Le Fri, 3 Jul 2009 19:29:15 +0200,

Hans Petter Selasky  a écrit :
...
> > It looks like there are some problems even with the first job (I

quoted text
> > missed this point before).

> >

> > ulpt0: using bi-directional

> > ulpt_write_callback:220: state=0x0 actlen=0

> > ulpt_write_callback:220: state=0x1 actlen=2889

> > ulpt_write_callback:220: state=0x1 actlen=3023

> > ...

> > ulpt_status_callback:352: error=USB_ERR_STALLED

> > ulpt_write_callback:220: state=0x1 actlen=16384

> > ulpt_write_callback:220: state=0x1 actlen=16384

>

> At this point it looks like the firmware crashes, when the error code

> changes from STALLED to IOERROR.

>

> Are you sure the .ps/.pcl file is not corrupt?

Yes I print the cups' test page, I've reinstalled all cupds, foomatic

and hpijs just to be sure.
> > If it can help, I can compare with FreeBSD 7.2.

quoted text
>

> Yes, that might give some more clues.

On 7.2 (but not on the same hardware):

ulptopen: flags=0x40

ulpt_open: open input pipe

ulpt_open: start read callout

ulptopen: done, error=0

ulpt_tick: start sc=0xc6fae000

ulpt_tick: err=1

ulpt_read_cb: start sc=0xc6fae000, err=0 n=0

ulpt_tick: start sc=0xc6fae000

ulpt_tick: err=1

ulpt_read_cb: start sc=0xc6fae000, err=0 n=0

ulptwrite

ulpt_status: status=0x18 err=0

ulptwrite: transfer 4096 bytes

ulptwrite

ulpt_status: status=0x18 err=0

ulptwrite: transfer 4096 bytes ulpt_status: status=0x18 err=0

ulptwrite: transfer 4096 bytes

ulptwrite

ulpt_status: status=0x18 err=0

ulptwrite: transfer 4096 bytes

ulpt_status: status=0x18 err=0

ulptwrite: transfer 4096 bytes

ulptwrite

ulpt_status: status=0x18 err=0

ulptwrite: transfer 4096 bytes

ulpt_tick: start sc=0xc6fae000

ulpt_tick: err=1

ulpt_read_cb: start sc=0xc6fae000, err=0 n=0

ulpt_status: status=0x18 err=0

ulptwrite: transfer 4096 bytes

...

ulptclose: closed
I've tried to change ULPT_BSIZE to 4096 (ulpt.c) on Current but there

are still some "USB_ERR_IOERROR". No luck.
Thanks!

_______________________________________________

freebsd-current@freebsd.org mailing list

http://lists.freebsd.org/mailman/listinfo/freebsd-current

To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org"