Patrick Lamaiziere wrote:

quoted text
> Le Fri, 3 Jul 2009 17:58:34 +0200,

> Hans Petter Selasky  a écrit :

>

>

>>> The printer is a Brother HL-1430 (working fine under FreeBSD since

>>> FreeBSD 4.X)

>>>

>>>

>> Did you try both:

>>

>> /dev/unlpt0 and /dev/ulpt0

>>

>

> I tried : with ulpt0 the printer does not print anything (With

> previous FreeBSD I used unlpt0): the reset disconnects the printer.

>

> ulpt0:

> on usbus0

> ulpt_attach:562: setting alternate config number: 0

> ulpt0: using bi-directional mode

> ugen0.2:  at usbus0 (disconnected)

> ulpt0: at uhub0, port 1, addr 2 (disconnected)

> ulpt_detach:653: sc=0xc3176480

> ugen0.2:  at usbus0

> ulpt0:

> on usbus0 ulpt_attach:562: setting alternate config number: 0

> ulpt0: using bi-directional mode

>   

This looks a bit like an issue I'm about to start chasing where FS

devices fed through a HS hub disconnect "spontaneously" under load.  It

doesn't look like it but to be sure there are no hubs between the host

and the printer?
    Sam
_______________________________________________

freebsd-current@freebsd.org mailing list

http://lists.freebsd.org/mailman/listinfo/freebsd-current

To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org"