* Since we set antenna flags on phy init and ack bitrate
mode on pcu init, there is no need to save/restore sta_id
flags on ath5k_hw_reset. Also we don't need to re-set our
mac address because it's not affected by resets.
Signed-off-by: Nick Kossifidis <mickflemm@gmail.com>
---
drivers/net/wireless/ath/ath5k/reset.c | 22 +---------------------
1 files changed, 1 insertions(+), 21 deletions(-)
diff --git a/drivers/net/wireless/ath/ath5k/reset.c b/drivers/net/wireless/ath/ath5k/reset.c
index f92f7bb..93014fd 100644
--- a/drivers/net/wireless/ath/ath5k/reset.c
+++ b/drivers/net/wireless/ath/ath5k/reset.c
@@ -940,13 +940,11 @@ static void ath5k_hw_commit_eeprom_settings(struct ath5k_hw *ah,
int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode,
struct ieee80211_channel *channel, bool fast, bool skip_pcu)
{
- struct ath_common *common = ath5k_hw_common(ah);
- u32 s_seq[10], s_led[3], staid1_flags, tsf_up, tsf_lo;
+ u32 s_seq[10], s_led[3], tsf_up, tsf_lo;
u8 mode, freq, ee_mode;
int i, ret;
ee_mode = 0;
- staid1_flags = 0;
tsf_up = 0;
tsf_lo = 0;
freq = 0;
@@ -1115,15 +1113,6 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode,
s_led[1] = ath5k_hw_reg_read(ah, AR5K_GPIOCR);
s_led[2] = ath5k_hw_reg_read(ah, AR5K_GPIODO);
- /* AR5K_STA_ID1 flags, only preserve antenna
- * settings and ack/cts rate mode */
- staid1_flags = ath5k_hw_reg_read(ah, AR5K_STA_ID1) &
- (AR5K_STA_ID1_DEFAULT_ANTENNA |
- AR5K_STA_ID1_DESC_ANTENNA |
- AR5K_STA_ID1_RTS_DEF_ANTENNA |
- AR5K_STA_ID1_ACKCTS_6MB |
- AR5K_STA_ID1_BASE_RATE_11B |
- AR5K_STA_ID1_SELFGEN_DEF_ANT);
/*
* Since we are going to write rf buffer
@@ -1195,15 +1184,6 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode,
ath5k_hw_reg_write(ah, s_led[1], AR5K_GPIOCR);
ath5k_hw_reg_write(ah, s_led[2], AR5K_GPIODO);
- /* Restore sta_id flags and preserve our mac address*/
- ath5k_hw_reg_write(ah,
- ...
