On Tue, Mar 09, 2010 at 01:31:55PM -0800, David Christensen wrote:
quoted text > > > > patch can fix the RX issue you're suffering from. Anyway,
> > would you
> > > > give it try the patch at the following URL?
> > > >
http://people.freebsd.org/~yongari/bce/bce.20100305.diff
> > > > The patch was generated against CURRENT and you may see a message
> > > > like "Disabling COAL_NOW timedout!" during interface up. You can
> > > > ignore that message.
> > >
> > > It's been running for about 1:23 on the patched driver. I'm still
> > > seeing the com_no_buffers increase:
> > >
> > > [firewall2.jnb1] ~ # sysctl dev.bce |grep com_no_buffers
> > > dev.bce.0.com_no_buffers: 5642
> > > dev.bce.1.com_no_buffers: 497
> > > dev.bce.2.com_no_buffers: 6260612
> > > dev.bce.3.com_no_buffers: 4871338
> > >
> >
> > Still have no idea why these counters are increasing here.
> > Actually the counter is read from scratch pad of completion
> > processor. The datasheet does not even document the counter.
> > Maybe david know better what's happening here(CCed).
> >
> > > Interupt rate is down now, at about 3500 per second per interface.
> > >
> > > Interestingly setting net.inet.ip.fastforwarding=0 reduces CPU
> > > consumption from 25% to 9% and less packet loss.
>
> The com_no_buffers statistic comes from firmware and indicates how
> many times a valid frame was received but could not be placed into
> the receive chain because there were no available RX buffers. The
> firmware will then drop the frame but that dropped frame won't be
> reflected in any of the hardware based statistics.
>
Yeah, but the question is why bce(4) has no available RX buffers.
The system has a lot of available mbufs so I don't see the root
cause here.
quoted text > Dave
_______________________________________________
freebsd-current@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org"
