| Ivan Radovanovic | Weird installation issue
Hello,
I recently wanted to update FreeBSD on my computer to latest version,
but now I am facing weird problem. After completing installation from
dvd I can't boot into BSD. I naturally assumed this is some boot
manager/boot sector issue, and since I am using Vista also (but on the
other hard disk) I first overwrited its boot manager with FreeBSD's but
without any luck (when I press F2 to start BSD machine either stops to
respond or prints # for any keypress, no any messages from BSD
bootload...
| Jul 4, 2:17 pm 2009 |
| Harald Schmalzbauer | Odd disk spin-ups (seperate non-OS-disk)
Hello,
I have -current installed on a SSD (incl. /var) and have another,=20
usually not used, hard disk which gets spun down after some minutes idle =
time.
Frequently my complete system stops (no mouse moving) until the not used =
hard disk spins up.
How can I find out what process causes the disk access and more=20
important, why does it block my complete system?
Best regards,
-Harry
| Jul 4, 4:13 am 2009 |
| Alexander Best | clangbsd svn compilation error
i just grabbed a svn snapshot of clangbsd and did a buildworld inside it, but
i'm getting this error:
c++ -O2 -fno-strict-aliasing -pipe
-I/usr/local/src/clangbsd/usr.bin/clang/bin/tblgen/../../../../contrib/llvm/include
-I/usr/local/src/clangbsd/usr.bin/clang/bin/tblgen/../../../../contrib/llvm/tools/clang/include
-I/usr/local/src/clangbsd/usr.bin/clang/bin/tblgen/../../../../contrib/llvm/utils/TableGen
-I. -I/usr/local/src/clangbsd/usr.bin/clang/bin/tblgen/../../include
-DLLVM_ON_UNIX -DLLVM_ON_F...
| Jul 3, 8:20 pm 2009 |
| Hans Petter Selasky |
| Jul 4, 3:45 am 2009 |
| Patrick Lamaiziere | Re: ulpt problem (USB_ERR_IOERROR)
Le Sat, 4 Jul 2009 09:45:40 +0200,
Sometime cups writes only a litle amount of datas:
[Job 40] Read 161 bytes of print data...
[Job 40] Wrote 161 bytes of print data...
[Job 40] Read 251 bytes of print data...
[Job 40] Wrote 251 bytes of print data...
[Job 40] Read 162 bytes of print data...
[Job 40] Wrote 162 bytes of print data...
[Job 40] Read 86 bytes of print data...
[Job 40] Wrote 86 bytes of print data...
[Job 40] Read 3292 bytes of print data...
[Job 40] Wrote 3292 bytes of print da...
| Jul 4, 10:43 am 2009 |
| Patrick Lamaiziere |
| Jul 4, 3:14 am 2009 |
| Patrick Lamaiziere | Re: ulpt problem (USB_ERR_IOERROR)
Le Fri, 3 Jul 2009 19:29:15 +0200,
Hans Petter Selasky <hselasky@c2i.net> a écrit :
Yes I print the cups' test page, I've reinstalled all cupds, foomatic
On 7.2 (but not on the same hardware):
ulptopen: flags=0x40
ulpt_open: open input pipe
ulpt_open: start read callout
ulptopen: done, error=0
ulpt_tick: start sc=0xc6fae000
ulpt_tick: err=1
ulpt_read_cb: start sc=0xc6fae000, err=0 n=0
ulpt_tick: start sc=0xc6fae000
ulpt_tick: err=1
ulpt_read_cb: start sc=0xc6fae000, err=0 n=0...
| Jul 4, 3:07 am 2009 |
| Kevin Oberman | Re: nice work on ntp.conf!
Really nice, although I feel uncomfortable about the use of LOCAL. It is
a great opportunity for foot shooting and, since most systems running
NTP are not used as serves, I think that it should be left commented
out in the default case.
--
R. Kevin Oberman, Network Engineer
Energy Sciences Network (ESnet)
Ernest O. Lawrence Berkeley National Laboratory (Berkeley Lab)
E-mail: oberman@es.net Phone: +1 510 486-8634
Key fingerprint:059B 2DDF 031C 9BA3 14A4 EADA 927D EBB3 987B 3751
______________...
| Jul 4, 7:23 pm 2009 |
| Paul Wootton |
| Jul 4, 10:30 am 2009 |
| Maxim Ignatenko |
| Jul 4, 4:59 pm 2009 |
| Harald Schmalzbauer | Re: RFC: ATA to CAM integration patch (and gjournaled previu...
Alexander Motin schrieb am 26.06.2009 20:47 (localtime):
Late, but now I'd like to jump in.
I have a gournaled FS whoch lists it's consumer as ad12p6
Otherwise I only use labels (ufs) for quiet some time, so I thought=20
testing would be painless...
Can I safely remove glabel from the unmounted fs and relabel the new devi=
ce?
Any Experiences?
Thanks,
-Harry
| Jul 4, 7:54 pm 2009 |
| Alexander Motin | Re: RFC: ATA to CAM integration patch
I've found how to make this DVD work. It refused to process PACKET
command until I have explicitly set it's PATA-legacy transfer mode to
the maximal supported.
%camcontrol devlist
<ST3500410AS CC34> at scbus0 target 0 lun 0 (pass0,ada0)
<MATSHITA DVD-ROM UJDA780 1.50> at scbus2 target 0 lun 0 (cd0,pass1)
Patch committed to P4.
--
Alexander Motin
_______________________________________________
freebsd-current@freebsd.org mailing list
[ message continues ] " title="http://lists.freebsd.o... ">http://lists.freebsd.o...
| Jul 4, 7:20 am 2009 |
| Chris Hedley | Re: New builds won't boot (fwd)
No problems, I may have a look at the ata-cam patch myself to see if
that's any more successful. So thanks for the idea. :)
On a completely different subject (and unrelated to the kind souls who
have helped out), I'm a bit miffed to find these messages have been gated
onto the web by freebsd.org, kerneltrap.org et al with complete, intact
email addresses making them easily available to every spammer, 419er and
other miscreant on the net. I was wondering why the amount of spam I was ...
| Jul 4, 5:37 pm 2009 |
| Rainer Hurling |
| Jul 4, 4:49 am 2009 |
| Hans Petter Selasky |
| Jul 4, 5:43 am 2009 |
| Rainer Hurling | Re: Logitech QuickCam 9000 Pro
Hello Hans Petter,
thank you for answering. I am working with newest 8.0-CURRENT.
Your latest changes in our post were at:
http://p4db.freebsd.org/chv.cgi?CH=158563
After that patches, I got the following output
# usbconfig
ugen1.2: <QuickCam Pro 9000 Logitech> at usbus1, cfg=0 md=HOST spd=HIGH
(480Mbps) pwr=ON
The entry in /sys/dev/usb/usbdevs (line 1649) seems ok:
product LOGITECH QUICKCAMPRO3 0x0990 QuickCam Pro 9000
Tell me, if you need more information or te...
| Jul 4, 6:40 am 2009 |
| Hans Petter Selasky |
| Jul 4, 6:42 am 2009 |
| Rainer Hurling |
| Jul 4, 6:52 am 2009 |
| Hans Petter Selasky |
| Jul 4, 7:48 am 2009 |
| Rainer Hurling |
| Jul 4, 8:56 am 2009 |
| Hans Petter Selasky |
| Jul 4, 2:24 pm 2009 |
| Rainer Hurling |
| Jul 4, 3:13 pm 2009 |
