REASON_INVALID_RSN_IE_CAP = 22,
-        WLAN_REASON_IEEE8021X_FAILED = 23,
-        WLAN_REASON_CIPHER_SUITE_REJECTED = 24,
-};
-
-#define IEEE80211_STATMASK_SIGNAL (1<<0)
-#define IEEE80211_STATMASK_RSSI (1<<1)
-#define IEEE80211_STATMASK_NOISE (1<<2)
-#define IEEE80211_STATMASK_RATE (1<<3)
-#define IEEE80211_STATMASK_WEMASK 0x7
-
-#define IEEE80211_CCK_MODULATION    (1<<0)
-#define IEEE80211_OFDM_MODULATION   (1<<1)
-
-#define IEEE80211_24GHZ_BAND     (1<<0)
-#define IEEE80211_52GHZ_BAND     (1<<1)
-
-#define IEEE80211_CCK_RATE_LEN  		4
-#define IEEE80211_CCK_RATE_1MB		        0x02
-#define IEEE80211_CCK_RATE_2MB		        0x04
-#define IEEE80211_CCK_RATE_5MB		        0x0B
-#define IEEE80211_CCK_RATE_11MB		        0x16
-#define IEEE80211_OFDM_RATE_LEN 		8
-#define IEEE80211_OFDM_RATE_6MB		        0x0C
-#define IEEE80211_OFDM_RATE_9MB		        0x12
-#define IEEE80211_OFDM_RATE_12MB		0x18
-#define IEEE80211_OFDM_RATE_18MB		0x24
-#define IEEE80211_OFDM_RATE_24MB		0x30
-#define IEEE80211_OFDM_RATE_36MB		0x48
-#define IEEE80211_OFDM_RATE_48MB		0x60
-#define IEEE80211_OFDM_RATE_54MB		0x6C
-#define IEEE80211_BASIC_RATE_MASK		0x80
-
-#define IEEE80211_CCK_RATE_1MB_MASK		(1<<0)
-#define IEEE80211_CCK_RATE_2MB_MASK		(1<<1)
-#define IEEE80211_CCK_RATE_5MB_MASK		(1<<2)
-#define IEEE80211_CCK_RATE_11MB_MASK		(1<<3)
-#define IEEE80211_OFDM_RATE_6MB_MASK		(1<<4)
-#define IEEE80211_OFDM_RATE_9MB_MASK		(1<<5)
-#define IEEE80211_OFDM_RATE_12MB_MASK		(1<<6)
-#define IEEE80211_OFDM_RATE_18MB_MASK		(1<<7)
-#define IEEE80211_OFDM_RATE_24MB_MASK		(1<<8)
-#define IEEE80211_OFDM_RATE_36MB_MASK		(1<<9)
-#define IEEE80211_OFDM_RATE_48MB_MASK		(1<<10)
-#define IEEE80211_OFDM_RATE_54MB_MASK		(1<<11)
-
-#define IEEE80211_CCK_RATES_MASK	        0x0000000F
-#define IEEE80211_CCK_BASIC_RATES_MASK	(IEEE80211_CCK_RATE_1MB_MASK | \
-	IEEE80211_CCK_RATE_2MB_MASK)
-#define IEEE80211_CCK_DEFAULT_RATES_MASK	(IEEE80211_CCK_BASIC_RATES_MASK | \
-        IEEE80211_CCK_RATE_5MB_MASK | \
-        IEEE80211_CCK_RATE_11MB_MASK)
-
-#define IEEE80211_OFDM_RATES_MASK		0x00000FF0
-#define IEEE80211_OFDM_BASIC_RATES_MASK	(IEEE80211_OFDM_RATE_6MB_MASK | \
-	IEEE80211_OFDM_RATE_12MB_MASK | \
-	IEEE80211_OFDM_RATE_24MB_MASK)
-#define IEEE80211_OFDM_DEFAULT_RATES_MASK	(IEEE80211_OFDM_BASIC_RATES_MASK | \
-	IEEE80211_OFDM_RATE_9MB_MASK  | \
-	IEEE80211_OFDM_RATE_18MB_MASK | \
-	IEEE80211_OFDM_RATE_36MB_MASK | \
-	IEEE80211_OFDM_RATE_48MB_MASK | \
-	IEEE80211_OFDM_RATE_54MB_MASK)
-#define IEEE80211_DEFAULT_RATES_MASK (IEEE80211_OFDM_DEFAULT_RATES_MASK | \
-                                IEEE80211_CCK_DEFAULT_RATES_MASK)
-
-#define IEEE80211_NUM_OFDM_RATES	    8
-#define IEEE80211_NUM_CCK_RATES	            4
-#define IEEE80211_OFDM_SHIFT_MASK_A         4
-
-
-/* this is stolen and modified from the madwifi driver*/
-#define IEEE80211_FC0_TYPE_MASK		0x0c
-#define IEEE80211_FC0_TYPE_DATA		0x08
-#define IEEE80211_FC0_SUBTYPE_MASK	0xB0
-#define IEEE80211_FC0_SUBTYPE_QOS	0x80
-
-#define IEEE80211_QOS_HAS_SEQ(fc) \
-	(((fc) & (IEEE80211_FC0_TYPE_MASK | IEEE80211_FC0_SUBTYPE_MASK)) == \
-	 (IEEE80211_FC0_TYPE_DATA | IEEE80211_FC0_SUBTYPE_QOS))
-
-/* this is stolen from ipw2200 driver */
-#define IEEE_IBSS_MAC_HASH_SIZE 31
-struct ieee_ibss_seq {
-	u8 mac[ETH_ALEN];
-	u16 seq_num[17];
-	u16 frag_num[17];
-	unsigned long packet_time[17];
-	struct list_head list;
-};
-
-/* NOTE: This data is for statistical purposes; not all hardware provides this
- *       information for frames received.  Not setting these will not cause
- *       any adverse affects. */
-struct ieee80211_rx_stats {
-#if 1
-	u32 mac_time[2];
-	s8 rssi;
-	u8 signal;
-	u8 noise;
-	u16 rate; /* in 100 kbps */
-	u8 received_channel;
-	u8 control;
-	u8 mask;
-	u8 freq;
-	u16 len;
-	u64 tsf;
-	u32 beacon_time;
-	u8 nic_type;
-	u16       Length;
-	//      u8        DataRate;      // In 0.5 Mbps
-	u8        SignalQuality; // in 0-100 index.
-	s32       RecvSignalPower; // Real power in dBm for this packet, no beautification and aggregation.
-	s8        RxPower; // in dBm Translate from PWdB
-	u8        SignalStrength; // in 0-100 index.
-	u16       bHwError:1;
-	u16       bCRC:1;
-	u16       bICV:1;
-	u16       bShortPreamble:1;
-	u16       Antenna:1;      //for rtl8185
-	u16       Decrypted:1;    //for rtl8185, rtl8187
-	u16       Wakeup:1;       //for rtl8185
-	u16       Reserved0:1;    //for rtl8185
-	u8        AGC;
-	u32       TimeStampLow;
-	u32       TimeStampHigh;
-	bool      bShift;
-	bool      bIsQosData;             // Added by Annie, 2005-12-22.
-	u8        UserPriority;
-
-	//1!!!!!!!!!!!!!!!!!!!!!!!!!!!
-	//1Attention Please!!!<11n or 8190 specific code should be put below this line>
-	//1!!!!!!!!!!!!!!!!!!!!!!!!!!!
-
-	u8        RxDrvInfoSize;
-	u8        RxBufShift;
-	bool      bIsAMPDU;
-	bool      bFirstMPDU;
-	bool      bContainHTC;
-	bool      RxIs40MHzPacket;
-	u32       RxPWDBAll;
-	u8        RxMIMOSignalStrength[4];        // in 0~100 index
-	s8        RxMIMOSignalQuality[2];
-	bool      bPacketMatchBSSID;
-	bool      bIsCCK;
-	bool      bPacketToSelf;
-	//added by amy
-	u8*       virtual_address;
-	u16          packetlength;              // Total packet length: Must equal to sum of all FragLength
-	u16          fraglength;                        // FragLength should equal to PacketLength in non-fragment case
-	u16          fragoffset;                        // Data offset for this fragment
-	u16          ntotalfrag;
-	bool      	  bisrxaggrsubframe;
-	bool		  bPacketBeacon;	//cosa add for rssi
-	bool		  bToSelfBA;		//cosa add for rssi
-	char 	  cck_adc_pwdb[4];	//cosa add for rx path selection
-	u16		  Seq_Num;
-	u8		nTotalAggPkt;		// Number of aggregated packets.
-#endif
-
-};
-
-/* IEEE 802.11 requires that STA supports concurrent reception of at least
- * three fragmented frames. This define can be increased to support more
- * concurrent frames, but it should be noted that each entry can consume about
- * 2 kB of RAM and increasing cache size will slow down frame reassembly. */
-#define IEEE80211_FRAG_CACHE_LEN 4
-
-struct ieee80211_frag_entry {
-	unsigned long first_frag_time;
-	unsigned int seq;
-	unsigned int last_frag;
-	struct sk_buff *skb;
-	u8 src_addr[ETH_ALEN];
-	u8 dst_addr[ETH_ALEN];
-};
-
-struct ieee80211_stats {
-	unsigned int tx_unicast_frames;
-	unsigned int tx_multicast_frames;
-	unsigned int tx_fragments;
-	unsigned int tx_unicast_octets;
-	unsigned int tx_multicast_octets;
-	unsigned int tx_deferred_transmissions;
-	unsigned int tx_single_retry_frames;
-	unsigned int tx_multiple_retry_frames;
-	unsigned int tx_retry_limit_exceeded;
-	unsigned int tx_discards;
-	unsigned int rx_unicast_frames;
-	unsigned int rx_multicast_frames;
-	unsigned int rx_fragments;
-	unsigned int rx_unicast_octets;
-	unsigned int rx_multicast_octets;
-	unsigned int rx_fcs_errors;
-	unsigned int rx_discards_no_buffer;
-	unsigned int tx_discards_wrong_sa;
-	unsigned int rx_discards_undecryptable;
-	unsigned int rx_message_in_msg_fragments;
-	unsigned int rx_message_in_bad_msg_fragments;
-};
-
-struct ieee80211_device;
-
-#include "ieee80211_crypt.h"
-
-#define SEC_KEY_1         (1<<0)
-#define SEC_KEY_2         (1<<1)
-#define SEC_KEY_3         (1<<2)
-#define SEC_KEY_4         (1<<3)
-#define SEC_ACTIVE_KEY    (1<<4)
-#define SEC_AUTH_MODE     (1<<5)
-#define SEC_UNICAST_GROUP (1<<6)
-#define SEC_LEVEL         (1<<7)
-#define SEC_ENABLED       (1<<8)
-#define SEC_ENCRYPT       (1<<9)
-
-#define SEC_LEVEL_0      0 /* None */
-#define SEC_LEVEL_1      1 /* WEP 40 and 104 bit */
-#define SEC_LEVEL_2      2 /* Level 1 + TKIP */
-#define SEC_LEVEL_2_CKIP 3 /* Level 1 + CKIP */
-#define SEC_LEVEL_3      4 /* Level 2 + CCMP */
-
-#define SEC_ALG_NONE            0
-#define SEC_ALG_WEP             1
-#define SEC_ALG_TKIP            2
-#define SEC_ALG_CCMP            3
-
-#define WEP_KEYS 		4
-#define WEP_KEY_LEN		13
-#define SCM_KEY_LEN             32
-#define SCM_TEMPORAL_KEY_LENGTH 16
-
-struct ieee80211_security {
-	u16 active_key:2,
-            enabled:1,
-	    auth_mode:2,
-            auth_algo:4,
-            unicast_uses_group:1,
-	    encrypt:1;
-	u8 key_sizes[WEP_KEYS];
-	u8 keys[WEP_KEYS][SCM_KEY_LEN];
-	u8 level;
-	u16 flags;
-} __attribute__ ((packed));
-
-
-/*
- 802.11 data frame from AP
-      ,-------------------------------------------------------------------.
-Bytes |  2   |  2   |    6    |    6    |    6    |  2   | 0..2312 |   4  |
-      |------|------|---------|---------|---------|------|---------|------|
-Desc. | ctrl | dura |  DA/RA  |   TA    |    SA   | Sequ |  frame  |  fcs |
-      |      | tion | (BSSID) |         |         | ence |  data   |      |
-      `-------------------------------------------------------------------'
-Total: 28-2340 bytes
-*/
-
-/* Management Frame Information Element Types */
-enum ieee80211_mfie {
-        MFIE_TYPE_SSID = 0,
-        MFIE_TYPE_RATES = 1,
-        MFIE_TYPE_FH_SET = 2,
-        MFIE_TYPE_DS_SET = 3,
-        MFIE_TYPE_CF_SET = 4,
-        MFIE_TYPE_TIM = 5,
-        MFIE_TYPE_IBSS_SET = 6,
-        MFIE_TYPE_COUNTRY = 7,
-        MFIE_TYPE_HOP_PARAMS = 8,
-        MFIE_TYPE_HOP_TABLE = 9,
-        MFIE_TYPE_REQUEST = 10,
-        MFIE_TYPE_CHALLENGE = 16,
-        MFIE_TYPE_POWER_CONSTRAINT = 32,
-        MFIE_TYPE_POWER_CAPABILITY = 33,
-        MFIE_TYPE_TPC_REQUEST = 34,
-        MFIE_TYPE_TPC_REPORT = 35,
-        MFIE_TYPE_SUPP_CHANNELS = 36,
-        MFIE_TYPE_CSA = 37,
-        MFIE_TYPE_MEASURE_REQUEST = 38,
-        MFIE_TYPE_MEASURE_REPORT = 39,
-        MFIE_TYPE_QUIET = 40,
-        MFIE_TYPE_IBSS_DFS = 41,
-        MFIE_TYPE_ERP = 42,
-        MFIE_TYPE_RSN = 48,
-        MFIE_TYPE_RATES_EX = 50,
-        MFIE_TYPE_HT_CAP= 45,
-	 MFIE_TYPE_HT_INFO= 61,
-	 MFIE_TYPE_AIRONET=133,
-        MFIE_TYPE_GENERIC = 221,
-        MFIE_TYPE_QOS_PARAMETER = 222,
-};
-
-/* Minimal header; can be used for passing 802.11 frames with sufficient
- * information to determine what type of underlying data type is actually
- * stored in the data. */
-struct ieee80211_hdr {
-        __le16 frame_ctl;
-        __le16 duration_id;
-        u8 payload[0];
-} __attribute__ ((packed));
-
-struct ieee80211_hdr_1addr {
-        __le16 frame_ctl;
-        __le16 duration_id;
-        u8 addr1[ETH_ALEN];
-        u8 payload[0];
-} __attribute__ ((packed));
-
-struct ieee80211_hdr_2addr {
-        __le16 frame_ctl;
-        __le16 duration_id;
-        u8 addr1[ETH_ALEN];
-        u8 addr2[ETH_ALEN];
-        u8 payload[0];
-} __attribute__ ((packed));
-
-struct ieee80211_hdr_3addr {
-	__le16 frame_ctl;
-	__le16 duration_id;
-	u8 addr1[ETH_ALEN];
-	u8 addr2[ETH_ALEN];
-	u8 addr3[ETH_ALEN];
-	__le16 seq_ctl;
-        u8 payload[0];
-} __attribute__ ((packed));
-
-struct ieee80211_hdr_4addr {
-	__le16 frame_ctl;
-	__le16 duration_id;
-	u8 addr1[ETH_ALEN];
-	u8 addr2[ETH_ALEN];
-	u8 addr3[ETH_ALEN];
-	__le16 seq_ctl;
-	u8 addr4[ETH_ALEN];
-        u8 payload[0];
-} __attribute__ ((packed));
-
-struct ieee80211_hdr_3addrqos {
-	__le16 frame_ctl;
-	__le16 duration_id;
-	u8 addr1[ETH_ALEN];
-	u8 addr2[ETH_ALEN];
-	u8 addr3[ETH_ALEN];
-	__le16 seq_ctl;
-        u8 payload[0];
-	__le16 qos_ctl;
-} __attribute__ ((packed));
-
-struct ieee80211_hdr_4addrqos {
-	__le16 frame_ctl;
-	__le16 duration_id;
-	u8 addr1[ETH_ALEN];
-	u8 addr2[ETH_ALEN];
-	u8 addr3[ETH_ALEN];
-	__le16 seq_ctl;
-	u8 addr4[ETH_ALEN];
-        u8 payload[0];
-	__le16 qos_ctl;
-} __attribute__ ((packed));
-
-struct ieee80211_info_element {
-	u8 id;
-	u8 len;
-	u8 data[0];
-} __attribute__ ((packed));
-
-struct ieee80211_authentication {
-	struct ieee80211_hdr_3addr header;
-	__le16 algorithm;
-	__le16 transaction;
-	__le16 status;
-	/*challenge*/
-	struct ieee80211_info_element info_element[0];
-} __attribute__ ((packed));
-
-struct ieee80211_disassoc {
-        struct ieee80211_hdr_3addr header;
-        __le16 reason;
-} __attribute__ ((packed));
-
-struct ieee80211_probe_request {
-	struct ieee80211_hdr_3addr header;
-	/* SSID, supported rates */
-        struct ieee80211_info_element info_element[0];
-} __attribute__ ((packed));
-
-struct ieee80211_probe_response {
-	struct ieee80211_hdr_3addr header;
-	u32 time_stamp[2];
-	__le16 beacon_interval;
-	__le16 capability;
-        /* SSID, supported rates, FH params, DS params,
-         * CF params, IBSS params, TIM (if beacon), RSN */
-        struct ieee80211_info_element info_element[0];
-} __attribute__ ((packed));
-
-/* Alias beacon for probe_response */
-#define ieee80211_beacon ieee80211_probe_response
-
-struct ieee80211_assoc_request_frame {
-	struct ieee80211_hdr_3addr header;
-	__le16 capability;
-	__le16 listen_interval;
-	/* SSID, supported rates, RSN */
-        struct ieee80211_info_element info_element[0];
-} __attribute__ ((packed));
-
-struct ieee80211_reassoc_request_frame {
-	struct ieee80211_hdr_3addr header;
-	__le16 capability;
-	__le16 listen_interval;
-	u8 current_ap[ETH_ALEN];
-	/* SSID, supported rates, RSN */
-        struct ieee80211_info_element info_element[0];
-} __attribute__ ((packed));
-
-struct ieee80211_assoc_response_frame {
-	struct ieee80211_hdr_3addr header;
-	__le16 capability;
-	__le16 status;
-	__le16 aid;
-	struct ieee80211_info_element info_element[0]; /* supported rates */
-} __attribute__ ((packed));
-
-struct ieee80211_txb {
-	u8 nr_frags;
-	u8 encrypted;
-	u8 queue_index;
-	u8 rts_included;
-	u16 reserved;
-	__le16 frag_size;
-	__le16 payload_size;
-	struct sk_buff *fragments[0];
-};
-
-#define MAX_TX_AGG_COUNT		  16
-struct ieee80211_drv_agg_txb {
-	u8 nr_drv_agg_frames;
-	struct sk_buff *tx_agg_frames[MAX_TX_AGG_COUNT];
-}__attribute__((packed));
-
-#define MAX_SUBFRAME_COUNT 		  64
-struct ieee80211_rxb {
-	u8 nr_subframes;
-	struct sk_buff *subframes[MAX_SUBFRAME_COUNT];
-	u8 dst[ETH_ALEN];
-	u8 src[ETH_ALEN];
-}__attribute__((packed));
-
-typedef union _frameqos {
-	u16 shortdata;
-	u8  chardata[2];
-	struct {
-		u16 tid:4;
-		u16 eosp:1;
-		u16 ack_policy:2;
-		u16 reserved:1;
-		u16 txop:8;
-	}field;
-}frameqos,*pframeqos;
-
-/* SWEEP TABLE ENTRIES NUMBER*/
-#define MAX_SWEEP_TAB_ENTRIES		  42
-#define MAX_SWEEP_TAB_ENTRIES_PER_PACKET  7
-/* MAX_RATES_LENGTH needs to be 12.  The spec says 8, and many APs
- * only use 8, and then use extended rates for the remaining supported
- * rates.  Other APs, however, stick all of their supported rates on the
- * main rates information element... */
-#define MAX_RATES_LENGTH                  ((u8)12)
-#define MAX_RATES_EX_LENGTH               ((u8)16)
-#define MAX_NETWORK_COUNT                  128
-
-#define MAX_CHANNEL_NUMBER                 161
-#define IEEE80211_SOFTMAC_SCAN_TIME	   100
-//(HZ / 2)
-#define IEEE80211_SOFTMAC_ASSOC_RETRY_TIME (HZ * 2)
-
-#define CRC_LENGTH                 4U
-
-#define MAX_WPA_IE_LEN 64
-
-#define NETWORK_EMPTY_ESSID (1<<0)
-#define NETWORK_HAS_OFDM    (1<<1)
-#define NETWORK_HAS_CCK     (1<<2)
-
-/* QoS structure */
-#define NETWORK_HAS_QOS_PARAMETERS      (1<<3)
-#define NETWORK_HAS_QOS_INFORMATION     (1<<4)
-#define NETWORK_HAS_QOS_MASK            (NETWORK_HAS_QOS_PARAMETERS | \
-                                         NETWORK_HAS_QOS_INFORMATION)
-/* 802.11h */
-#define NETWORK_HAS_POWER_CONSTRAINT    (1<<5)
-#define NETWORK_HAS_CSA                 (1<<6)
-#define NETWORK_HAS_QUIET               (1<<7)
-#define NETWORK_HAS_IBSS_DFS            (1<<8)
-#define NETWORK_HAS_TPC_REPORT          (1<<9)
-
-#define NETWORK_HAS_ERP_VALUE           (1<<10)
-
-#define QOS_QUEUE_NUM                   4
-#define QOS_OUI_LEN                     3
-#define QOS_OUI_TYPE                    2
-#define QOS_ELEMENT_ID                  221
-#define QOS_OUI_INFO_SUB_TYPE           0
-#define QOS_OUI_PARAM_SUB_TYPE          1
-#define QOS_VERSION_1                   1
-#define QOS_AIFSN_MIN_VALUE             2
-#if 1
-struct ieee80211_qos_information_element {
-        u8 elementID;
-        u8 length;
-        u8 qui[QOS_OUI_LEN];
-        u8 qui_type;
-        u8 qui_subtype;
-        u8 version;
-        u8 ac_info;
-} __attribute__ ((packed));
-
-struct ieee80211_qos_ac_parameter {
-        u8 aci_aifsn;
-        u8 ecw_min_max;
-        __le16 tx_op_limit;
-} __attribute__ ((packed));
-
-struct ieee80211_qos_parameter_info {
-        struct ieee80211_qos_information_element info_element;
-        u8 reserved;
-        struct ieee80211_qos_ac_parameter ac_params_record[QOS_QUEUE_NUM];
-} __attribute__ ((packed));
-
-struct ieee80211_qos_parameters {
-        __le16 cw_min[QOS_QUEUE_NUM];
-        __le16 cw_max[QOS_QUEUE_NUM];
-        u8 aifs[QOS_QUEUE_NUM];
-        u8 flag[QOS_QUEUE_NUM];
-        __le16 tx_op_limit[QOS_QUEUE_NUM];
-} __attribute__ ((packed));
-
-struct ieee80211_qos_data {
-        struct ieee80211_qos_parameters parameters;
-        int active;
-        int supported;
-        u8 param_count;
-        u8 old_param_count;
-};
-
-struct ieee80211_tim_parameters {
-        u8 tim_count;
-        u8 tim_period;
-} __attribute__ ((packed));
-
-//#else
-struct ieee80211_wmm_ac_param {
-	u8 ac_aci_acm_aifsn;
-	u8 ac_ecwmin_ecwmax;
-	u16 ac_txop_limit;
-};
-
-struct ieee80211_wmm_ts_info {
-	u8 ac_dir_tid;
-	u8 ac_up_psb;
-	u8 reserved;
-} __attribute__ ((packed));
-
-struct ieee80211_wmm_tspec_elem {
-	struct ieee80211_wmm_ts_info ts_info;
-	u16 norm_msdu_size;
-	u16 max_msdu_size;
-	u32 min_serv_inter;
-	u32 max_serv_inter;
-	u32 inact_inter;
-	u32 suspen_inter;
-	u32 serv_start_time;
-	u32 min_data_rate;
-	u32 mean_data_rate;
-	u32 peak_data_rate;
-	u32 max_burst_size;
-	u32 delay_bound;
-	u32 min_phy_rate;
-	u16 surp_band_allow;
-	u16 medium_time;
-}__attribute__((packed));
-#endif
-enum eap_type {
-	EAP_PACKET = 0,
-	EAPOL_START,
-	EAPOL_LOGOFF,
-	EAPOL_KEY,
-	EAPOL_ENCAP_ASF_ALERT
-};
-
-static const char *eap_types[] = {
-	[EAP_PACKET]		= "EAP-Packet",
-	[EAPOL_START]		= "EAPOL-Start",
-	[EAPOL_LOGOFF]		= "EAPOL-Logoff",
-	[EAPOL_KEY]		= "EAPOL-Key",
-	[EAPOL_ENCAP_ASF_ALERT]	= "EAPOL-Encap-ASF-Alert"
-};
-
-static inline const char *eap_get_type(int type)
-{
-	return ((u32)type >= ARRAY_SIZE(eap_types)) ? "Unknown" : eap_types[type];
-}
-//added by amy for reorder
-static inline u8 Frame_QoSTID(u8* buf)
-{
-	struct ieee80211_hdr_3addr *hdr;
-	u16 fc;
-	hdr = (struct ieee80211_hdr_3addr *)buf;
-	fc = le16_to_cpu(hdr->frame_ctl);
-	return (u8)((frameqos*)(buf + (((fc & IEEE80211_FCTL_TODS)&&(fc & IEEE80211_FCTL_FROMDS))? 30 : 24)))->field.tid;
-}
-
-//added by amy for reorder
-
-struct eapol {
-	u8 snap[6];
-	u16 ethertype;
-	u8 version;
-	u8 type;
-	u16 length;
-} __attribute__ ((packed));
-
-struct ieee80211_softmac_stats{
-	unsigned int rx_ass_ok;
-	unsigned int rx_ass_err;
-	unsigned int rx_probe_rq;
-	unsigned int tx_probe_rs;
-	unsigned int tx_beacons;
-	unsigned int rx_auth_rq;
-	unsigned int rx_auth_rs_ok;
-	unsigned int rx_auth_rs_err;
-	unsigned int tx_auth_rq;
-	unsigned int no_auth_rs;
-	unsigned int no_ass_rs;
-	unsigned int tx_ass_rq;
-	unsigned int rx_ass_rq;
-	unsigned int tx_probe_rq;
-	unsigned int reassoc;
-	unsigned int swtxstop;
-	unsigned int swtxawake;
-	unsigned char CurrentShowTxate;
-	unsigned char last_packet_rate;
-	unsigned int txretrycount;
-};
-
-#define BEACON_PROBE_SSID_ID_POSITION 12
-
-struct ieee80211_info_element_hdr {
-	u8 id;
-	u8 len;
-} __attribute__ ((packed));
-
-/*
- * These are the data types that can make up management packets
- *
-	u16 auth_algorithm;
-	u16 auth_sequence;
-	u16 beacon_interval;
-	u16 capability;
-	u8 current_ap[ETH_ALEN];
-	u16 listen_interval;
-	struct {
-		u16 association_id:14, reserved:2;
-	} __attribute__ ((packed));
-	u32 time_stamp[2];
-	u16 reason;
-	u16 status;
-*/
-
-#define IEEE80211_DEFAULT_TX_ESSID "Penguin"
-#define IEEE80211_DEFAULT_BASIC_RATE 2 //1Mbps
-
-enum {WMM_all_frame, WMM_two_frame, WMM_four_frame, WMM_six_frame};
-#define MAX_SP_Len  (WMM_all_frame << 4)
-#define IEEE80211_QOS_TID 0x0f
-#define QOS_CTL_NOTCONTAIN_ACK (0x01 << 5)
-
-#define IEEE80211_DTIM_MBCAST 4
-#define IEEE80211_DTIM_UCAST 2
-#define IEEE80211_DTIM_VALID 1
-#define IEEE80211_DTIM_INVALID 0
-
-#define IEEE80211_PS_DISABLED 0
-#define IEEE80211_PS_UNICAST IEEE80211_DTIM_UCAST
-#define IEEE80211_PS_MBCAST IEEE80211_DTIM_MBCAST
-
-//added by David for QoS 2006/6/30
-//#define WMM_Hang_8187
-#ifdef WMM_Hang_8187
-#undef WMM_Hang_8187
-#endif
-
-#define WME_AC_BK   0x00
-#define WME_AC_BE   0x01
-#define WME_AC_VI   0x02
-#define WME_AC_VO   0x03
-#define WME_ACI_MASK 0x03
-#define WME_AIFSN_MASK 0x03
-#define WME_AC_PRAM_LEN 16
-
-#define MAX_RECEIVE_BUFFER_SIZE 9100
-
-//UP Mapping to AC, using in MgntQuery_SequenceNumber() and maybe for DSCP
-//#define UP2AC(up)	((up<3) ? ((up==0)?1:0) : (up>>1))
-#if 1
-#define UP2AC(up) (		   \
-	((up) < 1) ? WME_AC_BE : \
-	((up) < 3) ? WME_AC_BK : \
-	((up) < 4) ? WME_AC_BE : \
-	((up) < 6) ? WME_AC_VI : \
-	WME_AC_VO)
-#endif
-//AC Mapping to UP, using in Tx part for selecting the corresponding TX queue
-#define AC2UP(_ac)	(       \
-	((_ac) == WME_AC_VO) ? 6 : \
-	((_ac) == WME_AC_VI) ? 5 : \
-	((_ac) == WME_AC_BK) ? 1 : \
-	0)
-
-#define	ETHER_ADDR_LEN		6	/* length of an Ethernet address */
-#define ETHERNET_HEADER_SIZE    14      /* length of two Ethernet address plus ether type*/
-
-struct	ether_header {
-	u8 ether_dhost[ETHER_ADDR_LEN];
-	u8 ether_shost[ETHER_ADDR_LEN];
-	u16 ether_type;
-} __attribute__((packed));
-
-#ifndef ETHERTYPE_PAE
-#define	ETHERTYPE_PAE	0x888e		/* EAPOL PAE/802.1x */
-#endif
-#ifndef ETHERTYPE_IP
-#define	ETHERTYPE_IP	0x0800		/* IP protocol */
-#endif
-
-typedef struct _bss_ht{
-
-	bool				support_ht;
-
-	// HT related elements
-	u8					ht_cap_buf[32];
-	u16					ht_cap_len;
-	u8					ht_info_buf[32];
-	u16					ht_info_len;
-
-	HT_SPEC_VER			ht_spec_ver;
-	//HT_CAPABILITY_ELE			bdHTCapEle;
-	//HT_INFORMATION_ELE		bdHTInfoEle;
-
-	bool				aggregation;
-	bool				long_slot_time;
-}bss_ht, *pbss_ht;
-
-typedef enum _erp_t{
-	ERP_NonERPpresent	= 0x01,
-	ERP_UseProtection	= 0x02,
-	ERP_BarkerPreambleMode = 0x04,
-} erp_t;
-
-
-struct ieee80211_network {
-	/* These entries are used to identify a unique network */
-	u8 bssid[ETH_ALEN];
-	u8 channel;
-	/* Ensure null-terminated for any debug msgs */
-	u8 ssid[IW_ESSID_MAX_SIZE + 1];
-	u8 ssid_len;
-#if 1
-        struct ieee80211_qos_data qos_data;
-#else
-       // Qos related. Added by Annie, 2005-11-01.
-        BSS_QOS   BssQos;
-#endif
-
-	//added by amy for LEAP
-	bool	bWithAironetIE;
-	bool	bCkipSupported;
-	bool	bCcxRmEnable;
-	u16 	CcxRmState[2];
-	// CCXv4 S59, MBSSID.
-	bool	bMBssidValid;
-	u8	MBssidMask;
-	u8	MBssid[6];
-	// CCX 2 S38, WLAN Device Version Number element. Annie, 2006-08-20.
-	bool	bWithCcxVerNum;
-	u8	BssCcxVerNumber;
-	/* These are network statistics */
-	struct ieee80211_rx_stats stats;
-	u16 capability;
-	u8  rates[MAX_RATES_LENGTH];
-	u8  rates_len;
-	u8  rates_ex[MAX_RATES_EX_LENGTH];
-	u8  rates_ex_len;
-	unsigned long last_scanned;
-	u8  mode;
-	u32 flags;
-	u32 last_associate;
-	u32 time_stamp[2];
-	u16 beacon_interval;
-	u16 listen_interval;
-	u16 atim_window;
-	u8  erp_value;
-	u8  wpa_ie[MAX_WPA_IE_LEN];
-	size_t wpa_ie_len;
-	u8  rsn_ie[MAX_WPA_IE_LEN];
-	size_t rsn_ie_len;
-
-        struct ieee80211_tim_parameters tim;
-	u8  dtim_period;
-	u8  dtim_data;
-	u32 last_dtim_sta_time[2];
-
-        //appeded for QoS
-        u8 wmm_info;
-        struct ieee80211_wmm_ac_param wmm_param[4];
-        u8 QoS_Enable;
-#ifdef THOMAS_TURBO
-	u8 Turbo_Enable;//enable turbo mode, added by thomas
-#endif
-#ifdef ENABLE_DOT11D
-	u16 CountryIeLen;
-	u8 CountryIeBuf[MAX_IE_LEN];
-#endif
-        // HT Related, by amy, 2008.04.29
-	BSS_HT	bssht;
-	// Add to handle broadcom AP management frame CCK rate.
-	bool broadcom_cap_exist;
-	bool realtek_cap_exit;
-	bool marvell_cap_exist;
-	bool ralink_cap_exist;
-	bool atheros_cap_exist;
-	bool cisco_cap_exist;
-	bool unknown_cap_exist;
-//	u8	berp_info;
-	bool	berp_info_valid;
-	bool buseprotection;
-	//put at the end of the structure.
-	struct list_head list;
-};
-
-#if 1
-enum ieee80211_state {
-
-	/* the card is not linked at all */
-	IEEE80211_NOLINK = 0,
-
-	/* IEEE80211_ASSOCIATING* are for BSS client mode
-	 * the driver shall not perform RX filtering unless
-	 * the state is LINKED.
-	 * The driver shall just check for the state LINKED and
-	 * defaults to NOLINK for ALL the other states (including
-	 * LINKED_SCANNING)
-	 */
-
-	/* the association procedure will start (wq scheduling)*/
-	IEEE80211_ASSOCIATING,
-	IEEE80211_ASSOCIATING_RETRY,
-
-	/* the association procedure is sending AUTH request*/
-	IEEE80211_ASSOCIATING_AUTHENTICATING,
-
-	/* the association procedure has successfully authentcated
-	 * and is sending association request
-	 */
-	IEEE80211_ASSOCIATING_AUTHENTICATED,
-
-	/* the link is ok. the card associated to a BSS or linked
-	 * to a ibss cell or acting as an AP and creating the bss
-	 */
-	IEEE80211_LINKED,
-
-	/* same as LINKED, but the driver shall apply RX filter
-	 * rules as we are in NO_LINK mode. As the card is still
-	 * logically linked, but it is doing a syncro site survey
-	 * then it will be back to LINKED state.
-	 */
-	IEEE80211_LINKED_SCANNING,
-
-};
-#else
-enum ieee80211_state {
-        IEEE80211_UNINITIALIZED = 0,
-        IEEE80211_INITIALIZED,
-        IEEE80211_ASSOCIATING,
-        IEEE80211_ASSOCIATED,
-        IEEE80211_AUTHENTICATING,
-        IEEE80211_AUTHENTICATED,
-        IEEE80211_SHUTDOWN
-};
-#endif
-
-#define DEFAULT_MAX_SCAN_AGE (15 * HZ)
-#define DEFAULT_FTS 2346
-
-#define CFG_IEEE80211_RESERVE_FCS (1<<0)
-#define CFG_IEEE80211_COMPUTE_FCS (1<<1)
-#define CFG_IEEE80211_RTS (1<<2)
-
-#define IEEE80211_24GHZ_MIN_CHANNEL 1
-#define IEEE80211_24GHZ_MAX_CHANNEL 14
-#define IEEE80211_24GHZ_CHANNELS (IEEE80211_24GHZ_MAX_CHANNEL - \
-                                  IEEE80211_24GHZ_MIN_CHANNEL + 1)
-
-#define IEEE80211_52GHZ_MIN_CHANNEL 34
-#define IEEE80211_52GHZ_MAX_CHANNEL 165
-#define IEEE80211_52GHZ_CHANNELS (IEEE80211_52GHZ_MAX_CHANNEL - \
-                                  IEEE80211_52GHZ_MIN_CHANNEL + 1)
-
-#if (LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,11))
-extern inline int is_multicast_ether_addr(const u8 *addr)
-{
-        return ((addr[0] != 0xff) && (0x01 & addr[0]));
-}
-#endif
-
-#if (LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,13))
-extern inline int is_broadcast_ether_addr(const u8 *addr)
-{
-	return ((addr[0] == 0xff) && (addr[1] == 0xff) && (addr[2] == 0xff) &&   \
-		(addr[3] == 0xff) && (addr[4] == 0xff) && (addr[5] == 0xff));
-}
-#endif
-
-typedef struct tx_pending_t{
-	int frag;
-	struct ieee80211_txb *txb;
-}tx_pending_t;
-
-typedef struct _bandwidth_autoswitch
-{
-	long threshold_20Mhzto40Mhz;
-	long	threshold_40Mhzto20Mhz;
-	bool bforced_tx20Mhz;
-	bool bautoswitch_enable;
-}bandwidth_autoswitch,*pbandwidth_autoswitch;
-
-
-//added by amy for order
-
-#define REORDER_WIN_SIZE	128
-#define REORDER_ENTRY_NUM	128
-typedef struct _RX_REORDER_ENTRY
-{
-	struct list_head	List;
-	u16			SeqNum;
-	struct ieee80211_rxb* prxb;
-} RX_REORDER_ENTRY, *PRX_REORDER_ENTRY;
-//added by amy for order
-typedef enum _Fsync_State{
-	Default_Fsync,
-	HW_Fsync,
-	SW_Fsync
-}Fsync_State;
-
-// Power save mode configured.
-typedef	enum _RT_PS_MODE
-{
-	eActive,	// Active/Continuous access.
-	eMaxPs,		// Max power save mode.
-	eFastPs		// Fast power save mode.
-}RT_PS_MODE;
-
-typedef enum _IPS_CALLBACK_FUNCION
-{
-	IPS_CALLBACK_NONE = 0,
-	IPS_CALLBACK_MGNT_LINK_REQUEST = 1,
-	IPS_CALLBACK_JOIN_REQUEST = 2,
-}IPS_CALLBACK_FUNCION;
-
-typedef enum _RT_JOIN_ACTION{
-	RT_JOIN_INFRA   = 1,
-	RT_JOI